AMPP Store - Products tagged with 'nickel alloys'

Available for download

09153 Control of Metal Dusting Using Alloy Selection, Coatings and Inhibitors

Product Number: 51300-09153-SG

ISBN: 09153 2009 CP

Author: Brian Chambers, Rafael J. Rengifo and Dale McIntyre

Publication Date: 2009

$20.00

This study reports the results of laboratory investigations in pressurized high-temperature carbon-rich environments simulating operations in syngas production and root cause failure analysis and laboratory analysis simulations in refinery platformer operations. The results rank a variety of stainless steels and Ni alloys.

Available for download

51316-7344-Effect of Cycle Frequency on the Oxidation Resistance of Ni- and Fe-based Alloys at 982oC

Product Number: 51316-7344-SG

ISBN: 7344 2016 CP

Author: Joseph Meyer

Publication Date: 2016

$20.00

This paper focuses on short-term oxidation testing (1,000 hours) of Ni- and Fe based heat-resistant alloys in flowing air with varying cycle frequencies (1, 10, and 168 hours) at 982 °C. The alloys tested were ranked based on weight change behavior and metal recession measurements.

Available for download

51317--9639-The Performance of Corrosion Resistant Ni-Cr-Mo Alloys in Concentrated Hydrochloric Acid

Product Number: 51317--9639-SG

ISBN: 9639 2017 CP

Author: Suresh Divi

Publication Date: 2017

$20.00

This paper is to study the corrosion performance of various Ni based alloys in high concentrations of HCl acids below the boiling point. Nickel-based alloys C-276 (UNS N10276), C-22 (UNS N06022), C-2000 (UNS N06200), Hybrid-BC1 (UNS N10362) and B-3 (UNS N10675) were investigated.

Available for download

51317--9655-The Effect of Hydrogen on Plain and Notched Test Specimens of PH Nickel Alloys

Product Number: 51317--9655-SG

ISBN: 9655 2017 CP

Author: Stephen McCoy

Publication Date: 2017

$20.00

This paper reviews previous work and shows laboratory results using different test techniques to demonstrate the influence of yield strength and microstructure on the resistance to Hydrogen Stress Cracking of precipitation hardenable Nickel alloys N07718, N09925, N07725, N09945 and N09946.

Available for download

51318-11600-Material selection and recent case histories with nickel alloys

Product Number: 51318-11600-SG

Author: Helena Alves

Publication Date: 2018

$20.00

The aim of this paper is to review the main aspects of the material selection for the chemical process industry (CPI) and present different examples to illustrate the material selection process.

Available for download

AMPP SP21541-2023, Recommendations for Material Selection and Welding for Optimum Corrosion Resistance in Washwater Discharge Stub Pipe in Marine Exhaust Gas Cleaning Systems (Scrubbers)

Product Number: AMPP SP21541-2023

Publication Date: 2023

$109.00

This AMPP standard practice provides information for the material selection and welding procedures needed for optimum corrosion resistance of washwater discharge stub pipe in marine exhaust gas cleaning systems (EGCS, also known as scrubbers). The intended audience of the standard is shipyards, scrubber system manufacturers, installers, marine engineering firms, classification societies, flag state representatives (e.g., U.S. Coast Guard), ship owners, and ship operators.

Available for download

AMPP TR21448-2021, Corrosion Prevention and Control for Marine Scrubbers

Product Number: AMPP TR21448-2021

Publication Date: 2021

$109.00

This Technical Report provides sound technical information on the corrosion risk of exhaust gas scrubbers to ship owners, shipyards, marine engineers, scrubber designers and suppliers. Marine scrubbers used on ships are mainly wet scrubbers, which are open-loop, closed-loop, or hybrid types. Each system is discussed with respect to a description of each type of scrubber, washwater environments, materials of construction (metals and non-metals), pitfalls of inspection, fabrication, and welding of metals, service performance and applications history including descriptions of corrosion failures and successes, and repair and maintenance guidance.

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$180.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Product Number: 21305-HD2010

ISBN: 1-57590-168-4

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This NACE Standard establishes material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments, i.e., environments that contain wet hydrogen sulfide (H2S). It is intended to be used by refineries, equipment manufacturers, engineering contractors, and construction contractors.

Available for download

Application of a Highly Corrosion-Resistant Nickel-Alloy in the Chemical Industry

Product Number: 51323-19183-SG

Author: Ajit Mishra, John Doyle, Vinay Deodeshmukh

Publication Date: 2023

$20.00

There are hundreds of commercially available alloys in the market, which is utilized by various industries, including chemicals producers. However, depending upon the corrosiveness of the process conditions, choices of materials of construction can be limited. One of a highly corrosive condition is acidic chloride chemistry (like, hydrochloric acid) in which only a handful of alloys (like, Ni-Cr-Mo alloys) can provide a reasonable service life, which though depends upon the amount of chloride, operating temperature, and impurities level.

Available for download

Comparison of Pitting and Crevice Corrosion - The Effect of Alloying Elements

Product Number: 51317--8975-SG

ISBN: 8975 2017 CP

Author: Brian DeForce

Publication Date: 2017

$20.00

Corrosion resistance of stainless steels and nickel alloys is due to alloying elements. The most important elements are Cr, Mo, N and sometimes W. This paper compares the effect of these elements in pitting and crevice corrosion.

Products tagged with 'nickel alloys'

Association for Materials Protection and Performance