AMPP Store - Products tagged with 'thermal insulation'

Available for download

51317--9550-Challenges in Providing Effective Cathodic Protection to Thermally Insulated Pipeline Risers

Product Number: 51317--9550-SG

ISBN: 9550 2017 CP

Author: Stephen Gibson

Publication Date: 2017

$20.00

Specific challenges encountered in the application of CP to thermally insulated pipeline risers in northern Alberta (Canada). The CP issues resulting from the use and installation of thermal insulation, resistance heating (heat trace), and other instrumentation are discussed.

Available for download

A High Performance Thermal Insulative Coating For Personnel Protection

Product Number: 51323-18941-SG

Author: Naoki Maruyama

Publication Date: 2023

$20.00

In industrial plants such as oil & gas and chemical plants, the plant piping is covered with insulative materials such as mineral wools and metal cladding for thermal insulation. The piping under insulation is subject to more severe corrosive environment than that exposed to the outdoor, due to rainwater entering through the cladding joints and condensation caused by temperature fluctuation. In addition, since the piping is covered with the insulation materials, it is impossible to identify the corrosion from the outside, increasing the risk of leakage accidents due to delays in corrosion mitigations.

Available for download

Assessing Coating Breakdown Factors of Silicone Rubber Thermal Insulation for Enhanced Cathodic Protection in Subsea Equipment Operations

Product Number: 51324-20350-SG

Author: Herman E Amaya; Behrang Fahimi; John Bogard

Publication Date: 2024

$40.00

This study seeks to redefine coating breakdown factors for thermal insulation coatings, whose unique electrical insulation properties have been previously overlooked in DNV RP B401, resulting in potential miscalculations in anode requirements for cathodic protection systems.1 By comparing the insulation's performance with standards like DNV RP B401 and ISO 15589-2, and through testing and analysis, this study presents refined breakdown factors and insights into optimized anode placement in subsea structures like trees and manifolds.

Available for download

Case Study of the Premature Coating Failure on the Boiler Tubes

Product Number: 51324-21187-SG

Author: Ahmad Raza Khan Rana; George Jarjoura; Shahzad Karim; Syed Umair Niaz Bukhari

Publication Date: 2024

$40.00

Boiler tubes in the penthouse portions are meant to extract the heat from the flue gases. The tube material and coatings on the boiler tubes are generally selected to mitigate the high-temperature oxidation and other metallurgical damage mechanisms. Tubes are not designed to experience aqueous corrosion from the external environment. For these reasons, boilers are designed and laid out in a fashion to limit the ingress of moisture and corrosive ions from external sources such as wind, cooling tower drift, etc. This paper addresses the case study on the failure of primer coating on the boiler tubes from the upset condition that allowed the flooding inside the penthouse leading to aggressive corrosion on the tube skin. This paper also discusses the multiple corrosion modes observed and their associated mechanisms followed by recommending corrective measures. Finally, the paper addresses the contribution of insulation material in heterogeneous corrosion morphologies.

Available for download

CUI Management Through Moisture Barrier System And Field Assessment

Product Number: 51321-16914-SG

Author: Ahmad Raza Khan Rana; Graham Brigham; Andrew Buchanan

Publication Date: 2021

$20.00

Available for download

RP0198-2004 (Chinese), The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

Product Number: 21116-SG

ISBN: 1-57590-049-1

Publication Date: 2004

$179.00

保温和防火材料下的腐蚀控制系统方法的推荐做法

DOWNLOADABLE HISTORICAL DOCUMENT. Current technology and practices for mitigating corrosion under thermal insulation and fireproofing materials.

Available for download

Thermal Insulating Coatings – The Future of Insulation: Thermal Insulating Coatings not only retain energy, but also protect substrates and personnel

Product Number: 41212-711-SG

Author: Michael Stelmach

Publication Date: 2012

$20.00

Thermal Insulating Coatings are a relatively young technology but are gaining worldwide acceptance quickly due to their energy retention capabilities, easy application, ability to protect substrates, reducing maintenance and personnel protection costs. Not to be confused with reflective roof coatings, TICs use all 5 thermal dynamic blocking agents (or principles) to reduce thermal transfer between environments.

Products tagged with 'thermal insulation'

51317--9550-Challenges in Providing Effective Cathodic Protection to Thermally Insulated Pipeline Risers

A High Performance Thermal Insulative Coating For Personnel Protection

Assessing Coating Breakdown Factors of Silicone Rubber Thermal Insulation for Enhanced Cathodic Protection in Subsea Equipment Operations

Case Study of the Premature Coating Failure on the Boiler Tubes

CUI Management Through Moisture Barrier System And Field Assessment

RP0198-2004 (Chinese), The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

Thermal Insulating Coatings – The Future of Insulation: Thermal Insulating Coatings not only retain energy, but also protect substrates and personnel

Association for Materials Protection and Performance