Menu
Search
Filters
Close
Menu

Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!

51312-01216-Evaluation of a CO2 corrosion prediction model in multiphase oil / gas production systems

Picture for Evaluation of a CO2 corrosion prediction model in multiphase oil / gas production systems
Available for download
Product Number: 51312-01216-SG
ISBN: 01216 2012 CP
Author: Kwei-Meng Yap
Publication Date: 2012
$0.00
$20.00
$20.00
The authors over the last fifteen years have been involved in developing and refining a corrosion prediction model for multiphase CO2 / H2S oil / gas production and transmission environments. This paper evaluates the accuracy and efficacy of the current version of the prediction model in light of published validation data and field case studies. Corrosion rates from multiple field measurements including oil / gas production wells and transmission lines were evaluated utilizing the prediction model which incorporates extensive experimental data from comprehensive Joint Industry Projects (JIP) integrated with data from literature and field experience. Corrosion rates obtained from the prediction model are compared with actual field data to assess and quantify model accuracy. The sensitivity of certain reported parameters such as water analysis dew point and gas saturation to predicted in-situ pH and corrosion rates is also discussed.
The authors over the last fifteen years have been involved in developing and refining a corrosion prediction model for multiphase CO2 / H2S oil / gas production and transmission environments. This paper evaluates the accuracy and efficacy of the current version of the prediction model in light of published validation data and field case studies. Corrosion rates from multiple field measurements including oil / gas production wells and transmission lines were evaluated utilizing the prediction model which incorporates extensive experimental data from comprehensive Joint Industry Projects (JIP) integrated with data from literature and field experience. Corrosion rates obtained from the prediction model are compared with actual field data to assess and quantify model accuracy. The sensitivity of certain reported parameters such as water analysis dew point and gas saturation to predicted in-situ pH and corrosion rates is also discussed.
Product tags
Also Purchased
Picture for Enhanced Corrosion Prediction Model for Multiphase Oil and Gas Production Systems
Available for download

Enhanced Corrosion Prediction Model for Multiphase Oil and Gas Production Systems

Product Number: 51317--9419-SG
ISBN: 9419 2017 CP
Author: Hui Li
Publication Date: 2017
$20.00

A top-of-line corrosion (TLC) model integrated into a CO2/H2S corrosion prediction model. The TLC model determines the top of the line corrosion rate of carbon steel based on water chemistry and film-wise condensation rate. The effect of various glycols, such as Monoethylene Glycol, Diethylene glycol and Triethylene Glycol, are included.
Picture for 03623 CO2 CORROSION PREDICTION BY USE OF
Available for download

03623 CO2 CORROSION PREDICTION BY USE OF THE NORSOK M-506 MODEL – GUIDELINES AND LIMITATIONS

Product Number: 51300-03623-SG
ISBN: 03623 2003 CP
Author: Stein Olsen
$20.00
Picture for 05551 CO2 Corrosion Prediction Model - Basic
Available for download

05551 CO2 Corrosion Prediction Model - Basic Principles

Product Number: 51300-05551-SG
ISBN: 05551 2005 CP
Author: Stein Olsen, Statoil ASA; Anne Marie Halvorsen, Norsk Hydro ASA; Per G. Lunde, Norsk Hydro Americas;
Publication Date: 2005
$20.00

The NORSOK M-506 is an empirical model based on experiments undertaken in a single phase water flow loop. The data is from experiments with low content of iron ions in the water phase, and the model is thus regarded to give a fair representation of the maximum corrosion rate in a CO2 corrosion controlled system.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support