AMPP Store - Products tagged with 'ampp annual conference + expo'

Available for download

Biocide Compatibility with Oxygen Scavenger: A Case Study from Oil Field

Product Number: 51323-19112-SG

Author: Abdul Wahab Al-Ahmad, Adel Jubar Al-Mutairi, Fatma Jassim Behbehani, Ali Mohammed Akrouf, Ashok Mathew

Publication Date: 2023

$20.00

Kuwait is among the ten top oil producing countries in the world. The state run Kuwait Oil Company produces crude oil through more than 5000 wells spread across the company’s South-East, North and West Kuwait asset areas. The crude oil produced along with saline water and gases (carbon dioxide, hydrogen sulfide & hydrocarbon gas) is received at manifold headers at Gathering Centers (GC).

Available for download

Biocide Resistance in Microbes – An Oilfield Example

Product Number: 51323-19122-SG

Author: Nazima Habibi, Saif Uddin, Abdul Hameed Al-Hashem, Anisha Shajan, Nasreem Abdul Razzack, Farhana Zakir

Publication Date: 2023

$20.00

Biocorrosion causes huge economic losses to the oil and gas industry.

Available for download

Biocide sustainability impacts Improve seawater pipeline integrity, HSE and groundwater withdrawal avoidance

Product Number: 51323-18991-SG

Author: Juan F. Hernandez, Ridha H. Abbas, Vinicius Giorgetti, Fahad N. Abeedi

Publication Date: 2023

$20.00

Uncontrolled microbial growth in oilfield systems leads to costly problems such as fouling, plugging,
corrosion and souring. It also directly impacts the safe operation, economic performance and
environmental compliance in all areas of production, transportation, refining and distribution. To reduce
the damaging effect of microbial growth; the oil industry typically uses a variety of toxic organic and
inorganic chemicals (biocides) to treat affected systems

Available for download

Biofuels: Lining Systems for a Diverse Array of Sustainably Derived Feedstocks

Product Number: 51323-19061-SG

Author: Mike O’Donoghue, Vijay Datta

Publication Date: 2023

$20.00

A biofuel can be described as any fuel where bio-based renewables like oils and fats, organic waste, crops like corn or sugar cane, and algae, etc., are used as precursor feedstocks.

Increasingly, the production of biofuels from biomass is very much part of a global impetus for an energy transition to a “carbon neutral” world. The goal is to reduce the carbon footprint and ensure that sustainable energy from bio-based feedstocks realistically lowers reliance on energy produced from fossil fuels.

Available for download

Boiler And Fired Heater's Real-Time Creep Life Prediction

Product Number: 51323-19571-SG

Author: Ts. Hashim Othman, Ir. Ts. Hambali Chik, Nurul Hana Kamaruzaman

Publication Date: 2023

$20.00

Creep is a continuous degradation of metal under applied stress at high temperature with critical factors of temperature, stress, type of material and exposure time. Most of our steam boilers and fired heaters tubes are operating within or sometimes operated slightly above the creep threshold temperature with an inherent potential risk of stress rupture if not being monitored properly. Traditionally, degradation rates (i.e., creep damage) of these components can only be assessed during shutdown through non-destructive testing (NDT) to determine the metallurgical conditions upon exposure to elevated temperatures.

Available for download

Building an Oil and Water Partitioning Model for Corrosion Inhibitor Dosage Based on Novel Residual Technique

Product Number: 51323-19205-SG

Author: Peng Jin, Tracey Jackson, Haitao Fang, Lei Huang, Gaoxiang Wu, Ramsey Smith, Yao Xiong, Renita Nnoli

Publication Date: 2023

$20.00

In the production of oil and gas, corrosion inhibitor (CI) is usually dosed into multiphase flows (oil/water/gas). The partitioning behavior of CI among the different phases is a critical factor for a successful application. Unreliable measurement of CI residuals can lead to inaccurate dosing, overtreatment, and higher operating costs.

Available for download

Bulk Anode Advancements in Sacrificial Cathodic Protection Jackets

Product Number: 51323-19161-SG

Author: Matt Miltenberger, Sameer Telang, Jason Chodachek

Publication Date: 2023

$20.00

Zinc Tidal CP jackets have been utilized to protect the splash zone of steel reinforced concrete piles against aggressive corrosion due to seawater exposure since the mid 1990’s. Galvanic CP jackets are installed on piles in the splash zone and provide galvanic current to the jacketed areas (Figure 1). The submerged portion of the pile that extends below the jacket is always exposed to seawater.

Available for download

Calcite Formation and Inhibition Under CO2 Corrosion Environment

Product Number: 51323-19227-SG

Author: Wei Li, Xin Wang, Yuqing Ye, Amy Kan, Mason Tomson

Publication Date: 2023

$20.00

Metal-carbonate scales are a double-edged sword for upstream oil and gas production engineering. On one hand, many of these scales can lead to serious setbacks if untreated, such as production interruption. One common example is calcite scale deposition on production tubing.

Available for download

Can Tarpaulin (TARP) Covering Protect Pipeline Coating FBE System 1a From UV Degradation?

Product Number: 51323-18938-SG

Author: Aissa VanDerVeen, Jeffrey Rogozinski, Thomas E. Grauer, Amal Al-Borno, Yuan Li, Moavin Islam, Ski Yin

Publication Date: 2023

$20.00

Fusion bonded epoxy (FBE) coated pipelines are extensively used throughout the world for transportation of various types of fluids and gases1. New and unused FBE coated pipes often end up being stockpiled in open yards for various reasons such as delay in start of a project, excess inventory etc. Outdoor exposure for long durations results in the physical and chemical degradation of the coating. This happens due to the interaction of the oxygen and moisture in the air, and the ultraviolet (UV) radiation from the sun which causes photo-oxidative degradation of the polymer in the coating.

Available for download

Case Studies On ECDA and SCCDA

Product Number: 51323-19231-SG

Author: Vignesh Shankar

Publication Date: 2023

$20.00

Pipelines have been considered one of the safest methods of transporting energy from one place to another. This is achieved through a systematically planned, documented, and comprehensive pipeline integrity management (PIM) program. PIM covers areas such as engineering, operations, inspections and maintenance, health and safety, and environment protection.

Available for download

Case Study - AC Mitigation Design without Powerline Data

Product Number: 51323-18983-SG

Author: Baotong Lu, Hui Yu, Bryan Barker

Publication Date: 2023

$20.00

Pipeline corrosion may result from alternating current (AC) interferences from various sources, for example, high voltage AC (HVAC) transmission lines collocated with pipelines. AC mitigation is necessary to minimize corrosion risk, as well as personnel hazard, if intensity of AC interferences, normally characterized as AC induced voltage and current density, exceeds certain thresholds. Field readings of AC induced voltage and AC current density obtained from test points along a pipeline are often regarded as indicators of such risks.

Available for download

Case Study On The Failure Of Polyurea Elastomer (PU) Coating in a Sea Water Storage Tank

Product Number: 51323-19160-SG

Author: Ahmad Raza Khan Rana, George Jarjoura, Syed Umair Niaz Bukhari

Publication Date: 2023

$20.00

Protective coatings are widely used for shielding metal surfaces against service-induced degradations. Immersion-grade coatings protect the metal surfaces by hindering the interaction of steel (i.e., substrate) with service thereby providing corrosion and even abrasion resistance. Coatings nowadays are the most efficient method to shield metals and thus has been widely engaged among various protective techniques.

Products tagged with 'ampp annual conference + expo'

Association for Materials Protection and Performance