Menu
Search
Filters
Close
Menu

Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!

Practical Considerations for the Life Cycle Evaluation of Zinc Rich Coatings Galvanized Steel and Thermal Sprayed Metals for Industrial Structures in Moderate Environmental Exposures

Practical Considerations for the Life Cycle Evaluation of Zinc Rich Coatings Galvanized Steel and Thermal Sprayed Metals for Industrial Structures in Moderate Environmental Exposures
Available for download

This paper provides an objective review of the life cycle costs of zinc-rich coating systems used in moderate industrial exposure environments. The coating systems include conventional inorganic/organic coatings, galvanizing, and thermal sprayed metal coatings (metallizing). Service life and installation cost data from previous studies is used to calculate the life cycle costs over a specified design life of an industrial structure.

Product Number: 41207-339-SG
Author: Jayson L. Helsel
Publication Date: 2007
Industry: Coatings
$0.00
$20.00
$20.00

This paper provides an objective review of the life cycle costs of zinc-rich coating systems used in moderate industrial exposure environments. The coating systems include conventional inorganic/organic coatings, galvanizing, and thermal sprayed metal coatings (metallizing). Service life and installation cost data from previous studies is used to calculate the life cycle costs over a specified design life of an industrial structure. The life cycle costs are based on a suggested maintenance painting sequence that is outlined. A review of the costs for both shop and field coating application are discussed.

This paper provides an objective review of the life cycle costs of zinc-rich coating systems used in moderate industrial exposure environments. The coating systems include conventional inorganic/organic coatings, galvanizing, and thermal sprayed metal coatings (metallizing). Service life and installation cost data from previous studies is used to calculate the life cycle costs over a specified design life of an industrial structure. The life cycle costs are based on a suggested maintenance painting sequence that is outlined. A review of the costs for both shop and field coating application are discussed.

Product tags
Also Purchased
Process Approach in the Inspection of Plural Component Applied Coatings
Available for download

Process Approach in the Inspection of Plural Component Applied Coatings

Product Number: 41207-360-SG
Author: Mario A. Moreno
Publication Date: 2007
$20.00

Review of inspection and quality assurance of plural component sprayed protective coatings under the scope of simplified control theory. Review of process concepts and their application in the inspection of coatings and paints.
Protection of Concrete Floors in the Food and Beverage Industry
Available for download

Protection of Concrete Floors in the Food and Beverage Industry

Product Number: 41207-371-SG
Author: Jim  Ratliff
Publication Date: 2007
$20.00

While cementitious urethane technology for flooring applications has been around for quite some time now, the characteristics of these systems are not widely known by key decision makers within the food and beverage processing industry outside Europe. This presentation is intended to provide a generic and comparative analysis of cementitious urethane topping systems, as used in food and beverage processing facilities (with a particular emphasis on meat processing facilities), versus other widely used topping systems, including epoxy, polyester, vinyl ester, methylmethacrylate (MMA), polyurethane, polyurea, and tile technologies. 
Understanding Zinc Rich Primers & Importance of Performance Based Approach Single Coat vs 3 Coat Performance
Available for download

Understanding Zinc Rich Primers & Importance of Performance Based Approach Single Coat vs 3 Coat Performance

Product Number: 41210-574-SG
Author: Ilhan Ulkem, Mike Winter
Publication Date: 2010
$20.00

This paper summarizes the problems encountered by manufacturers and end-users relying on the available standards for materials and performance tests for zinc-rich coatings in today’s industry and presents some suggestions for improving them. The reasons and the need for developing new and only performance based specifications are also explained.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support