Menu
Search
Filters
Close
Menu

TM0399-HD1999-Standard Test Method for Phosphonate in Brine-HD1999

Picture for TM0399-Standard Test Method for Phosphonate in Brine-HD1999
Available for download

Colorimetric determination of phosphonate in the range of 0.1 to 5 mg/L in brines from gas and oil production operations, water injection/disposal operations, and other industrial applications. Historical Document 1999

Product Number: 21089-HD1999
ISBN: 1-57590-084-X
Publication Date: 1999
Industry: Test Method
$179.00
$179.00
$179.00

This standard test method is intended for use in determinations of low concentrations of phosphonate residuals in brines from oil and gas operations and other industrial sources. This standard is intended for use by oil and gas operators, service companies, and others to determine residual phosphonate concentrations in systems being treated with phosphonate inhibitors to monitor their treating program and provide data relative to treatment or re-treatment options. Organic phosphonate compounds are commonly contained in the chemical treatments used as mineral scale and corrosion inhibitors in oil and gas operations, water injection/disposal operations, and other industrial applications. The test method set forth in this standard was developed at Rice University(1) under the direction of Dr. Mason Tomson 1 with funding for the work provided by the Gas Research Institute (GRl) This standard was prepared by Task Group T-1D-52, a component of Unit Committee T-1D on Corrosion Monitoring and Control of Corrosion Environments in Petroleum Production Operations, and is issued by NACE International under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production. This test method is also being reviewed by the

American Society for Testing and Materials (ASTM) for approval as a standard method.

 This standard covers the colorimetric determination of phosphonate in the range of 0.1 to 5 mg/L in brines from gas and oil production operations, water injection/disposal operations, and other industrial applications. If the brine contains more than 5 mg/L phosphonate, the sample shall be diluted and analyzed by this procedure. Additional information can be found in APll4l RP 45.

Historical Document 1999

This standard test method is intended for use in determinations of low concentrations of phosphonate residuals in brines from oil and gas operations and other industrial sources. This standard is intended for use by oil and gas operators, service companies, and others to determine residual phosphonate concentrations in systems being treated with phosphonate inhibitors to monitor their treating program and provide data relative to treatment or re-treatment options. Organic phosphonate compounds are commonly contained in the chemical treatments used as mineral scale and corrosion inhibitors in oil and gas operations, water injection/disposal operations, and other industrial applications. The test method set forth in this standard was developed at Rice University(1) under the direction of Dr. Mason Tomson 1 with funding for the work provided by the Gas Research Institute (GRl) This standard was prepared by Task Group T-1D-52, a component of Unit Committee T-1D on Corrosion Monitoring and Control of Corrosion Environments in Petroleum Production Operations, and is issued by NACE International under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production. This test method is also being reviewed by the

American Society for Testing and Materials (ASTM) for approval as a standard method.

 This standard covers the colorimetric determination of phosphonate in the range of 0.1 to 5 mg/L in brines from gas and oil production operations, water injection/disposal operations, and other industrial applications. If the brine contains more than 5 mg/L phosphonate, the sample shall be diluted and analyzed by this procedure. Additional information can be found in APll4l RP 45.

Historical Document 1999

Product tags
Also Purchased
Picture for TM0498-Standard Test Methods for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes-HD1998
Available for download

TM0498-HD1998-SG Standard Test Methods for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes-HD1998

Product Number: 21235-HD1998
ISBN: 1-57590-058-0
Author: NACE International
Publication Date: 1998
$179.00

Two recommended methods for measuring the relative carburization resistance of alloys for tubes…in ethylene cracking furnaces, or for assessing the performance of these tubes after service. Historical Document 1998
Picture for RP0386-Application of a Coating System to Interior Surfaces of Covered Hopper Rail Cars in Plastic, Food, and Chemical Service-HD1997
Available for download

RP0386-HD1997-SG Application of a Coating System to Interior Surfaces of Covered Hopper Rail Cars in Plastic, Food, and Chemical Service-HD1997

Product Number: 21033-HD1997
ISBN: 1-57590-053-X
Author: NACE International
Publication Date: 1997
$179.00

This standard describes a procedure for the application of a coating system to the interior surfaces of covered steel hopper rail cars used primarily in the plastic, food, and chemical industries. Historical Document 1997
Picture for RP0388-Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks-HD1990
Available for download

RP0388-1990, Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

Product Number: 53069-HD1990
Author: NACE International
Publication Date: 1990
$179.00

Accepted procedures for applying impressed current cathodic protection to the internal submerged surfaces of steel tanks used for the storage of natural waters. Historical Document 1990
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support