AMPP Store - Products tagged with 'ampp annual conference + expo'

Available for download

The Effects of Additive Manufacturing on the Hydrogen Embrittlement of Alloy 718

Product Number: 51323-19358-SG

Author: W. Fassett Hickey, John H. Macha, Brendy Rincon Troconis, Thomas Dobrowolski, Wei Chen

Publication Date: 2023

$20.00

Parts produced via additive manufacturing (AM) are being adopted broadly among many industries and
used in an array of applications. AM parts are attractive to these industries for several reasons. Complex
geometries that cannot be manufactured using traditional, subtractive methods can be produced
additively.

Available for download

The Evaluation Of Corrosion Behavior Of Austenitic Stainless Steels And Ni-Based Alloys In Molten Salts Under Isothermal And Thermal Cycling For Condition Concentrated Solar Power Plants

Product Number: 51322-17529-SG

Author: Qingyang Liu, Richard Barker, Chun Wang, Jiong Qian, Anne Neville, Frederick Pessu

Publication Date: 2022

$20.00

The drive towards renewable energy, requirement for reduction in fossil fuel consumption and emission of carbon dioxide has received substantial attention from governments and researchers worldwide during the last few decades [1]. The exploration of renewable sources of energy has been grouped into wind, geothermal, tidal and solar energy. Solar energy has shown great promise due to the abundant amount of energy reaching the Earth [2, 3]. Electricity generation from solar irradiation can be achieved by photovoltaic (PV) and photothermal conversion [4].

Available for download

The Impact of Oxygen Related Black Solids in Oil and Gas Production Systems

Product Number: 51323-18942-SG

Author: Miriam Barber, Adedamola Adelusi, Stefano Tassinari

Publication Date: 2023

$20.00

Previous studies have shown that the presence of oxygen in wet carbon steel pipelines can present a major integrity management issue. The presence of O2 in the process accelerates corrosion rates and has been identified as a major culprit in the formation of black solids in gas transmission pipelines.

Available for download

The Implementation of a Corrosion Management System (CMS) in an Operating Gold Mine – Lessons Learned

Product Number: 51323-19385-SG

Author: Muan Wei, Noelia Diaz, Zoe Coull

Publication Date: 2023

$20.00

In 2001 the UK Health and Safety Executive published “Review of Corrosion Management for Offshore Technology Report 2001/00”. This was the first document related to corrosion management system (CMS), which was updated in March 2019 and incorporated the PDCA (Plan-do-check-act) approach. However, the topic of CMS reached its peak after NACE published “NACE IMPACT Study” in 2016.

Available for download

The Importance of Developing Leadership Competency in Corrosion Management

Product Number: 51323-19477-SG

Author: Zoe Coull, Noelia Diaz, Muan Wei

Publication Date: 2023

$20.00

Leadership is the ability to motivate and inspire people towards achieving a positive change. Leadership starts with an awareness of self and is driven by a deep understanding of both personal values and the values of wider teams and organizations.

Often leadership is confused with the skill of management, which is defined here as the ability to develop and action structured plans, processes, procedures to achieve required outcomes within defined constraints and with specific resources.

Available for download

The Influence of Electrochemical Potential and Stress-Level on Trench Nucleation on Ni-Bearing Low Alloy Steels in Sour Environments

Product Number: 51323-19030-SG

Author: Dannisa R. Chalfoun, Mariano A. Kappes, Teresa E. Perez, Mariano Iannuzzi, José Luis Otegui, Ricardo M. Carranza

Publication Date: 2023

$20.00

The presence of trenches on low alloy steels (LAS) in sour environments at the open circuit potential (OCP) has been reported since 1977. Originally, they were classified as deep and elongated localized corrosion pits. Recently, many authors have referred to them as “stress-induced grooves.

