Menu
Search
Filters
Close
Menu

Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!

Products tagged with 'hydrogen embrittlement'

View as
Sort by
Display per page
Picture for The Application of Zinc-Nickel for Corrosion Resistance Applications
Available for download

The Application of Zinc-Nickel for Corrosion Resistance Applications

Product Number: 51323-19347-SG
Author: Sarah Medeiros
Publication Date: 2023
$20.00

Electroplating is a coating technique used to apply a metallic deposit to alter the properties of the substrate surface. Traditional electroplating involves submerging a part into a tank of electrolyte plating solution and passing a current between the part and an anode, any area that should not be plated must be masked off. Brush electroplating is a portable method of electroplating localized areas without the use of an immersion tank.
Picture for The Combined Influences of Microstructure, Strength, and Titanium Content on the Hydrogen Stress Cracking Resistance of Precipitation Hardened Nickel Alloys
Available for download

The Combined Influences of Microstructure, Strength, and Titanium Content on the Hydrogen Stress Cracking Resistance of Precipitation Hardened Nickel Alloys

Product Number: 51323-19348-SG
Author: Stephen A. McCoy, E. Buddy Damm, Brian A. Baker, William MacDonald
Publication Date: 2023
$20.00

Precipitation hardenable nickel alloys N09925, N07718, N09945, N09946 and N07725 provide high strength and excellent sour service corrosion resistance for critical downhole oilfield applications. This family of alloys achieves yield strength minimums ranging from 120 to 160 KSI (827-1103 MPa) and can withstand high temperatures and partial pressures of H2S. The primary strengthening mechanism is the formation of γ’ and γ” nanometer sized particles during an age hardening heat treatment.
Picture for The Effects of Additive Manufacturing on the Hydrogen Embrittlement of Alloy 718
Available for download

The Effects of Additive Manufacturing on the Hydrogen Embrittlement of Alloy 718

Product Number: 51323-19358-SG
Author: W. Fassett Hickey, John H. Macha, Brendy Rincon Troconis, Thomas Dobrowolski, Wei Chen
Publication Date: 2023
$20.00

Parts produced via additive manufacturing (AM) are being adopted broadly among many industries and
used in an array of applications. AM parts are attractive to these industries for several reasons. Complex
geometries that cannot be manufactured using traditional, subtractive methods can be produced
additively.
The History of Hydrogen Induced Stress Cracking (HISC) Failures Due to Cathodic Charging of Duplex Stainless Steels (DSS)
Available for download

The History Of Hydrogen Induced Stress Cracking (HISC) Failures Of Duplex & Super Duplex Stainless Steels (DSS/ SDSS) Due To Cathodic Charging And The Potential For Improvement In HISC Resistance

Product Number: 51322-18070-SG
Author: Glenn Byrne, G. Warburton, R Francis
Publication Date: 2022
$20.00

As long ago as 1973, design codes1 considered the possibility of hydrogen embrittlement due to CP. Between 1986 and 19952-4 the failure of DSS fasteners subjected to CP were reported. These were associated with high ferrite levels in the steel (approximately 70%) combined with precipitation hardening at 475°C to give the high levels of strength desired for fastener applications.  At the same time, the susceptibility of DSS welds to hydrogen embrittlement had been reported5. Just like the fastener failures, the hydrogen cracking of welds was associated with high ferrite levels (70%), highly restrained joints and in the case of welds, high levels of diffusible hydrogen. 
Picture for The Mechanical Behavior of Hydrogen Charged Beryllium Copper
Available for download

The Mechanical Behavior of Hydrogen Charged Beryllium Copper

Product Number: 51386-86171-SG
Author: Turn, J.C. Jr.; Ratka, J.O
Publication Date: 1986
$20.00
Picture for The Susceptibility Of Spheroidal Graphite Cast Iron To Hydrogen Induced Stress Cracking
Available for download

The Susceptibility Of Spheroidal Graphite Cast Iron To Hydrogen Induced Stress Cracking

Product Number: 51322-17796-SG
Author: Veronika Djupvik, Cathrine Hartung, Atle H. Qvale, Roy Johnsen, Ida Westermann
Publication Date: 2022
$20.00

Cast Iron with its ancient history, traced back to 6th century BCE1, has been used for centuries to anything from manhole covers & fire hydrants to bridges. However, the development of Spheroidal Graphite Cast Iron (SGCI) or Nodular Cast Iron, in the 1940’s, with resulting improvement in mechanical properties such as ductility and fracture toughness, paved the way for further growth in industrial usage of cast iron.2 The material has been adopted by several industries such as automotive-, nuclear-, and wind turbine industry. During the last decade, SCGI has gained increased attention as construction material for subsea equipment in offshore oil & gas production, mainly competing with welded and bolted steel assemblies.
Picture for UNS N08935 – A New Versatile Grade for O&G
Available for download

UNS N08935 – A New Versatile Grade for O&G

Product Number: 51321-16314-SG
Author: Ulf H. Kivisäkk/Daniel Gullberg/Katarina Persson
Publication Date: 2021
$20.00
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support