AMPP Store - Products tagged with 'corrosion resistant alloy'

Available for download

51318-11450-EVALUATION OF THE STRESS CORROSION CRACKING OF DIFFERENT CRAS IN SOUR WELL ENVIRONMENT.

Product Number: 51318-11450-SG

Author: P.Esteban / Alejandra López / B.Calleja

Publication Date: 2018

$20.00

This paper shows the results of the stress corrosion cracking evaluation of two different austenitic corrosion resistant alloys (CRAs), N08028 and N08825 under different conditions of temperature and pressure of H2S and CO2.

Available for download

51318-11526-Development and characterization of electroless Ni-P-superparamagnetic Fe3O4 nanocomposite coatings

Product Number: 51318-11526-SG

Author: Chong Sun / Cahidoddin Fattahpour / Shuo Shuang / Mahidi Mahmoudi / Hongbo Zeng / Jing-Li Luo

Publication Date: 2018

$20.00

A high-phosphorus Ni-P coating was prepared by electroless deposition method. The characteristics and corrosion property of electroless Ni-P coating were investigated by surface analysis techniques and electrochemical measurements.

Avoiding Corrosion in Desalination Plants

Product Number: 37647-POD

ISBN: 978-1-57590-390-3

Author: Roger Francis

$147.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants explains how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to multistage flash (MSF), multiple-effect distillation (MED), and seawater reverse osmosis (SWRO) desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACE, 6 x 9" trim size, color, perfect bound, 214 pages

Available for download

Avoiding Corrosion in Desalination Plants

Product Number: 37647-pdf

ISBN: 978-1-57590-462-7

Author: Roger Francis

$147.00

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants explains how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to multistage flash (MSF), multiple-effect distillation (MED), and seawater reverse osmosis (SWRO) desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

Available for download

Avoiding Corrosion in Desalination Plants (e-book)

Product Number: 37647-e

ISBN: 978-1-57590-390-3

Author: Roger Francis

Publication Date: 2019

$147.00

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants tells the reader how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to MSF, MED, and SWRO desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACE e-book

Available for download

Corrosion & Mechanical Properties of Nickel Based Alloy 825 Explosion Welded Plates for H2S Service

Product Number: 51323-19123-SG

Author: O. Sarrat, H. Alves, J. Botinha, P. Maas

Publication Date: 2023

$20.00

The total project study focused on six suction and discharge drums. Each of them was built with twohemispherical heads and a number of shells. The H2S service and Stress Corrosion Cracking (SCC) from this specific oil and gas field required the equipment to be cladded with Alloy 825 to protect them from corrosion.

Available for download

Design Consideration for Internal Welding Attachments in Clad Pressure Vessels

Product Number: MPWT19-14326

Author: Olivier Sarrat

Publication Date: 2019

$0.00

Process equipment which employs a corrosion resistant alloy (CRA) layer cladded to steel is common in refineries, petrochemical plants and other plants processing highly corrosive media. There are two regularly employed methods for welding attachments and internals to clad process vessels. One is to remove the CRA cladding for welding the attachment to the steel base metal assuming dissimilar welds and restoring CRA by weld overlay. The other eliminates the step of removing the cladding, simplifying the attachment process by direct welding of the internals onto the clad layer. With the lack of data to prove the integrity of direct welding attachment onto the clad layer, designers frequently demand the cladding be removed or allow only a conservatively low stress limit for what can be attached directly to the clad surface. It is well understood that eliminating the step of removing clad increases the simplicity, improves the lead-time, and reduces the cost of making these attachments for trays or other internals, but there are concerns about clad disbonding risks. With the aim to provide data around the integrity of direct welding attachments for better risk assessments, a technical study was undertaken. In this study, it will be shown that the bond between clad material and the base steel is robust enough to withstand the heaviest attachments and harshest conditions. The theory behind the technical study will be presented along with the results of this study

Available for download

Effect of Carbon Dioxide and Hydrogen Sulfide on the Localized Corrosion Susceptibility of Corrosion

Product Number: 51317--8933-SG

ISBN: 8933 2017 CP

Author: Teresa Perez

Publication Date: 2017

$20.00

The purpose of this review is to discuss environmental effects, especially hydrogen sulfide and carbon dioxide on pitting susceptibility of low alloy steels and corrosion resistant alloys.

Available for download

Elemental Sulfur and Speciation in High Pressure High Temperatures Oil and Gas Well Environments: Their Role in Stress Corrosion Cracking of Corrosion Resistant Alloys

Product Number: 51317--9035-SG

ISBN: 9035 2017 CP

Author: Yuhchae Yoon

Publication Date: 2017

$20.00

This paper reviews both available stress corrosion cracking data and test methodologies involving additions of elemental sulfur using several procedures. It utilizes thermodynamic modeling to assess the chemical speciation of elemental sulfur under selected test conditions.

Available for download

Study on Effect of Buffer Capacity on Corrosion Performance of CRAs in Simulated Well Condition

Product Number: 51317--9283-SG

ISBN: 9283 2017 CP

Author: Masayuki Sagara

Publication Date: 2017

$20.00

Methodology to simulate actual oil and gas field condition in laboratory tests. A sulfide stress cracking test is carried out on 13% Cr stainless steel with various buffer solutions. Then, pH behavior was estimated. A suitable composition of the solution is proposed by using thermodynamic calculations.

Available for download

TM0198-HD1998-SG Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service-HD1998

Product Number: 21232-HD1998

ISBN: 1-57590-051-3

Author: NACE International

Publication Date: 1998

$179.00

This standard establishes a SSR test method for screening CRA materials (i.e., stainless steels and nickel-base alloys) for resistance to SCC at elevated temperatures in sour oilfield production environments. Historical Document 1998

Available for download

Using Digital Image Correlation to Improve Stress-Corrosion Cracking Evaluation by NACE TM0177-B

Product Number: 51317--8992-SG

ISBN: 8992 2017 CP

Author: Brandi Clark

Publication Date: 2017

$20.00

NACE TM0177 Method B is a standard method for evaluating stress-corrosion cracking resistance. Here, Digital Image Correlation determined strain distributions over the surface of bend samples made from corrosion-resistant alloys.

Products tagged with 'corrosion resistant alloy'

Association for Materials Protection and Performance