Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

51318-11303-NaCl and CaCl2-Induced High Temperature Corrosion of Automotive Exhaust Components

Picture for NaCl and CaCl2-Induced High Temperature Corrosion of Automotive Exhaust Components
Available for download

Investigating the high temperature corrosion behavior of ferritic stainless steel UNS S43940 by cyclic exposure tests (CETs) at 650°C, in presence of NaCl and CaCl2 containing salt deposits and with different O2 and H2O concentrations.

 

Product Number: 51318-11303-SG
Author: K. J. Vidic / G. Mori / M. Yasir / D. Knoll
Publication Date: 2018
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

The high temperature corrosion behavior of ferritic stainless steel UNS S43940 has been investigated by means of cyclic exposure tests (CETs) at 650°C, in presence of NaCl and CaCl2 containing salt deposits and in test gases with different O2 and H2O concentrations. CETs of steel sheets, coated with a salt layer and steel sheets, covered by a salt-contaminated glass fiber-insulation mat, have been performed. Tested salts were NaCl and CaCl2xH2O in different weight ratios. Steel specimen have been investigated gravimetrically, optically and by means of scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX). The oxides have been analyzed via X-ray diffraction (XRD), ion chromatography (IC), flame atomic absorption spectroscopy (FAAS) and UV/VIS spectroscopy.

Results show that in presence of NaCl, CaCl2 and oxygen, voluminous Fe2O3- and CaCrO4-containing oxide scales are formed. Highest mass loss was measured on salt-coated steel specimen, exposed to air + 0.05 % H2O. Steel sheets with the salt-contaminated mat showed significantly lower mass loss than those with the salt layer.

Key words:

UNS S43940, Automotive Exhaust System, NaCl- and CaCl2-Induced High Temperature Corrosion, Hot Alkali Metal- and Alkaline Earth Metal Chlorides

The high temperature corrosion behavior of ferritic stainless steel UNS S43940 has been investigated by means of cyclic exposure tests (CETs) at 650°C, in presence of NaCl and CaCl2 containing salt deposits and in test gases with different O2 and H2O concentrations. CETs of steel sheets, coated with a salt layer and steel sheets, covered by a salt-contaminated glass fiber-insulation mat, have been performed. Tested salts were NaCl and CaCl2xH2O in different weight ratios. Steel specimen have been investigated gravimetrically, optically and by means of scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX). The oxides have been analyzed via X-ray diffraction (XRD), ion chromatography (IC), flame atomic absorption spectroscopy (FAAS) and UV/VIS spectroscopy.

Results show that in presence of NaCl, CaCl2 and oxygen, voluminous Fe2O3- and CaCrO4-containing oxide scales are formed. Highest mass loss was measured on salt-coated steel specimen, exposed to air + 0.05 % H2O. Steel sheets with the salt-contaminated mat showed significantly lower mass loss than those with the salt layer.

Key words:

UNS S43940, Automotive Exhaust System, NaCl- and CaCl2-Induced High Temperature Corrosion, Hot Alkali Metal- and Alkaline Earth Metal Chlorides

Product tags
Also Purchased
Picture for Characterization of Direct Metal Laser Sintered Alloy 718 in the As-Fabricated and Heat Treated Condition
Available for download

51318-11297-Characterization of Direct Metal Laser Sintered Alloy 718 in the As-Fabricated and Heat Treated Condition

Product Number: 51318-11297-SG
Author: Robert Badrak / Arturo Delacruz / William Howie / Sergey Kolesov
Publication Date: 2018
$20.00

This paper focuses on characterizing Alloy 718 produced via the Direct Metal Laser Sintering (DMLS) process in the as-fabricated and heat treated condition.
Picture for Localized corrosion of alloys UNS N06690 and N06600 in steam generator lay-up conditions
Available for download

51318-11306-Localized corrosion of alloys UNS N06690 and N06600 in steam generator lay-up conditions

Product Number: 51318-11306-SG
Author: Héctor G. Maristany / Mariano A. Kappes / Martín A. Rodríguez / Martín A. Rodríguez
Publication Date: 2018
$20.00

Localized corrosion of solubilized and thermally aged alloys UNS N06690 and N06600, used in nuclear power plant steam generator tubing, was studied in simulated wet lay-up conditions.

 
Picture for Evaluating Polymer Based Materials Pipeline for Large Solids Particles Applications
Available for download

51318-11290-Evaluating Polymer Based Materials Pipeline for Large Solids Particles Applications

Product Number: 51318-11290-SG
Author: Kofi Freeman Adane / Aaron Fuhr / Ben Fotty
Publication Date: 2018
$20.00

Assessment was performed on the use of polymer-based materials or liners for large solids particle slurry applications. The study was conducted in a pilot-scale horizontal slurry flow loop using two different solids: sand and rocks.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support