AMPP Store - Products tagged with 'ampp annual conference + expo 2023'

Available for download

Analytical Testing Equipment for Use with Industrial Coatings

Product Number: 51323-19409-SG

Author: Steve Liebhart

Publication Date: 2023

$20.00

This paper/presentation will discuss and demonstrate some uses for several analytical tools/instruments
related to troubleshooting problems associated with industrial coatings.

Available for download

Applicability Study of Inhibitors to Corrosion Under Insulation

Product Number: 51323-19244-SG

Author: Takehiro Toyoda, Ayano Yasui, Hirotaka Mizukami, Yukinori Yanase, Toshiyuki Sunaba

Publication Date: 2023

$20.00

Corrosion Under Insulation (CUI) is the corrosion of piping or equipment under insulation that occurs when moisture ingresses the interface between insulation and piping or equipment, helping to form corrosion cells. CUI is one of the costliest problems shared by the oil and gas industries. One reason this problem has been a perennial challenge is that CUI is difficult to detect because it occurs under the insulation. And since it occurs regardless of the type of fluid in the pipe, every part of the plant would be included in the monitoring scope.

Available for download

Application of a Highly Corrosion-Resistant Nickel-Alloy in the Chemical Industry

Product Number: 51323-19183-SG

Author: Ajit Mishra, John Doyle, Vinay Deodeshmukh

Publication Date: 2023

$20.00

There are hundreds of commercially available alloys in the market, which is utilized by various industries, including chemicals producers. However, depending upon the corrosiveness of the process conditions, choices of materials of construction can be limited. One of a highly corrosive condition is acidic chloride chemistry (like, hydrochloric acid) in which only a handful of alloys (like, Ni-Cr-Mo alloys) can provide a reasonable service life, which though depends upon the amount of chloride, operating temperature, and impurities level.

Available for download

Application of Hydrogen Service Fatigue Crack Growth Rate Models to a Simulated Remaining Life Assessment of Transmission Pipeline

Product Number: 51323-19368-SG

Author: B.C. Rollins, B.N. Padgett, T.J. Prewitt, A. Chandra, S. Finneran, R. Thodla

Publication Date: 2023

$20.00

The hydrogen economy envisions the use of gaseous hydrogen (herein referred to as hydrogen) as an energy carrier for the reduction of carbon emissions. Transportation of hydrogen from the upstream source (generation location) to the end-user will be necessary to maximize the carbon reduction potential switching from natural gas to pure hydrogen or hydrogen blended natural gas products. A proposed, economically viable option is to utilize the existing and extensive natural gas pipeline infrastructure in the United States.

Available for download

Application of Machine Learning Techniques for Sand Erosion Prediction for Elbows in Multiphase Flow

Product Number: 51323-18995-SG

Author: Ronald E. Vieira, Farzin Darihaki, Jamie Li, Siamack A. Shirazi

Publication Date: 2023

$20.00

In the oil and gas industry, sand production can lead to blockage of pipelines, corrosion and erosion, which may cause the failure of the fluid transport system, pipeline leakage, and consequently environmental contamination. In the process of fluid transportation, the pipe walls are always impacted by particles entrained in flowing fluid. As a result, the corresponding erosive wear may be detrimental to pipe wall structural integrity. Although sand screens and gravel packs are frequently used to minimize sand production, technical and economic challenges or limitations with these practices are still present in the industry1.

Available for download

Application of Probabilistic Model in SCCDA

Product Number: 51323-18956-SG

Author: Francois Ayello, Ramgopal Thodla, Guanlan Liu, Narasi Sridhar

Publication Date: 2023

$20.00

Stress Corrosion Cracking (SCC) is a serious threat to our pipeline infrastructure. Past SCC failures have shown that both NN pH SCC and high pH SCC may lead to catastrophic pipeline failure. This is due to the formation of cracks that are difficult to detect. Moreover, SCC is difficult to predict, as multiple mechanisms must interact to lead to the formation of these cracks.

