AMPP Store - Coatings and Linings

Available for download

SP0516-2016, “Guidelines for Data Collection and Analysis of Railroad Tank Car Interior Coating/Lining Condition”

Product Number: 21408-SG

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Guidelines for inspecting, rating & documenting the condition of interior coatings and linings in tank cars. Complying with regulations. Examples, forms and a tank car map. May apply to other containers.

Available for download

SP0892-2007-SG (formerly RP0892), Coatings and Linings over Concrete for Chemical Immersion and Containment Service

Product Number: 21060-SG

ISBN: 1-57590-136-6

Publication Date: 2007

$109.00

A guide for personnel who prepare specifications, standards, and procedures for protective coatings of concrete surfaces. Based on best current knowledge and experience.

Available for download

Spatial Variation Analysis Of Localized Corrosion Of Steel Bar With Spectral Analysis Technique

Product Number: 51322-17792-SG

Author: Fujian Tang, Lizhi Zhao, Hong-Nan Li, Zhibin Lin, Hong Pan, Els Verstrynge, Charlotte Van Steen

Publication Date: 2022

$20.00

Chloride-induced corrosion of steel reinforcement in concrete structures usually experiences two stages: pitting corrosion initiation and propagation.1-2 Initiation of pitting corrosion occurs as the chloride content on the surface of a steel bar exceeds a critical value (or chloride threshold) and breaks down the passive film locally.^3-4 Depending on environmental factors at the steel-concrete interface, such as temperature, moisture, and availability of oxygen, pitting corrosion initiation is not stable in the very beginning and some corrosion pits may continue to develop and become stable, while others cease.

Available for download

Specifying Concrete Coating Projects in Water and Wastewater Treatment Structures

Product Number: 41215-915-SG

Author: Manuel Najar

Publication Date: 2015

$20.00

There are several design factors that need to be considered when specifying coatings in water and wastewater concrete structures. Issues include treating surfaces with exposed aggregate, with a low pH, and exposed reinforcing steel. This paper will present three examples of important design considerations based on field experiences that can avert lining performance problems and impacts on a project schedule or budget. Specific examples from a number of projects will be used to illustrate these design considerations.

Available for download

Spherical Tank External Coating Simplified Strong Teamwork

Product Number: 41206-255-SG

Author: Robert G. Johnson

Publication Date: 2006

$20.00

The goal of this presentation is to highlight the teamwork exhibited by a quality driven facility owner who led an outsourced contract team consisting of pre-qualified contractors, material suppliers, and certified technical service specialists as independent third-party inspectors, to provide external protective coatings to a set of six spherical tanks encompassing approximately 100,000 s.f. each.

Available for download

Spread of Corrosion Assessment on Flexible Elastomeric Insulation Systems in a Continuous Salt-Water Spray Environment

Product Number: 51317--8907-SG

ISBN: 8907 2017 CP

Author: Luis Mario Rodriguez

Publication Date: 2017

$20.00

Details of a test procedure jointly developed by TNO/Endures, Netherlands to assess the long term performance of insulation systems when a damaged section of the system is subject to a continuous salt-water spray environment.

Available for download

SSPC Protective Coatings Glossary-2011

Product Number: SSPC Protective Coatings Glossary-2011

Publication Date: 2011

$0.00

This glossary was compiled for a diverse audience within the protective coatings industry. This 2011 version includes over 1,500 technical and general industry terms for use by facility owners and their engineering personnel; specification writers; construction contractors and subcontractors; manufacturers of raw materials, finished product for cleaning and coating, and surface preparation and application equipment; and coating industry consultants.

Available for download

SSPC- SP 6/NACE No. 3-2006, Commercial Blast Cleaning

Product Number: 21067-SG

ISBN: 1-57590-109-9

Publication Date: 2006

$109.00

Requirements for "Commercial" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-CS 23.00/AWS C2.23M/NACE No. 12, “Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel”

Product Number: 21100-SG

ISBN: 0-87171713-1

Publication Date: 2016

$109.00

Application of zinc and aluminum alloys to steel substrates using thermal spray, referred to as “metalizing” or “thermal spray coatings” (TSCs). Preparation, application, measurement, sealers and topcoats.

Available for download

SSPC-Guide 12-2016, Guide to Illumination of Industrial Coating Projects

Product Number: SSPC-Guide 12-2016

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-Guide 18-2022, Specifier’s Guide for Determining Containment Class and Environmental Monitoring Strategies for Lead Paint Removal Projects

Product Number: SSPC-GUIDE 18-2022

Publication Date: 2022

$109.00

This Guide describes a six-step process to assist in determining the type of containment system and the level of environmental monitoring that should be specified on a project-specific basis when removing coatings that contain lead. The selection of the containment and monitoring strategies is based on an assessment of the type of paint removal method that will be used and the potential impact of the operations on the public, other workers in the area, and the environment. Note that local and state codes and regulations must be reviewed and take precedence to any guidance provided in this document.

The guidance provided in this document also applies to coatings containing other hazardous metals such as cadmium and chromium; however, the recommended analytical monitoring is often based on an analysis for lead. Paint chip sampling and testing for lead and other hazardous metals should be undertaken to properly characterize the paint being removed.

This Guide does not cover the selection of paint removal methods, or design of containment/ventilation systems.

Available for download

SSPC-Guide 22-2022, Use and Retention of Pre-Construction Primers on Steel In Shipbuilding

Product Number: SSPC-Guide 22-2022

Publication Date: 2022

$109.00

This guide provides the specifier and user with information regarding the use of pre-construction primers (PCPs) on structural steel in shipbuilding. It provides background on the reasons to use and retain PCPs, the types of PCPs and their application and inspection, and the secondary surface preparation processes that are used when PCPs are retained in the final, compatible primary coating system. While this document contains details specific to the shipbuilding industry, the technical concepts related to the application and retention of PCP may apply to other industrial applications.

Coatings and Linings

Association for Materials Protection and Performance