AMPP Store - Products tagged with 'cathodic protection'

Available for download

Corrosion Basics An Introduction, 3rd Edition

Product Number: 37630-pdf

ISBN: 978-1-57590-444-3

Author: Pierre Roberge

Publication Date: 2018

$248.00

This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage.

2018 NACE, Third Edition, 822 pages

Available for download

Corrosion Basics: An Introduction, 3rd Edition (E-Book)

Product Number: 37630-E

ISBN: 978-1-57590-360-6

Author: Pierre Roberge

$248.00

NEW EDITION! This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage. Third Edition. 2018 NACE E-BOOK.

Corrosion Basics: An Introduction, 3rd edition

Product Number: 37630-POD

ISBN: 978-1-57590-360-6

Author: Pierre Roberge

$248.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage.

2018 NACE, Third Edition, 822 pages, hardbound, 7 x 10" trim size

Corrosion Basics-Chapter 2: Electrochemistry of Corrosion

Product Number: 37630-Ch02

$125.00

Much of the experience and many of the workable solutions developed in one area of corrosion work can be used to improve the control procedures of another area. While most people work in only one area of this total discipline, there is always the possibility that a shift in responsibilities or interest brings one to work in a completely different area of corrosion prevention and control.

AMPP's Corrosion Basics: An Introduction is renowned inside (and out of) the corrosion industry for its general coverage of the ever-increasing field of corrosion control.

Chapter 2, "Electrochemistry of Corrosion," of Corrosion Basics is fundamental to an understanding of why and how metals corrode. In fact, the author suggests that the "reader proceed through this chapter carefully, concentrating particularly on learning the component parts of a corrosion cell and its interrelationships."

2018 AMPP, black and white, 75 pages, pdf

Available for download

Corrosion Condition Assessment Program For Marine Asset Management

Product Number: 51322-17750-SG

Author: Jeffrey S. West, Casey Jones, Stephen W. Foster

Publication Date: 2022

$20.00

This paper describes the development of a formal corrosion inspection and condition assessment program to support corrosion and asset management planning for maritime structures at Port Houston. A hierarchical, elemental-based inspection approach was developed using visual inspection criteria and prescribed measurements to characterize the condition of coatings and cathodic protection systems for above- and underwater elements in maritime structures.

Available for download

Corrosion Data Management Using 3D Visualisation and a Digital Twin

Product Number: 51320-14535-SG

Author: Robert Adey, Cristina Peratta, John Baynham

Publication Date: 2020

$20.00

There is a gap between the Integrity management systems used by companies to manage their assets and the needs of the CP engineer. Integrity management systems do not fully meet the needs of the engineer responsible for corrosion as they do not provide access and visualizations of all the data the engineer needs to make fast and informed decisions. There is also often no easy way to see the trends in the data, or easily access the relevant video and photographic data also recorded during the survey.

Data from surveys is normally contained in reports and EXCEL spreadsheets often with different measurement locations and inconsistent naming of the locations between reports. In this paper a system is introduced which enables engineers to manage and visualise in 3D CP survey data and provide access to all the relevant information through a 3D visual interface to any member of the teams. The software gives the engineer the ability to visualize in 3D the historical and predicted CP protection on the structure and the status of the anodes in the CP system. It also provides information on long term trends in the survey data.

By integrating the corrosion data with a simulation model a “digital twin” of the structure can be created to make predictions of the present and future protection of all parts of the structure. For example the engineer can easily use the software to systematically monitor the differences between the model predictions and survey data to identify anomalies and give early identification of problems which will require action.

The paper will describe the system developed and present applications of both the 3D corrosion data visualisation and the simulation based digital twin

Available for download

Corrosion Management Learnings For Atmospheric Storage Tanks

Product Number: 51322-17951-SG

Author: Gulnur Badalova, Mikael Johansson

Publication Date: 2022

$20.00

The terminal is subdivided for Oil, Gas and Produced Water plants. Each of these plants has number of storage tanks. The age of the tanks varies between 15-25 years. The products held within these tanks varies, from crude oil, condensate, produced water, potable water, to off spec oil and diesel fuel.

Most of the tanks within the facility have a similar CP arrangement and design. Each tank base is protected by an impressed current grid mesh anode buried in compacted, clean, sand backfill beneath the tank base and is powered by a transformer-rectifier placed outside the bund wall or within an electrical switch room. Permanent reference electrodes are installed beneath all tank bases to enable accurate potential measurements. Reference electrodes vary from Copper/Copper Sulphate, Silver/Silver Chloride to Zinc.

Available for download

Corrosion Protection Of API 5L Steel By Cold Spray Zinc Alloy Coatings In Simulated Natural Gas Pipeline Environments

Product Number: 51321-16977-SG

Author: Lucas Teeter; Margaret Ziomek-Moroz; Joseph Tylczak; Grant Crawford

Publication Date: 2021

$20.00

CP Fundamentals eCourse

Product Number: CP_Fund_All

$299.00

Walk into the cathodic protection classroom or field with a strong math, electricity, and chemistry foundation gained from this course. This course provides a thorough review of basic math, chemistry, and electrical fundamentals through step-by-step examples, self-study practice problems, and downloadable job-aids.

This 2-hour short course includes audio narration with transcripts and on-demand viewing and bookmarking capabilities that enable you to complete the course as your schedule allows.

Purchase of this course includes a one-year subscription and is non-refundable. Students will have access to all course materials for a period of one year from the date of registration. All course work must be completed during this time period. Extensions or transfers cannot be granted.

Available for download

CP of Steel in Soil: Temporospatial pH and Oxygen Variation as a Function of Soil Porosity

Product Number: 51321-16313-SG

Author: Federico Martinelli/Ueli Angst

Publication Date: 2021

$20.00

Available for download

CP Shielding and Pipeline Coatings

Product Number: 41206-285-SG

Author: Greg Ruschau

Publication Date: 2006

$20.00

Shielding of cathodic protection (CP) by pipeline coatings poses a serious threat to pipeline integrity. The difficulty in pipeline coating selection to avoid shielding is that the same properties that make a pipeline coating a good corrosion mitigation material can also lead to CP shielding. The key to proper coating selection is to select a coating that has the necessary properties to provide good corrosion protection but also one that, when disbondment and failure occurs, fails in such a way to allow effective cathodic protection.

Available for download

CP upgrade options for aboveground storage tanks

Product Number: MPWT19-14297

Author: Mohammed Alotaibi

Publication Date: 2019

$0.00

Storage tanks are the primary means for storing large volumes of liquids and gaseous products. Metal
loss from internal and external corrosion can reduce the service life of a tank. It is important to maintain
the integrity of steel storage tanks for safety, economic, and environmental reasons.
Saudi Aramco implemented three different scenarios of cathodic protection (CP) during bottom plate
replacement for three typical tanks. The tanks’ bottom plates were replaced based on thickness
measurements and visual inspection that revealed severe corrosion from soil. The main reason for
such corrosion was due to the asphalt layer underneath the tank. It was considered during the
replacement of the bottom plate to provide a reliable external (CP) and leak detection system. The
purpose of this paper is to demonstrate the experience gained from executing CP upgrades, and to
provide the best option to ensure integrity, cost saving and fewer shutdown periods.

Products tagged with 'cathodic protection'

Association for Materials Protection and Performance