Available for download

Application of The Corrosion Resistant Alloy/ Carbon Steel Bimetal Pipes in Oil and Gas Field Development

Product Number: 51323-19237-SG

Author: Hang Su, Wensheng Li, Anqing Fu, Chengxian Yin

Publication Date: 2023

$20.00

Bimetal composite pipes composed of carbon steel and corrosion resistant alloys have attracted increasing attention for the applications in the fields of transferring pipes, downhole tubes, reservoirs and heat exchangers. It shows superior properties such as corrosion resistance of the corrosion resistant alloys and formability, and mechanical properties of carbon steels, which satisfy the requirements of both anti-corrosion and mechanical properties applied in oil and gas filed with an affordable price.

A series of manufacturing methods for the fabrication of bimetal composite pipes, including mechanical bonding method, welded pipe using the clad plate and inner surfacing welding clad pipe, have been applied in recent years.

Available for download

Artificial Intelligence-Based Characterization Tool for Corrosion Removal and Surface Preparation

Product Number: 51323-19564-SG

Author: Matthew A. Nakatsuka, Mark Kimura, Alexander Ventura, Ramiro Maldonado, Dylan Kobayashi, Vinod P. Veedu

Publication Date: 2023

$20.00

It is well understood that unless a surface is properly prepared prior to the application of a coating or surface treatment, adhesion and the expected lifetime of the material is quite minimal. Preparation generally falls under one of two options: either utilization of particle or grit-blasting, or the use of waterjetting. Typically, waterjetting of surfaces in preparation for application of coatings or surface treatments is only conducted on metal substrates that contain a previous profile from either operational wear (corrosion pitting) or previously abrasive blasted surfaces.

Available for download

Asset Life Extension Through Deployment of Corrosion and Inspection Technologies: Corrosion Monitoring Vs. Condition Monitoring

Product Number: 51323-19279-SG

Author: Faisal M. Al-Mutahhar, Rakan A. Al-Shebil, Ayman A. Alabdullatif

Publication Date: 2023

$20.00

As facilities in the oil and gas industry age with time, corrosion mitigation and control become more important. Failure of processing equipment is likely to entail production loss, loss of containment, environmental impact, and/or human risk. Internal corrosion failures represent one of the major risks to process equipment and piping.

Available for download

Atmospheric Corrosion Monitoring using Electrical Resistance Probes

Product Number: 51323-19271-SG

Author: Andreas Junker Olesen, Frank Fontenay, Lars Vendelbo Nielsen, Lisbeth Hilbert

Publication Date: 2023

$20.00

Atmospheric corrosion monitoring has traditionally been a lengthy and costly discipline. Visual inspection and weight loss testing is commonly applied, and this requires years of testing and on-site inspections with regular intervals. Furthermore, inspections and surveys in marine environments are troublesome, expensive and sometimes dangerous.

Available for download

Atmospheric Environment Severity Monitoring for Corrosion Management

Product Number: 51323-19464-SG

Author: Liam Agnew, Brandi Clark, Victoria Avance, Fritz Friedersdorf

Publication Date: 2023

$20.00

Corrosion costs the US Department of Defense billions of dollars annually, with the impact of corrosion estimated at $20.6B in fiscal year 2016. It continues to be one of the leading causes of aircraft unavailability and accounts for a significant portion of maintenance labor and costs. Corrosion management practices are chosen to minimize maintenance costs while maximizing the availability of an asset.

Available for download

Benefits of continuous corrosion monitoring for offshore wind structures

Product Number: 51323-19288-SG

Author: Birit Buhr, Lars Peter Løvendahl Raun, Ruth E. Sørensen, Yaser Rezania, Annika Martina Diederichs

Publication Date: 2023

$20.00

Back in 1991 the first offshore wind asset was constructed in Denmark near the coastline from Vindeby (which means windy city). This asset comprised 11 foundations with a capacity of 0.36 MW each. Since then; the offshore wind industry has been booming, and projects are becoming bigger and bigger in size (capacity), number of foundations per site and further and further offshore.

Products tagged with 'ampp annual conference + expo 2023'

Association for Materials Protection and Performance