Menu
Search
Filters
Close
Menu

The Performance Of HPHT Corrosion Inhibitor At Offshore Downhole Sour Conditions

Picture for The Performance Of HPHT Corrosion Inhibitor At Offshore Downhole Sour Conditions
Available for download

As traditional reserves deplete onshore and offshore, the oil industry is moving into increasingly deeper waters and harsh environments in the pursuit of hydrocarbons. As the industry drills deeper, the challenges that face infrastructure increase markedly with the longstanding issues of corrosion. One of the major challenges to corrosion management is the extreme pressure and temperature.

Product Number: 51322-17752-SG
Author: Youngil Choi, Youngsun Yim, Bang Cha Rang Song, George Economopoulos
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

High pressure, high temperature (HPHT) corrosion in sour conditions is a major concern in oil and gas production. Here, the selection of corrosion inhibitor is a significant challenge in oil and gas industry. This paper presents the results using HPHT Hastelloy RC autoclave for the performance study of corrosion inhibitor with high H2S/CO2 environments and high shear stress of 25 Pa in 80 % water cut. The sour corrosion testing conditions were the combination of 16.8 bar H2S concentration and 12 bar CO2 concentration with the temperature of 121 oC. Triplicate API 5L X65 weight-loss coupons were used in the test. Some important standard tests (e.g. thermal stability, emulsification tendency, foaming tendency, and solubility) with material compatibility test (Alloy 825) were also presented. The test results show that the average corrosion rates using weight-loss coupons are less than 0.1 mm/yr with low corrosion inhibitor concentration. No pitting corrosion was observed.

High pressure, high temperature (HPHT) corrosion in sour conditions is a major concern in oil and gas production. Here, the selection of corrosion inhibitor is a significant challenge in oil and gas industry. This paper presents the results using HPHT Hastelloy RC autoclave for the performance study of corrosion inhibitor with high H2S/CO2 environments and high shear stress of 25 Pa in 80 % water cut. The sour corrosion testing conditions were the combination of 16.8 bar H2S concentration and 12 bar CO2 concentration with the temperature of 121 oC. Triplicate API 5L X65 weight-loss coupons were used in the test. Some important standard tests (e.g. thermal stability, emulsification tendency, foaming tendency, and solubility) with material compatibility test (Alloy 825) were also presented. The test results show that the average corrosion rates using weight-loss coupons are less than 0.1 mm/yr with low corrosion inhibitor concentration. No pitting corrosion was observed.

Product tags
Also Purchased
Picture for The Susceptibility Of Spheroidal Graphite Cast Iron To Hydrogen Induced Stress Cracking
Available for download

The Susceptibility Of Spheroidal Graphite Cast Iron To Hydrogen Induced Stress Cracking

Product Number: 51322-17796-SG
Author: Veronika Djupvik, Cathrine Hartung, Atle H. Qvale, Roy Johnsen, Ida Westermann
Publication Date: 2022
$20.00

Cast Iron with its ancient history, traced back to 6th century BCE1, has been used for centuries to anything from manhole covers & fire hydrants to bridges. However, the development of Spheroidal Graphite Cast Iron (SGCI) or Nodular Cast Iron, in the 1940’s, with resulting improvement in mechanical properties such as ductility and fracture toughness, paved the way for further growth in industrial usage of cast iron.2 The material has been adopted by several industries such as automotive-, nuclear-, and wind turbine industry. During the last decade, SCGI has gained increased attention as construction material for subsea equipment in offshore oil & gas production, mainly competing with welded and bolted steel assemblies.
Picture for The NH-ME Metallized Memorial Bridge
Available for download

The NH-ME Metallized Memorial Bridge

Product Number: 51322-17837-SG
Author: Jerry S. Zoller
Publication Date: 2022
$20.00

Metallizing in NH was a coating used only sparingly in the past at critical locations on two major bridges. Its greater use was severely limited by the lack of qualified applicators, absence from bridge fabricator operations, and overall excessive cost. This picture changed dramatically with the impetus of the new metallized Memorial Bridge project and the massive investment in metallizing equipment at a large local bridge fabricator that made metallizing possible for this bridge. The successful use and ten-year performance of the thermal spray coating (TSC), i.e. metallizing, on this bridge has had a significant impact on metallized New England bridges to
follow.
Picture for Toward Objective Evaluation Of FRP Corrosion Barrier Condition
Available for download

Toward Objective Evaluation Of FRP Corrosion Barrier Condition

Product Number: 51322-17669-SG
Author: Geoff Clarkson
Publication Date: 2022
$20.00

Fiber reinforced polymer (FRP) and other polymeric materials are used in many ways to reduce and manage corrosion damage for industrial, infrastructure and municipal applications. It is common practice to use the term “resin” for polymers in these materials. This paper uses polymer interchangeably with resin. This paper will also only consider glass fiber reinforcements.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support