Available for download

The influence of flash rust-preventing inhibitors on the performance of corrosion protective coatings

Product Number: 51323-19327-SG

Author: Anders W. B. Skilbred, Jeferson De Oliveira, Andreas Løken

Publication Date: 2023

$20.00

Water jetting is frequently used as a surface preparation method mainly during maintenance. However, water-jetted surfaces are prone to the formation of flash rust in the time interval between surface preparation and coating application. The formation of flash rust increases with increasing temperature, relative humidity, and salt contamination concentration on the surface.

Available for download

The Interaction of Quaternary Ammonium Compounds based Corrosion Inhibitor with Carbon Steel in CO2 Saturated NaCl Solution

Product Number: 51323-19515-SG

Author: Magdalena Eskinja, Gregor Mori, Masoud Moshtaghi, Stefan Hönig, Gerald Zehethofer

Publication Date: 2023

$20.00

Carbon steel is commonly used as a material for pipelines in oil and gas industry for facilities such as flowlines, down hole tubulars, transmission pipelines. Wide use of carbon steel is conventional due to its economic feasibility, however this kind of steel faces significant internal corrosion problems with corrosion rates reaching up to 10 mm/y if there is exclusion of protective methods. In oil and gas industry such carbon steel pipelines are utilized for transportation of hydrocarbons where they are simultaneously exposed to the co-generated acidic gases (carbon dioxide (CO2) and hydrogen sulphide (H2S)) and water.

Available for download

The Performance of Phenolic Epoxy Coating after Thermal Exposure for Corrosion Protection in Marine Environments

Product Number: 51323-19046-SG

Author: S. Ahmed, T. Becker, Y. Hou, K. Lepkova, T. Pojtanabuntoeng

Publication Date: 2023

$20.00

Organic coating is the most widely used method of corrosion protection. its corrosion protective abilities depend on physical, chemical and mechanical properties including adhesion to a substrate and essential barrier properties against corrosive species, such as water and oxygen. The durability of corrosion protection coatings is evaluated based on their effectiveness in providing long-term protection to metallic substrates when these materials are exposed to aggressive corrosion environments.

Available for download

The Performance Tests of HPHT Corrosion Inhibitor at Onshore Downhole Sour Conditions

Product Number: 51323-19242-SG

Author: Heonyeong Song, Kwanghyung Lee, Bang Cha Rang Song, Junpeng Xue

Publication Date: 2023

$20.00

Nowadays, oil and gas fields containing a high concentration of CO2 and H2S at high temperatures are being operated in many areas. Here, internal corrosion control under these conditions has become one of the significant challenges in oil and gas production wells and a major cause of severe corrosion–related material failure in the industry.

Internal corrosion of the pipelines turns out to be a critical threat to the initial stage of production.

Available for download

The Risk of Using Cathodic Metallic Coatings on Carbon Steel for Internal Corrosion Protection in Corrosive Environments

Product Number: 51323-19042-SG

Author: Moavin Islam, Amal Al-Borno

Publication Date: 2023

$20.00

Metallic coatings are frequently used on carbon steel and other metallic and non-metallic substrates for corrosion control, decorative or aesthetic purposes. The coating metal commonly used includes Zn, Al, Cu, Ni, Cr, Ag, Au, etc., singly or sometime in combination. When one of these metal coatings is applied on a metallic substrate, it is very important to consider the relative positions of the coating material and the substrate in the galvanic or EMF series.

Available for download

The Study of Correlation between Coating Thickness and Long-term Durability Performance Applied to Storage Tank

Product Number: 51323-18815-SG

Author: Chuljung Kim, Dongkuk Kim, Taek-ki Kang

Publication Date: 2023

$20.00

In the Oil and Gas plant industry, coating plays an important role in increasing added value for the purpose of providing product functionality and protecting products as the final stage of all work.
In particular, heavy-duty coating refers to a coating system that can withstand severe corrosive environments such as sea, underwater, and coastal industrial areas, and has a durability of at least 20 years for structures that are difficult to repair environmentally and economically.

Products tagged with 'ampp annual conference + expo'

Association for Materials Protection and Performance