Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!
Electrochemical test methods including open-circuit potential, electrochemical impedance spectroscopy, potentiodynamic polarization, and zero-resistance ammetry were used for corrosion investigation of UNS C69100 in a 3.5 wt.% sodium chloride aqueous solution, with optical and scanning electron microscopy.
Marine Corrosion Performance of Copper Alloy UNS C69100Mengyan Nie aJulian A. Wharton a and John Zbihlyj ba National Centre for Advanced Tribology at Southampton (nCATS) Engineering Sciences University of Southampton Southampton SO17 1BJ UK.b Tungum Limited 200A Ashchurch Business Centre Alexandra Way Tewkesbury GL20 8TD UKCorrespondence e-mail: m.nie@soton.ac.ukABSTRACTTungum alloy (UNS C69100) is an aluminium-nickel-silicon brass (chemical composition: 81-84% Cu 0.70-1.20 Al 0.8-1.40 Ni 0.80-1.30 Si with the remainder Zn) and is reported to have a good corrosion performance in marine environments (fully wetted splash zone and atmospheric conditions). In order to gain an in-depth understanding of the marine corrosion performance of this alloy electrochemical test methods including open-circuit potential electrochemical impedance spectroscopy potentiodynamic polarization and zero-resistance ammetry were used for corrosion investigation of UNS C69100 in a 3.5 wt.% sodium chloride aqueous testing solution in combination with optical microscopy and scanning electron microscopy. The corrosion properties of UNS C69100 obtained by electrochemical methods are also compared to six other alloys: UNS S31603 UNS S31254 UNS S32750 UNS N04400 UNS N08904 and UNS C36000. Galvanic coupling behaviour of UNS C69100 against these six alloys in a 3.5% NaCl solution for 30 days immersion are also reported in this paper.KEYWORDS: Tungum alloy marine corrosion galvanic corrosion electrochemical impedance spectroscopy zero-resistance ammetry UNS C69100.
Key words: UNS C69100 alloy, marine corrosion, galvanic corrosion, electrochemical impedance spectroscopy, zero-resistance ammetry
This paper is to study the corrosion performance of various Ni based alloys in high concentrations of HCl acids below the boiling point. Nickel-based alloys C-276 (UNS N10276), C-22 (UNS N06022), C-2000 (UNS N06200), Hybrid-BC1 (UNS N10362) and B-3 (UNS N10675) were investigated.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Use this error code for reference:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Crack growth rate (CGR) behavior of UNS N07718 was investigated as a function of K-rate in two different environments under cathodic potentials, a mild environment containing 3.5wt% NaCl and a more aggressive environment containing 0.5M H2SO4.
This paper discusses a study wherein the SSC resistance of 13Cr bar stock quenched and tempered to 22 HRC maximum hardness was tested and evaluated beyond the maximum H2S limit of 10 kPa (1.5 psi) established in NACE MR0175/ISO 15156-3 for use in sour service.