Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

RP0286-HD1997-SG Electrical Isolation of Cathodically Protected Pipelines-HD1997

Picture for RP0286-Electrical Isolation of Cathodically Protected Pipelines-HD1997
Available for download

The importance of pipeline electrical isolation in achieving and maintaining adequate, reliable, and economical corrosion control. Types of devices used for isolation; precautions to be observed; and selection of devices…Historical Document 1997

Product Number: 21032-HD1997
ISBN: 1-57590-041-6
Author: NACE International
Publication Date: 1997
Industries: Cathodic Protection , Pipelines, Tanks, and Underground Systems
$179.00
$179.00
$179.00

The importance of pipeline electrical isolation in achieving and maintaining adequate, reliable, and economical corrosion control. Types of devices used for isolation; precautions to be observed; and selection of devices…Historical Document 1997

 

1.1 This standard explains the importance of pipeline electrical isolation in achieving and maintaining adequate, reliable, and economical corrosion control. The standard outlines the types of devices used for isolation; precautions to be observed; and selection of devices based on pipeline characteristics, site, and contents. The standard describes isolating flanges, gaskets, sleeves, washers, joints, unions, couplings, and spools, and discusses materials for pipeline casing isolation. Installation, field testing, and maintenance of isolating devices are also included.

This standard describes the application of isolating devices intended only for cathodic protection purposes where voltages across the isolating device are 1 to 2 volts 4 DC and the AC exposure does not exceed 15 volts rms. This standard does not discuss situations in which isolating devices are incorporated purely for safety reasons; in those situations, reference should be made to relevant electrical safety codes. Isolating devices shall not be used in enclosed areas where combustible atmospheres are likely to be present.

1.2 Isolation of cathodically protected pipelines is recommended to minimize current requirements, facilitate testing and troubleshooting, and improve current distribution.

 

This standard recommended practice is to be used in conjunction with the latest revisions of NACE Standards RP0169, "Control of External Corrosion on Underground or Submerged Metallic Piping Systems"; RP0675, "Control of Corrosion on Offshore Steel Pipelines"; and RP0177, "Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems."

 

Each of these standards refers to electrical isolation or isolation joints, but details are not provided. This standard, which was prepared to supplement those standards, provides engineers, designers, and technical personnel dealing with pipelines the necessary information to electrically isolate cathodically protected pipelines.

This standard was originally prepared in 1986 by NACE International Task Group T-10A-15 on Electrical Isolation of Cathodically Protected Pipelines, a component of Unit Committee T-10A on Cathodic Protection, and was issued by NACE under the auspices of Group Committee T-10 on Underground Corrosion Control. The standard was revised in 1997, the current issue.

 

Historical Document 1997

The importance of pipeline electrical isolation in achieving and maintaining adequate, reliable, and economical corrosion control. Types of devices used for isolation; precautions to be observed; and selection of devices…Historical Document 1997

 

1.1 This standard explains the importance of pipeline electrical isolation in achieving and maintaining adequate, reliable, and economical corrosion control. The standard outlines the types of devices used for isolation; precautions to be observed; and selection of devices based on pipeline characteristics, site, and contents. The standard describes isolating flanges, gaskets, sleeves, washers, joints, unions, couplings, and spools, and discusses materials for pipeline casing isolation. Installation, field testing, and maintenance of isolating devices are also included.

This standard describes the application of isolating devices intended only for cathodic protection purposes where voltages across the isolating device are 1 to 2 volts 4 DC and the AC exposure does not exceed 15 volts rms. This standard does not discuss situations in which isolating devices are incorporated purely for safety reasons; in those situations, reference should be made to relevant electrical safety codes. Isolating devices shall not be used in enclosed areas where combustible atmospheres are likely to be present.

1.2 Isolation of cathodically protected pipelines is recommended to minimize current requirements, facilitate testing and troubleshooting, and improve current distribution.

 

This standard recommended practice is to be used in conjunction with the latest revisions of NACE Standards RP0169, "Control of External Corrosion on Underground or Submerged Metallic Piping Systems"; RP0675, "Control of Corrosion on Offshore Steel Pipelines"; and RP0177, "Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems."

 

Each of these standards refers to electrical isolation or isolation joints, but details are not provided. This standard, which was prepared to supplement those standards, provides engineers, designers, and technical personnel dealing with pipelines the necessary information to electrically isolate cathodically protected pipelines.

This standard was originally prepared in 1986 by NACE International Task Group T-10A-15 on Electrical Isolation of Cathodically Protected Pipelines, a component of Unit Committee T-10A on Cathodic Protection, and was issued by NACE under the auspices of Group Committee T-10 on Underground Corrosion Control. The standard was revised in 1997, the current issue.

 

Historical Document 1997

Product tags
Also Purchased
Picture for RP0475-1998 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations
Available for download

RP0475-1998 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations

Product Number: 21014-SG
Publication Date: 1998
$179.00

HISTORICAL DOCUMENT. THIS RECOMMENDED PRACTICE HAS BEEN WITHDRAWN BY NACE INTERNATIONAL. This NACE standard recommended practice is a guide for selecting corrosion-resistant materials for the supply, storage, pumping, and injection of water encountered in oilfield operations where external or subsea exposure to salt water is not a consideration.

This recommended practice is made available for reference only.

Previous versions:

RP0475-1991

RP0475-1975
Picture for RP0303-2003
Available for download

RP0303-2003, Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

Product Number: 21101-SG
ISBN: 1-57590-177-3
Publication Date: 2003
$179.00

HISTORICAL DOCUMENT. Field-applied heat-shrinkable sleeve systems. Qualifying and controlling the quality of a heat-shrinkable sleeve. Proper application, inspection and repair techniques to ensure its long-term performance.
Picture for SP0207-2007
Available for download

SP0207-2007, Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines

Product Number: 21121-SG
ISBN: 1-57590-211-7
Publication Date: 2007
$109.00

Presents procedures for performing close-interval DC pipe-to-electrolyte potential surveys on buried or submerged metallic pipelines.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support