AMPP Store - Conference Papers

Available for download

Development of Safety Monitoring and Remote Control System for Blasting Workers

Product Number: 41210-578-SG

Author: Won-Jun Yun, Byung Hun Lee, Dong-Min Kim, Young-Shick Ro

Publication Date: 2010

$20.00

Safety monitoring system for abrasive blast cleaning workers in the ship buildi ng industries has been developed in order to secure safety of the workers. The developed system is composed of three sub-systems; safety monitoring system, remote control system, and specialized communication system.

Available for download

Development of Self-Stratifying Systems as Sustainable Coatings

Product Number: 41213-729-SG

Author: J. Baghdachi, H. Perez, Punthip Talapatcharoenkit

Publication Date: 2013

$20.00

Certain coating applications including those used in aerospace, industrial maintenance, construction and transportation industries require a combination of primer/topcoat or basecoat/clearcoat layers. These multilayered systems require complex application and curing procedures. Multiple formulation, application and processing steps not only contribute to environmental waste generation and pollution they also use an excessive amount of energy until a solid film has been produced

Available for download

Development of Sucker Rods for Aggressive Environments

Product Number: 51317--8944-SG

ISBN: 8944 2017 CP

Author: Martin Buhler

Publication Date: 2017

$20.00

A Cr-Mo-B-Ti low alloyed steel, with a special quenched and tempered heat treatment, was designed. Corrosion fatigue resistance of the new material was evaluated at lab scale. Field tests are being carried out in 26 wells where sucker rods had failed for years.

Available for download

Development of Supercritical CO2 Spray Coating System for VOC Reduction

Product Number: 41214-859-SG

Author: Eun-Ha Song, Yun-Sig Lee, Dae-Young Kim, Che-Suk Lee, Chil-Suk Shin

Publication Date: 2014

$20.00

Available for download

Development Of Technique For In-Situ Measurement Of Oxide Film Thickness In High Pressure And High Temperature Environments

Product Number: 51322-18211-SG

Author: Florent Bocher, Jeffrey Boehme

Publication Date: 2022

$20.00

High pressure and high temperature processes are present in a wide variety of industries and are often pushing the limits of common materials. As a result, these applications have required advanced materials as well as an improved understanding of the in-situ conditions. Furthermore, those processes have become more and more present in a wide range of industries such as upstream oil and gas (O&G) and power generation (in supercritical CO₂ or molten salt nuclear reactors). The corrosion performance of existing and emerging materials to the extreme environments present in next generation power must be well characterized to ensure material integrity and reduce the risk of catastrophic failures due to environmentally assisted cracking, homogeneous corrosion, thermal oxidation, or other mechanisms.

Available for download

Development of Test Sites in Alaska to Study Atmospheric Corrosion Using Adjustable Test Racks

Product Number: 51324-21000-SG

Author: Raghu Srinivasan; Jozef Hunter

Publication Date: 2024

$40.00

In colder regions, heavy snowfall and pronounced freeze-thaw cycles introduce complexities to the established paradigms governing atmospheric corrosion. To elucidate the mechanisms of atmospheric corrosion under Arctic conditions, four distinct corrosion test sites were established in Alaska, each representing a unique corrosive environment. Each site was equipped with a modern, multi-angle corrosion exposure test rack coupled with an auxiliary weather station. Two additional multi-angle racks are introduced, offering enhanced flexibility and efficiency in research deployments. Innovation is in the design of modular corrosion test racks that can be adjusted to three different exposure angles. Within these setups, five different metal alloy specimens were exposed at three different angles and different lengths of time. Following exposure, the specimens underwent analysis to determine corrosion rates and weather parameter correlations.

Available for download

Development Of The Multipurpose High Strength Super Austenitic Stainless Steel UNS N08034 By Cold Working For Challenging Oilfield Environments

Product Number: 51322-17720-SG

Author: Julia Botinha, Helmuth Sarmiento Klapper, Clara Herrera, Merlin Seifert, Bodo Gehrmann, Helena Alves

Publication Date: 2022

$20.00

Wells in oil, gas and geothermal production experience a broad spectrum of operating conditions in terms of temperature, depth, pressure and production environments, which govern material selection. For severe environments, where high strength and toughness combined with excellent corrosion and cracking resistance are required, a new superaustenitic stainless steel has been recently developed. Aiming for a minimum yield strength of at least 120 ksi (827 MPa), strain hardening enables the desired mechanical properties, allowing users to avoid well known but HISC susceptible and less cost effective precipitation hardened (PH) nickel alloys.

Available for download

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part I – Field Observations And Metallurgical Factors

Product Number: 51322-17525-SG

Author: Eric C. Caldwell, Brent W.A Sherar, Peter F. Ellis II, Russell D. Kane

Publication Date: 2022

$20.00

This is Part I of a two-part series intended to provide background and a rational justification or supporting rationale for requirements leading to the development and publication of NACE⁽¹⁾ MR 0175 and ISO⁽²⁾ 15156. Part I focuses on some of the metallurgical and processing requirements; specifically, Rockwell C 22 scale (HRC) limit, the various acceptable heat treatments and the 1wt% Ni limit for carbon and low alloy steels to minimize the threat of sulfide stress cracking (SSC) in H₂S containing environments. Part II describes the testing and rationale behind the use of accelerated laboratory test procedures and their development to differentiate metallurgical behavior in sour environments.

Available for download

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part II – Accelerated Material Qualification Testing In Sour Environments At Near Atmospheric Pressure

Product Number: 51322-17516-SG

Author: Brent W.A. Sherar, Eric Caldwell, Peter F. Ellis II, Russell D. Kane

Publication Date: 2022

$20.00

This paper is Part II of a two-part series intended to narrate the history, some of which has been forgotten over time, leading up to the publication of the first Material Requirement (MR-01-75) standard prepared by NACE and its subsequent auxiliary standards. Previously, Part I¹ described the field observations and discussed the metallurgical factors that were being investigated by the historical NACE T-1B and 1F committees to support the development a “harmonized” sour service materials standard. In Part II, we focus on the rationale behind the use of accelerated laboratory test procedures and their development to differentiate metallurgical behavior in sour environments.

Available for download

Development& Implementation of Major Integrity Threat (Mit) Management to Prevent Major Accidents

Product Number: 51323-19478-SG

Author: Suryani, