AMPP Store - Coatings and Linings

Available for download

Raising the Standard for Bridge Coatings in the State of Florida

Product Number: 41206-224-SG

Author: Karen Byram

Publication Date: 2006

$20.00

This presentation discusses how the Florida Department of Transportation has modified and amended its coatings material acceptance policy and contractor coating application requirements to improve corrosion protection of Florida’s transportation infrastructure. The cost saving advantages to the State are estimated to range from $2.3 to 19 million/year

Available for download

Rapid Return to Service

Product Number: 41206-223-SG

Author: Kirby Buesing

Publication Date: 2006

$20.00

This presentation will high light the new ultra-high solids tank lining products and discuss the equipment necessary to properly apply them, giving owners the ability to return their tank to service in a very short time frame.

Available for download

Recent Failures Of Accelerated High Temperature Sulfidation Corrosion In The Oil Refining Industry

Product Number: 51321-16738-SG

Author: Hyungjin Lee, Hyeonsu Chae, Junmo Yang, Jaeseung Kim, Taehyung Kim, Taehyun Choi, Sungsu Cho, Moonyoung Lee, Homin Yun Jongun Lee, Hyeongkeun Choi, Gyutae Park, Hyunjoon Park, Seongyong Jang, Sunhyuk Bae, Jaewoong Kim

Publication Date: 2021

$20.00

High temperature sulfidation is one of the oldest damage mechanisms in the refining process such as crude distillation unit, vacuum distillation unit and hydroprocessing unit. Since corrosion proceeds to general corrosion and occurs in a high temperature environment, it is a type of corrosion that can lead to a large fire explosion when a leak occurs.

Available for download

Re-Evaluating Electrochemical Impedance Spectroscopy (EIS) for the Field Inspector’s Toolbox: A First Approach

Product Number: 41214-837-SG

Author: Bobbi Jo Merten, Allen Skaja, David Tordonato, Daryl Little

Publication Date: 2014

$20.00

Electrochemical Impedance Spectroscopy (EIS) has maintained a presence in protective coatings laboratories for decades. EIS is valuable in that it captures resistive and capacitive changes to a coating film as it is exposed to the environmental conditions that produce these changes, i.e., degradations. It also assists in ranking coating systems for their anticipated corrosion protection performance, complementing qualitative, visual observations.

Available for download

Refinement Of Citric Acid Passivation Methods And Comparison To Traditional Nitric Acid Based Chemistries

Product Number: 51322-17628-SG

Author: David G. Enos, Derek Wichhart

Publication Date: 2022

$20.00

Traditional solutions for the chemical passivation of stainless steel are nitric acid based, with the addition of sodium dichromate as an inhibitor for precipitation hardened and free machining stainless steels. These passivation chemistries are difficult to handle from an environmental health and safety point of view, particularly the dichromate inhibited versions. Citric acid passivation has been pursued as a replacement for both nitric acid and inhibited nitric acid based chemistries for many years, and has been incorporated into consensus specifications such as ASTM A967 and SAE AMS2700.

Available for download

Repainting Monumental Buildings

Product Number: 41206-246-SG

Author: Paul P. Greigger

Publication Date: 2006

$20.00

Metal curtain wall and extrusions in prominent office buildings may need to be repainted either because the original factory applied finishes have dulled or because the owner wants to give the building a fresh look. Many monumental buildings are constructed with factory painted aluminum or steel cladding (curtain wall) and window extrusions. These buildings need to be repainted with field applied coatings that match the appearance and durability of the factory finishes.

Available for download

Repair Coatings for TSA

Product Number: 51317--9369-SG

ISBN: 9369 2017 CP

Author: Ole Knudsen

Publication Date: 2017

$20.00

Thermally sprayed aluminium (TSA) has successfully been used for corrosion protection for several decades. In this investigation different repair coatings have been studied with respect to performance when applied on both TSA and bare steel.

Available for download

Replica Tape- A Source of New Surface Profile Information

Product Number: 41214-808-SG

Author: David Beamish

Publication Date: 2014

$20.00

Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings. The resultant surface profile, sometimes called an anchor pattern, is comprised of a complex pattern of peaks and valleys, which must be accurately assessed to ensure compliance with job or contract specifications.

Available for download

Replica Tape- Relating 3 Surface Profile Parameters to Pull-Off Adhesion

Product Number: 41215-878-SG

Author: David Beamish

Publication Date: 2015

$20.00

Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings. The resultant surface profile must be accurately assessed to ensure compliance with job or contract specifications. But is profile height alone (the most commonly measured parameter) a good indicator of long-term coating performance?

Available for download

Research On Cluster Well Group Casing Cathodic Protection For Field Test And Optimization Of Anode Bed

Product Number: 51322-17724-SG

Author: Dawei Zhuang, Qian Zhao, Yanxia Du, Xiaoyong Wang, Qiongwei Li

Publication Date: 2022

$20.00

Deep well casing is an important part of oilfield production. In the long service life of well casing, corrosion can result in wall thinning and even perforation of the casing due to contacting with soil, water and other naturally occurring substances within the formation. The most economic and effective method to decrease corrosion of well casing is cathodic protection (CP). However, the vertical depth of casing is several kilometers, and CP current requirements of casing in different layers are quite different. At the same time, the conductivity of different formations will affect the distribution of CP current.

Available for download

Resistance of U-bend and Integral Finned Duplex Stainless Steel UNS-S32205 and UNS-S32750 to Sulfide Stress Corrosion Cracking

Product Number: 51322-18038-SG

Author: Karen Picker, Luiza Esteves, Yong-Joo Kim

Publication Date: 2022

$20.00

The use of Duplex Stainless Steels (DSS) in refinery sour environments is governed by ANSI/NACE MR0103/ISO 17945NACE “Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments” which limits DSS base materials to be used in Hydrogen Sulfide (H2S) services to a maximum hardness of 28 HRC for materials with a PREN ≤ 40 and to a maximum hardness of 32 HRC for those materials with PREN > 40.¹ These hardness values are in line with the hardness requirements of solution annealed as produced straight tubes, but when the heat exchanger design requires the use of integral finning or u-bend tubes, these are subject to significant work hardening that results in as bent and as finned heat exchanger tubes with hardness measurement as high as 418 HV0.5 or 35.6 HRC which clearly exceeds the allowable limits stated above.

Available for download

Restoration of Historic Architectural Tiffany Metalwork Relies on HighPerformance, Environmentally Safe Coating System for Long-Lasting Protection

Product Number: 41214-872-SG

Author: Kurt Wood, Vince Casmirri, Tami Lasseter Clare

Publication Date: 2014

$20.00

Caretakers of outdoor monuments, sculptures and high-value architectural metalwork face formidable preservation challenges. Durable, low-maintenance coatings are needed that provide longer-lasting protection against corrosion and degradation, while being safe for the environment. We describe work done in collaboration with conservators at the Philadelphia Museum of Art, and Portland State University, to develop water-based fluoropolymer coatings that meet the critical needs of the conservation and architectural communities.

Coatings and Linings

Association for Materials Protection and Performance