Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!
Corrosion under thermal insulations namely CUI (Corrosion under insulation) is a key degradation process in hydrocarbon facilities which poses asset integrity risks. 1 CUI is reported as the reason behind 40-60% of failures of the process piping in a typical oil refining facility. Speaking smaller-sized process piping (i.e., NPS < 4”), up to 81% of reported failures are known to result from CUI. 2 Monetary spending to inspect and fix CUI-related failures cost 10% of overall maintenance budget in a typical medium-sized oil refinery. 2 CUI risk is influenced by numerous operational and environmental factors which impedes its management in a typical AIM (Asset integrity management) program. The
CUI (corrosion under insulation) is a major damage mechanism affecting the integrity of process equipment, piping, and pipelines. CUI is known to create localized corrosion and pitting under thermal insulations which trigger non-linear corrosion rates and end up in unanticipated leaks in industrial assets. Reportedly, detection and management of CUI-driven damages constitute 10% of the maintenance budget in a typical refinery. This study simulates the CUI behavior of carbon steel under fibrous stone wool insulation using four testing conditions namely Isothermal wet, isothermal wet-dry, cyclic wet, and cyclic wet-dry. The weight loss of coupons under each test condition was converted into corrosion rate followed by characterization of damage modes namely pitting, uniform corrosion via microscope, and surface topography. It also compares the corrosion behaviors in closed-contacting insulation to those produced under contact-free insulation with low-point drains under similar testing conditions. Unlike closed-contacting insulations, coupons under contact-free insulation with low-point drainage resulted in uniform corrosion, insignificant pitting, and reduced corrosion rates under all testing conditions.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Use this error code for reference:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Corrosion under thermal insulations namely CUI (Corrosion under insulation) is among the key damage mechanisms which poses integrity risk to the hydrocarbon facilities. CUI is reportedly known as the reason behind 40-60% of failures in the facility piping whereas small bore piping (i.e., NPS < 4”) are even more sensitive to CUI failures, where up to 81% of reported failures in small-sized piping are known to be from CUI. Monetary spending to inspect and fix CUI-related failures cost 10% of overall maintenance budget in a typical medium-sized oil refinery. CUI risk is influenced by numerous operational and environmental factors which impedes its management in a typical AIM (Asset integrity management) program.