Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Pilot Rig Scale Testing: Hydrodynamics And Scale Deposition

Picture for Pilot Rig Scale Testing: Hydrodynamics And Scale Deposition
Available for download
Product Number: 51321-16699-SG
Author: Neil Goodwin; Mark May; Amarpreet Kaur; & Gordon M. Graham
Publication Date: 2021
$0.00
$20.00
$20.00

Hydrodynamic factors, such as shear stress and turbulence, are known to affect scale deposition and
corrosion in oilfield production systems. Systems in which the configuration promotes sudden changes
in the degree of turbulence can be particularly susceptible to scale deposition problems, as is often
observed in chokes, pumps, valves and (most relevant here) in the vicinity of inflow controls devices
(ICDs).
This paper documents the development of pilot rig testing methodology, which aims to achieve far more
field-realistic flow regimes than typically obtained in laboratory tests, and applies it to the study of scaling
phenomena in and around ICDs, using up to 8000 liters (L) of scaling brine flowing through the system
on a single-pass basis at a fluid flow of 10 L/min. Custom designed and manufactured test pieces were
incorporated into the rig to determine the extent and location of scale deposition as a function of varying
wall shear stress. Interpretation of the observations was enhanced through the use of computational
fluid dynamics (CFD) to quantify and assess the contribution of various hydrodynamic factors on scale
deposition.
The work therefore demonstrates the effectiveness of pilot-rig test methodologies for use in oilfield
applications where the influence of the hydrodynamic regime is likely to be significant. Moreover, by
showing how the scaling results correlate with CFD predictions, it increases the confidence that design
decisions based upon laboratory tests will be valid under field conditions.

Hydrodynamic factors, such as shear stress and turbulence, are known to affect scale deposition and
corrosion in oilfield production systems. Systems in which the configuration promotes sudden changes
in the degree of turbulence can be particularly susceptible to scale deposition problems, as is often
observed in chokes, pumps, valves and (most relevant here) in the vicinity of inflow controls devices
(ICDs).
This paper documents the development of pilot rig testing methodology, which aims to achieve far more
field-realistic flow regimes than typically obtained in laboratory tests, and applies it to the study of scaling
phenomena in and around ICDs, using up to 8000 liters (L) of scaling brine flowing through the system
on a single-pass basis at a fluid flow of 10 L/min. Custom designed and manufactured test pieces were
incorporated into the rig to determine the extent and location of scale deposition as a function of varying
wall shear stress. Interpretation of the observations was enhanced through the use of computational
fluid dynamics (CFD) to quantify and assess the contribution of various hydrodynamic factors on scale
deposition.
The work therefore demonstrates the effectiveness of pilot-rig test methodologies for use in oilfield
applications where the influence of the hydrodynamic regime is likely to be significant. Moreover, by
showing how the scaling results correlate with CFD predictions, it increases the confidence that design
decisions based upon laboratory tests will be valid under field conditions.

Product tags
Also Purchased
Picture for 98711 DESIGN AND MAINTENANCE CONSIDERATIONS FOR
Available for download

98711 DESIGN AND MAINTENANCE CONSIDERATIONS FOR CORROSION CONTROL IN CLOSED CIRCULATING WATER SYSTEMS

Product Number: 51300-98711-SG
ISBN: 98711 1998 CP
Author: Kent W. Smothers
$20.00
Picture for 04322 A Multi-Discipline Approach to Closed
Available for download

04322 Darrell Hartwick, Don Hutchinson, and Mylene Langevin, Buckman Laboratories

Product Number: 51300-04322-SG
ISBN: 04322 2004 cp
Author: Darrell Hartwick, Don Hutchinson, and Mylene Langevin, Buckman Laboratories
Publication Date: 2004
$20.00

Traditionally, closed system treatment programs have involved adding corrosion inhibitor and
periodically testing for the residual. To be effective, these treatment programs must also
include cleaning.  This paper will discuss the various aspects that should be evaluated as part of a closed system treatment program.

 
Picture for 03068SOLVING CLOSED COOLING WATER CORROSION
Available for download

03068 SOLVING CLOSED COOLING WATER CORROSION PROBLEMS

Product Number: 51300-03068-SG
ISBN: 03068 2003 CP
Author: Paul R. Puckorius, John J. Sims
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support