AMPP Store - Products tagged with 'chloride'

Available for download

51318-10816-Development of a testing method for crevice corrosion repassivation of Ni-Cr-Mo alloys by cooling

Product Number: 51318-10816-SG

Author: Edgar C. Hornus / Martín A. Rodríguez / Ricardo M. Carranza / Raul B. Rebak

Publication Date: 2018

$20.00

This paper discusses the development and optimization of a procedure for evaluating crevice corrosion repassivation by the cooling of corroding Ni-Cr-Mo alloys.

Available for download

51318-10979-Pitting corrosion of steam generator tubing alloys in chloride solutions with thiosulfate additions

Product Number: 51318-10979-SG

Author: Abraham A. Becerra Araneda / Mariano A. Kappes / Martín A. Rodríguez / Ricardo M. Carranza

Publication Date: 2018

$20.00

Alloys UNS N06600, N06690 and N08800 are used for steam generator tubes. Pitting corrosion was studied in 0.1 to 1 M chloride solutions with additions of thiosulfate ranging from 10-4 M to 10-2 M, at room temperature. The alloys were tested in solution annealed and thermally aged conditions.

Available for download

51318-11167-Corrosion propagation of rebar embedded in low w/c binary concrete blends exposed to seawater

Product Number: 51318-11167-SG

Author: Francisco J. Presuel-Moreno / Fujian Tang

Publication Date: 2018

$20.00

The effect of high performance concrete on the corrosion behavior of steel bar in reinforced concrete (RC) specimens are experimentally investigated. Concrete specimens with the addition of fly ash, silica fume, and calcium nitrite were fabricated and tested for over 23 years.

Available for download

51318-11273-Repassivation behavior of lean duplex stainless steels in chloride and thiosulfate environments

Product Number: 51318-11273-SG

Author: Liang He / Preet M. Singh

Publication Date: 2018

$20.00

In this paper, the repassivation kinetics of lean duplex stainless steels in environments containing chloride as well as thiosulfate ions was studied through the scratch test method.

Available for download

51318-11311-Effect of n-hexane chloride and acetic acid on the stress corrosion cracking of API 5L X70 steel in ethanol fuel

Product Number: 51318-11311-SG

Author: Celia Aparecida Lino dos Santos / Gutemberg de Souza Pimenta / Zehbour Panossian

Publication Date: 2018

$20.00

Key agents that cause stress corrosion cracking on API 5L X70 steel in anhydrous fuel ethanol by statistical analysis of chemical analyses data of anhydrous-ethanol samples and data from previous stress corrosion cracking tests.

Available for download

51318-11312-Stainless steel rebar for marine environment: a study of galvanic corrosion with carbon steel rebar used in the same concrete structure

Product Number: 51318-11312-SG

Author: Juliana Lopes Cardoso / Adriana de Araujo / Mayara Stecanella Pacheco / Jose Luis Serra Ribeiro / Zehbour Panossian

Publication Date: 2018

$20.00

This work aims at comparing a performance of the UNS(1) S32304 lean-duplex stainless steel rebars in electrical contact with carbon steel rebars, both embedded in concrete subjected to a chloride ion contamination.

Available for download

51318-11338-Weathering Steel Corrosion Study at 30 sites in South Florida

Product Number: 51318-11338-SG

Author: Richard D. Granata / Mahmoud Madani

Publication Date: 2018

$20.00

A606-04 steel panels (same composition as A588 weathering steel) were exposed at 30 sites in southeast Florida for periods of up to 3.5 years. The distances of the sites from the east coastline ranged from 0.1 mi to 21 mi.

Available for download

Air Cooler Plug Gaskets Leakage During Startup

Product Number: 51320-15197-SG

Author: Cathleen Shargay, Sarah Radovcich, Amish Jani, Kuntak Daru, Jigneshkumar J. Desai

Publication Date: 2020

$20.00

Severe leakage on a high percentage of the plug gaskets on a high alloy air cooled heat exchanger during or shortly after initial startup has occurred in only a small percentage of air coolers, but has resulted in costly replacements and unit shutdowns. These problems have occurred with 304L stainless steel (SS), 316L SS and Nickel 200 gaskets, although each material also has many successful applications. The contributing factors to the leakage has included corrosion, galling and/or inadequate manufacturing steps. This paper summarizes a number of case histories and gives their root causes and solutions. The pros and cons of various gasket materials and design options are discussed, along with a proposal for additional requirements to be added to industry standards which would minimize the risks of these problems.

Available for download

Basics of Corrosion in Reinforced Concrete

Product Number: 41215-897-SG

Author: Fred Goodwin, Frank Apicella

Publication Date: 2015

$20.00

Concrete is the second most common man-made material after potable water, yet it is a complex material that is poorly understood. Steel reinforcement is added to improve the concrete's tensile strength and ductility and is initially protected by the high concrete pH and depth of cover concrete. Eventually, due to the ingress of deleterious ions, lowering of the pH from carbonation, or electrical potential changes within the steel, corrosion will occur.

Available for download

Burlington Skyway Electrochemical Chloride Extraction – 30 Years Later

Product Number: 51322-17664-SG

Author: David Whitmore, Chris Ball

Publication Date: 2022

$20.00

This paper provides an overview of the electrochemical passivation process, history of the Burlington
Skyway, description of the installation process, treatment results and up to 30 years of monitoring
results for the structure.

Available for download

Chloride Removal: Using ‘Recyclable Encapsulated Abrasive Media

Product Number: 41210-554-SG

Author: Michael Merritt

Publication Date: 2010

$20.00

This paper presents results of multiple test programs that have been performed to determine the effectiveness of recyclable encapsulated abrasive media to remove chlorides during surface preparation. Tests published in 2002 concluded that this technology consistently achieves significant reductions of chloride levels in comparison to those achieved with conventional abrasive blasting.

Available for download

Crevice Crrosion of Copper as an Engineering Barrier of High-level Radioactive Waste Containers

Product Number: 51317--9162-SG

ISBN: 9162 2017 CP

Author: Maite Ochoa

Publication Date: 2017

$20.00

This work is aimed at determining the viability of oxygen-free copper as an engineering barrier of high-level radioactive waste containers.

Products tagged with 'chloride'

Association for Materials Protection and Performance