Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.
During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.
Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!
In context of acceptability of 17-4 PH in sour service, an literature survey of complex metallurgy of this grade was done following a mechanical rupture in service. In addition, three 17-4 PH materials were studied in terms of microstructure, mechanical properties and susceptibility to sulfide stress cracking.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Nickel-base alloys 718, 725, and 925 are commonly used in oil and natural gas production. Being heavily alloyed multi-component systems; these materials require special consideration for processing and heat treatments. This paper shows the effect of intergranular precipitates on mechanical properties and slow strain rate (SSR) test results in sour oil patch environments.
Stress Corrosion Cracking in the weld and heat affected zones of Duplex Stainless Steels has been experienced in different industries. In this paper, an attempt has been made to study the various aspects of this type of corrosion, brought about by welding. Results show duplex stainless steel base metal is also susceptible.
Corrosion and stress corroson cracking (SCC) susceptibility of duplex stainless steels (DSS) depend on alloy composition, microstructure and temperature. In this study the effect of sulfide containing caustic environment and material properties (DSS composition and microstructure) on the corrosion and SCC of DSS in pulping liquors (synthetic white liquor) was evaluated.
This paper presents a failure of a material that was overloaded during testing although the raw material was approved based on certified mechanical properties. The failure was due to unsuitable microstructures.
Fatigue Crack Growth Rate (FCGR) and fracture toughness behavior of high strength steels used in drilling riser applications was investigated in sour environments. Frequency scan tests were performed were performed on X80 C110 and S135 in moderate to mildly sour environments.
Current test regimes and acceptance levels as concerns the strong detrimental influence on toughness and corrosion resistance of intermetallic particles (IMP) in the microstructure of duplex stainless steels.
A multicomponent High Entropy Alloy (HEA) CoCrFeNiMo processed with vacuum arc remelting procedure was tested for corrosion in geothermal environment in the Reykjanes Geothermal Power Plant in Iceland.
A series of NACE TM0177 Tensile Test Method A tests were conducted on various commercially available chromium-manganese austenitic stainless steels as well as 17-4PH in the 110ksi-to-130ksi yield strength range (34 - 35 HRC max).
Lightweight structural composites were processed using a melt approach. Microstructural characterization was conducted using optical and scanning electron microscopy. Phase determination was carried out using X-ray diffraction.