Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Corrosion Testing Of Graphene-Oxide-Polymer Coatings For Geothermal Drilling Applications

Picture for Corrosion Testing Of Graphene-Oxide-Polymer Coatings For Geothermal Drilling Applications
Available for download

The high temperature and chemical composition of the geothermal fluid results in corrosion damage of drilling equipment, well casing and other components made of steel and iron alloys used in geothermal power production. This corrosive nature of the geothermal environment decreases the service life and increases the need for maintenance of geothermal power plants and geothermal wells. The main reasons for the corrosion of components are hydrogen sulfide (H2S) and carbon dioxide (CO2) present in geothermal system.

Product Number: 51322-17732-SG
Author: Erlend Oddvin Straume, Gifty Oppong Boakye, Baldur Geir Gunnarsson, Arna María Ormsdóttir, Beatriz Alonso Rodriguez, Sigrun Nanna Karlsdottir
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

The Geo-Drill project aims to save time, increase service life of equipment and instrumentation, and reduce costs during drilling of geothermal wells by improving drilling methods with new materials and novel design of a down-the-hole (DTH) drill hammer. In the project polymer coatings (PTFE/PPS) with added graphene oxide (GO) nano-particles were corrosion tested at high temperature and pressure to evaluate the corrosion resistance in simulated geothermal drilling environment. The results from the corrosion testing of the PTFE/PPS-GO coatings in simulated geothermal drilling environment at two different conditions that can be encountered during drilling operation are reported here. One set of samples with various GO content was tested in moderately alkaline water, pH = 9, at 120 °C and 50 bar for 14 days; simulating normal drilling conditions.A second set of samples were tested at harsh conditions at 250 °C, 50 bar for a duration of 7 days in water (vapor and liquid phases) with CO2 and H2S gasses added, which are conditions that can be encountered during geothermal well drilling if loss of circulation of the drilling fluid occurs with the subsequent ingress of corrosive gases into the well. To evaluate corrosion resistance, weight changes were measured, and microstructural and chemical composition analyses were performed with scanning electron microscope with an attached energy-dispersive X-ray spectroscopy equipment before and after testing.

The Geo-Drill project aims to save time, increase service life of equipment and instrumentation, and reduce costs during drilling of geothermal wells by improving drilling methods with new materials and novel design of a down-the-hole (DTH) drill hammer. In the project polymer coatings (PTFE/PPS) with added graphene oxide (GO) nano-particles were corrosion tested at high temperature and pressure to evaluate the corrosion resistance in simulated geothermal drilling environment. The results from the corrosion testing of the PTFE/PPS-GO coatings in simulated geothermal drilling environment at two different conditions that can be encountered during drilling operation are reported here. One set of samples with various GO content was tested in moderately alkaline water, pH = 9, at 120 °C and 50 bar for 14 days; simulating normal drilling conditions.A second set of samples were tested at harsh conditions at 250 °C, 50 bar for a duration of 7 days in water (vapor and liquid phases) with CO2 and H2S gasses added, which are conditions that can be encountered during geothermal well drilling if loss of circulation of the drilling fluid occurs with the subsequent ingress of corrosive gases into the well. To evaluate corrosion resistance, weight changes were measured, and microstructural and chemical composition analyses were performed with scanning electron microscope with an attached energy-dispersive X-ray spectroscopy equipment before and after testing.

Product tags
Also Purchased
Picture for Corrosion Under Insulation Performance Of Insulation Stand-Offs And Non-Metallic Membranes
Available for download

Corrosion Under Insulation Performance Of Insulation Stand-Offs And Non-Metallic Membranes

Product Number: 51322-17618-SG
Author: Ahmad Raza Khan Rana, Graham Brigham, Omar Chaar,George Jarjoura
Publication Date: 2022
$20.00

Corrosion under thermal insulations namely CUI (Corrosion under insulation) is among the key damage mechanisms which poses integrity risk to the hydrocarbon facilities. CUI is reportedly known as the reason behind 40-60% of failures in the facility piping whereas small bore piping (i.e., NPS < 4”) are even more sensitive to CUI failures, where up to 81% of reported failures in small-sized piping are known to be from CUI.  Monetary spending to inspect and fix CUI-related failures cost 10% of overall maintenance budget in a typical medium-sized oil refinery.  CUI risk is influenced by numerous operational and environmental factors which impedes its management in a typical AIM (Asset integrity management) program.
Picture for Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study
Available for download

Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study

Product Number: 51322-17751-SG
Author: Bernardo Cuervo, Mark McQueen
Publication Date: 2022
$20.00

External corrosion in uninsulated pipelines is normally able to be prevented by cathodic protection (CP). Generally, external corrosion on buried pipelines cannot occur if CP current is getting onto the pipe. CP is an electrochemical means of corrosion control in which the oxidation reaction in a galvanic cell is concentrated at the anode and suppresses corrosion of the cathode (pipe) in the same cell. For instance, to make a pipeline a cathode, an anode is attached to it.
Picture for Crevice Corrosion Of High-Grade Stainless Steels In Seawaters, Comparison Between Temperate And Tropical Locations
Available for download

Crevice Corrosion Of High-Grade Stainless Steels In Seawaters, Comparison Between Temperate And Tropical Locations

Product Number: 51322-17828-SG
Author: Nicolas Larché, Charles Leballeur, Dominique Thierry, Erwan Diler
Publication Date: 2022
$20.00

In natural seawater, microorganisms can fix, grow and develop on practically any surface, including stainless steels.The term biofilm is generally used for communities of microorganisms embedded in an organic polymer matrix (e.g. exopolysaccharides), produced by the microorganisms themselves) and adhering to a surface, irrespective of the environment in which they develop. Stainless steels are widely used for different applications in seawater such as the oil and gas, desalination and marine energy industries. The presence of a biofilm on passive alloys such as stainless steels or nickel-based alloys can strongly enhance the cathodic reactions, and shift their open-circuit potential (OCP) to the noble direction.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support