AMPP Store - Products tagged with 'corrosion control'

Available for download

Coating of Structural Steel for Public Structures

Product Number: 41205-212-SG

Author: John C. Williams

Publication Date: 2005

$20.00

The primary structure of many outdoor baseball parks and football stadiums is exposed structural steel. These facilities are often located in major cities in areas that may present challenges in control of corrosion. The challenge is also manifested in the fact that the structural steel frame becomes an architectural feature which must be maintained as an aesthetic element.

Available for download

Combatting Corrosion in Gas Sweetening Processes: Insight from Amine Treatment Case Studies

Product Number: 51324-21052-SG

Author: Abdullah M. Alratoee; Ibrahim A. Albrahim; Ricardo S. Costa; Sayee Raghunathan

Publication Date: 2024

$40.00

Amine solutions have been widely used to remove acid gases at gas treatment units found in gas plants, refineries and other facilities. Corrosion is always a challenge for these units, particularly for carbon steel equipment or piping that are processing hot amines. Amines are noncorrosive by nature. However, once acid gases are dissolved in amines, they act as strong electrolytes, which significantly increase the susceptibly of carbon steel components to corrode. Temperature, acid gas loading, velocity, and degradation products are the primary factors that influence amine corrosion. This paper presents Saudi Aramco experience with corrosion challenges encountered in hot diethylene glycol amine (DGA) piping circuits and equipment. Corrosion was identified at two locations which are the rich amine inlet piping to stripper and the stripper column. The paper also details the adequate corrosion control measures to reduce the corrosion risk and ensure asset integrity. Furthermore, the paper discusses the maximum recommended temperature limit for rich amine streams, derived from hands-on experience and an in-house built corrosion prediction model. The results and conclusions provide valuable insights, offering a clear path forward for addressing corrosion challenges in similar amine systems and fostering a safer and more efficient operation.

Available for download

Comparing AC Study Techniques In Addressing AC Corrosion Risk

Product Number: 51322-17735-SG

Author: Perry Ross

Publication Date: 2022

$20.00

AC interference studies have become increasingly popular in an industry where shared right of ways have increased and there has been a better understanding of how AC interacts between pipelines and powerlines that are collocated with each other. While modeling software for AC interference studies have been developed since the 1990s, advancement in AC interference processes have occurred as more has been learned over the years. When performing an AC interference study there are three steps that need to be completed: field data collection, modeling, and mitigation design. Within this paper, we can compare a project from ten years ago to a project from today to understand the developments that have been made over the course of time to improve the way we develop our mitigation designs.

Available for download

Comprehensive Corrosion under Insulation (CUI) Management for Cryogenic Service: A Facility-Specific Approach with Broad Industry Implications

Product Number: 51324-21071-SG

Author: Abdullah M. Alratoee; Ricardo S. Costa; Meshary A. Al-Bahli; Faisal M. Al-Mutahhar; Mohamed A. Ahmed

Publication Date: 2024

$40.00

In the realm of corrosion management, corrosion under insulation (CUI) poses significant challenges, particularly for facilities operating in cryogenic service. A comprehensive approach to understanding and mitigating CUI risks is crucial for ensuring asset integrity, safety, and operational efficiency. This paper presents an in-depth case study of a natural gas liquids (NGL) fractionation facility, demonstrating the successful implementation of a holistic CUI management strategy applicable to a broader industry context. Notably, the facility has faced unique challenges, as some circuits have not been shut down or inspected for the past 40 years. The paper details the extensive work carried out, encompassing risk mapping, mitigation strategies, inspection planning and prioritization, and repair planning. By adopting a systematic approach, the study effectively identifies and addresses CUI risks in the facility's cryogenic service operations. The results of this research contribute to the existing body of knowledge on CUI management in cryogenic service, offering a recommended path forward for the industry to tackle CUI-related issues. By showcasing a comprehensive and adaptable approach, this paper holds great potential to foster increased safety, reliability, and efficiency in the corrosion industry, paving the way for future research and collaboration.

Available for download

Concrete Reinforcing Steel Corrosion Assessment, Re-passivation and Monitoring in an Industrial Environment

Product Number: 41211-594-SG

Author: Bruce A. Collins

Publication Date: 2011

$20.00

Four separate concrete cooling towers at a coal fired electrical generation plant exhibited reinforcing steel corrosion causing concrete deterioration. The presentation will cover investigation of the corrosion sources, determination of the corrosion control solutions, implementation of the repair construction, and review of the corrosion measurements taken to prove effectiveness of the solution.

Available for download

Considerations for Concrete Corrosion Control Alternatives

Product Number: 51217-045-SG

Author: Fred Goodwin

Publication Date: 2017

$20.00

Approximately one cubic yard of concrete is placed annually per person on the planet with existing concrete estimated to be 30 times this amount (1). This presentation will discuss the basics of concrete, the various alternatives for control of corrosion in reinforced concrete structures, including prevention, protection, and mitigation, and strategies for selection of these alternatives. The pros and cons of each technique will be reviewed as well as the applicability considerations for the life cycle of the structure.

Available for download

CorrCompilation: CO2 and H2S Metal Loss Corrosion - 10 Year Review (E-book)

Product Number: 37623-E

ISBN: 978-1-57590-350-7

Author: Yves Gunaltun

Publication Date: 2017

$137.00

Mechanism, prediction, monitoring and control of CO2 and H2S metal loss corrosion. Papers that reviewed the subject in 2006 and 2015, with the objective of reorienting research and development. 2017 NACE E-BOOK

Available for download

Corrosion Assessment to Extend Vessel Continuous Operation Subsequent to Depleted Anodes Indications

Product Number: 51323-18992-SG

Author: Muntathir M. Al-Jumaah, Usman Shahzad, Mamdouh H. Hadi

Publication Date: 2023

$20.00

In gas-oil separation plants (GOSPs), multiphase crude is separated, degassed and then dehydrated before being shipped to stabilization plants for further processing. Typically, in ageing oil fields, the crude is accompanied by large volumes of formation water that is separated in GOSPs using three-phase production traps, which are large horizontal vessels, using a gravimetric separation process where water collects and settles at the vessel’s lower part.

Available for download

Corrosion Basics An Introduction, 3rd Edition

Product Number: 37630-pdf

ISBN: 978-1-57590-444-3

Author: Pierre Roberge

Publication Date: 2018

$248.00

This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage.

2018 NACE, Third Edition, 822 pages

Corrosion Basics: An Introduction, 3rd edition

Product Number: 37630-POD

ISBN: 978-1-57590-360-6

Author: Pierre Roberge

$248.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage.

2018 NACE, Third Edition, 822 pages, hardbound, 7 x 10" trim size

Available for download

Corrosion Control and Integrity Management of Flare Gas Recovery Units

Product Number: MECC23-20160-SG

Author: Mohamed M. Farah; Abdulaziz Al-Qahtani; Ibrahim Zahrani

Publication Date: 2023

$20.00

Gas flaring is often a frequent occurrence in the oil and gas industry, where significant unrecovered gas is flared to the atmosphere with wide ranging negative environmental implications such as increased greenhouse emission, and other pollutants that have negative health implications on local populations. However, recent environmental awareness, drive to lower emission and economic benefits associated with flare gas recovery has seen a shift in flaring practice. The recovery of flared gas reduces noise and thermal radiation, operating and maintenance costs, air pollution and gas emission and reduces fuel gas and steam consumption.

Corrosion Control in Petroleum Production, 3rd Edition

Product Number: 37646-POD

ISBN: 978-1-57590-389-7

Author: Robert J. Franco & Timothy Bieri

$148.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas.

The book provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

The authors, Robert Franco and Tim Bieri, have distilled over 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference.

Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

2020 NACE, 536 pages, 6 x 9" trim size, perfect bound, color

Products tagged with 'corrosion control'

Association for Materials Protection and Performance