AMPP Store - Coatings and Linings

Available for download

SSPC-Paint 43-2024, Direct-to-Metal Aliphatic Polyurea Coating, Performance-Based

Product Number: SSPC-Paint 43-2024

Publication Date: 2024

$109.00

This standard was originally developed to provide performance criteria for fast-drying aliphatic polyurea coatings that are applied in single-coat direct-to-metal applications with good color and gloss retention. These criteria include UV exposure, accelerated corrosion, and other physical properties such as adhesion and impact resistance. It is intended for specifiers and coating manufacturers to use as a reference when specifying or producing these coatings. A similar standard for aliphatic polyurea coatings in topcoat applications can be found in SSPC-Paint 39.

Available for download

SSPC-QP 5-2022. Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection Companies

Product Number: SSPC-QP 5-2022

Publication Date: 2022

$109.00

This standard describes a method for evaluating the qualifications of coating and lining inspection companies who perform quality control or quality assurance inspection of applied coatings and linings.

The purpose of this procedure is to determine whether a coating inspection company has a corporate organization that clearly defines the authority and responsibilities of positions typically required for operation of a Coating Inspection Company, employs qualified management and inspection personnel, has established and implemented a viable quality management system, and has knowledge of industry technical standards and inspection practices.

This standard is a part of the AMPP accreditation program for firms. Although the standard references certifications and qualifications for individuals, those certifications and qualifications are administered through separate programs.

Available for download

SSPC-SP 10 (WAB)/NACE No. 2 (WAB)-2015, “Near-White Metal Wet Abrasive Blast Cleaning”

Product Number: 21197-SG

Publication Date: 2015

$109.00

This standard, SSPC-SP 10 (WAB)/NACE WAB-2, defines the "Near-White Metal" level of surface cleanliness for wet abrasive methods. Other levels in overview below.

Available for download

SSPC-SP 10 /NACE No. 2-2006, Near-White Metal Blast Cleaning

Product Number: 21066-SG

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. Requirements for "Near-White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024

Publication Date: 2024

$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a) to remove material from the surface that can cause early failure of the coating, and

b) to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

Degree of Surface Cleanliness	Designation
White Metal Blast Cleaning	SSPC-SP5/NACE No. 1
Near-White Metal Blast Cleaning	SSPC-SP10/NACE No. 2
Commercial Blast Cleaning	SSPC-SP6/NACE No. 3
Industrial Blast Cleaning	SSPC-SP14/NACE No. 8
Brush-Off Blast Cleaning	SSPC-SP7/NACE No. 4
Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance	SSPC-SP18

Available for download

SSPC-SP 13/NACE No. 6-2003, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2003

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2024

$109.00

This AMPP standard covers the preparation of concrete surfaces before the application of protective coating or lining systems. This standard should be used by specifiers, applicators, inspectors, and others who are responsible for defining a standard degree of cleanliness, strength, profile, and dryness of prepared concrete surfaces.

Available for download

SSPC-SP 14 (WAB)/NACE WAB-8-2015, “Industrial Wet Abrasive Blast Cleaning”

Product Number: 21400-SG

ISBN: 1-57590-325-3

Publication Date: 2015

$109.00

This standard, SSPC-SP 14 (WAB)/NACE WAB-8, defines the "Industrial" level of surface cleanliness for wet abrasive methods. Other levels in overview below.

Available for download

SSPC-SP 14/NACE No. 8-2006, Industrial Blast Cleaning

Product Number: 21088-SG

ISBN: 1-57590-077-7

$109.00

Requirements for "Industrial" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 16-2010, Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals

Product Number: SSPC-SP 16-2010

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This standard covers surface preparation of coated or uncoated metal surfaces other than carbon steel prior to the application of a protective coating system. Surface preparation using this standard is used to uniformly roughen and clean the bare substrate and to roughen the surface of intact coatings on these metals prior to coating application. Substrates that may be prepared by this method include, but are not limited to, galvanized surfaces, stainless steel, copper, aluminum, and brass. For the purpose of this standard, the zinc metal layer of hot-dip galvanized steel is considered to be the substrate, rather than the underlying steel. This standard is not to be used for cleaning coated or uncoated carbon steel substrates.

Available for download

SSPC-SP 2-2018, Hand Tool Cleaning

Product Number: SSPC-SP 2-2018

Publication Date: 2018

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-SP 2-2024, Hand Tool Cleaning

Product Number: SSPC-SP 2-2024

Publication Date: 2024

$109.00

Hand tool cleaning is a method of removing loosely adherent foreign matter from steel substrates using hand-held tools without supplemental power.

Coatings and Linings

Association for Materials Protection and Performance