AMPP Store - Products tagged with 'monitoring'

Available for download

Installed UT Sensors for Continuous Corrosion Monitoring: Better Understanding How Process Changes Influence Corrosion Rates

Product Number: 51321-16228-SG

Author: Mitchell Gribi

Publication Date: 2021

$20.00

Available for download

IOW Analysis With Installed UT Sensors: How Process Changes Impact Corrosion Rates

Product Number: 51322-17611-SG

Author: Mitchell Gribi, Rebecca Henderson, Ivan Morales, Rebecca Franco, Zackary Lerch

Publication Date: 2022

$20.00

Many asset owners struggle to identify the root cause of fluctuating corrosion rates due to unreliable inspection data. Facilities worldwide are tasked with monitoring thousands of Condition Monitoring Locations (CMLs) with established NDE techniques such as manual ultrasonic testing and radiography. While these techniques can provide valuable “snapshots” of the condition of particular locations, limitations and inherent errors can compound leading to ill-advised decision making. Manually taken thickness data can vary greatly and result in unwarranted complacency or excessive and costly inspections.

Available for download

IOW Analysis with Wireless UT Sensors: How Changes Impact Corrosion Rates

Product Number: MECC23-20018-SG

Author: Steve Strachan; Mitch Gribi

Publication Date: 2023

$20.00

Many asset owners struggle to identify the root cause of fluctuating corrosion rates due to unreliable, infrequent, or sheer lacks of quantity of inspection data to make informed decisions on asset health. Facilities worldwide are tasked with monitoring thousands of Condition Monitoring Locations (CMLs) with established NDE techniques such as manual ultrasonic testing and radiography. While these techniques can provide valuable “snapshots” of the condition of particular locations, limitations and inherent errors can compound leading to ill-advised decision making.

Available for download

Long Term (20 Years) In-Service Performance of Concrete ICCP of Marine Wharf Structures in Australia

Product Number: 51320-14510-SG

Author: W. Green, S. Masia, N. Cambourn, J. Katen

Publication Date: 2020

$20.00

Impressed current cathodic protection (ICCP) is one corrosion management approach adopted by the Port of Newcastle (PoN) for their reinforced concrete wharves. The Port’s West Basin 3 wharf, has ICCP systems installed to select substructure concrete elements (beams). The West Basin 3 ICCP system to the front beam soffit section was installed in 1998 (rear beam soffit sections having been protected from 2014). Other ICCP systems have also been installed by the PoN during the period 2002 to 2005 for the West Basin Wharf 4, East Basin (1 & 2) wharves and the Kooragang K2 wharf. This paper provides background to the different ICCP systems utilized and details performance results for the West Basin 3 front beam ICCP system dating back more than 20 years. Monitoring results are presented and discussed. Performance assessment to protection criteria is undertaken and the CP system maintenance requirements are summarized.

Available for download

Managing Corrosion Risk in Carbon Capture and Storage Facilities Using Non-Intrusive Monitoring Technologies

Product Number: 51323-18856-SG

Author: William Fazackerley

Publication Date: 2023

$20.00

Carbon capture and storage (CCS) or utilisation (CCU) of the captured carbon dioxide (CO2) are tools for reducing global carbon emissions, and to combat climate change both are required. According to the IEA1, in 2021, the global capacity of CCS grew by 48%i, showing that this technology is becoming more popular to meet sustainability targets.

Available for download

Managing Risk in Sustainable Aviation Fuel and Renewable Diesel Production with Online Corrosion Monitoring

Product Number: 51324-20579-SG

Author: William Fazackerley

Publication Date: 2024

$40.00

The adoption of renewable feedstocks by refiners is driven by a variety of factors, including regulatory compliance, sustainability, and diversification of their product portfolio. However, the introduction of these feedstocks poses significant risks due to their chemical differences compared to traditional crude feedstocks. To address these risks, many refiners have undertaken costly conversion projects to protect their plants from damage caused by these new feedstocks. In addition, refiners are increasingly turning to online integrity sensors to quickly detect corrosion and mitigate unwanted risk, helping to ensure that their critical assets remain healthy and reliable. With these strategies in place, refiners can effectively manage the challenges of incorporating “bio” feedstocks into their refining processes while ensuring the safety and longevity of their equipment. This paper will feature a case study from a major European refiner who have converted an old hydroprocessing unit into producing sustainable fuels from 100% bio feedstock.

Available for download

Monitoring Evaluating and Control of Corrosion and Scaling in Higher Pressure Industrial Boilers

Product Number: 51317--8988-SG

ISBN: 8988 2017 CP

Author: John Kelly

Publication Date: 2017

$20.00

The author has utilized two types of instruments in conducting hydrogen studies. Hydrogen analyzers are used extensively in both the laboratory and in industrial steam generating plants. This is a collection of five case studies.

Available for download

NACE SP0192-2023, Monitoring Corrosion in Oil and Gas Production with Iron Counts

Product Number: NACE SP0192-2023

Publication Date: 2023

$109.00

This standard practice describes the use of iron counts as a corrosion-monitoring method and some common problems encountered when using this method. This standard is a guide for those designing corrosion-monitoring programs as well as those carrying out the programs in the field.

Available for download

NACE SP0499-2022, Corrosion Control and Monitoring in Seawater Injection Systems

Product Number: NACE SP0499-2022

Publication Date: 2022

$109.00

This AMPP standard practice provides guidance in controlling and monitoring for corrosion, bacteria, and water quality to corrosion engineers, field corrosion, production, technical, and operating personnel, and others involved in corrosion control of seawater injection systems. This standard includes descriptions of equipment and practices for controlling and monitoring corrosion in seawater injection systems. This standard does not cover all corrosion monitoring methods including but not limited to: Periodic External UT and Downhole inspection tools.

Available for download

Review of Cathodic Protection Systems for Concrete Structures in Australia

Product Number: 51317--9024-SG

ISBN: 9024 2017 CP

Author: Atef Cheaitani

Publication Date: 2017

$20.00

A case study of a major CP system operating in Australia for 15 years and proposal of a series of changes to current practices which can be considered for implementation in the design, installation and monitoring stages of new impressed current cathodic protection systems in concrete.

Available for download

RP0189-HD1995-SG Online Monitoring of Cooling Waters-HD1995

Product Number: 21041-HD1995

Publication Date: 1995

$179.00

This NACE Standard describes a variety of devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems.

Available for download

RP0189-HD2002-SG Online Monitoring of Cooling Waters-HD2002

Product Number: 21041-HD2002

ISBN: 1-57590-159-5

Author: NACE International

Publication Date: 2002

$179.00

Devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems. Methods for collecting test data to determine fouling and corrosion rates. Historical Document 2002

Products tagged with 'monitoring'

Association for Materials Protection and Performance