Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!
For engineers and maintenance personnel who design, operate, and maintain large, multi–stage wastewater treatment plants (WWTP) Basics of corrosion of metals and degradation of non–metals, including concrete, and how to mitigate them. 3rd edition 2016 NACE
This handbook educates engineers and maintenance personnel who design, operate, and maintain large, multi–stage wastewater treatment plants (WWTP) in municipal and industrial service, on the basics of corrosion of metals and degradation of non–metals, including concrete, and how to mitigate them.The authors' goal is to provide enough knowledge about the damage mechanisms affecting construction materials for the reader to design and cost–effectively maintain the different types of fixed equipment, including tanks, pressure vessels, basins, stacks, foundations, piping, structures, etc., in the WWTP and collection systems.2016 by NACE
This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.
This book presents new developments that have affected the commercial use of chemicals and devices to clean industrial equipment.
This second edition emphasizes the mechanisms of important cleaning processes and solvents and gives an overview of the science and technology of the formation and removal of fouling deposits in the industrial equipment environment.
It is directed to a general technically trained audience, with emphasis placed on the basic chemical and mechanical principles of industrial cleaning. All of the chapters have been updated and significant new information on the dissolution of inorganic solids is included.
2018 NACE, color, 8.5 x 11" trim size, perfect bound, 392 pages.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
This guide describes the use of reference photographs depicting the appearance of unpainted, painted, rusteed, and welded hot-rolled carbon steel prior to and after power- and hand-tool cleaning.
Each color photograph provides one possible illustration of the minimum acceptable level of cleanliness.
The photographs are intended to be used to supplement the written SSPC power- and hand-tool surface preparation standards.
This guide is in three languages: English, Spanish, and Portuguese.
This guide describes the use of reference photographs depicting the appearance of unpainted rusted carbon steel and painted carbon steel, with or without rust, prior to and after cleaining by waterjetting.
This guide, which consists of actual-size color photographs, can be used to clarifty the acceptable level of flash rusting allowed prior to the application of protective coatings.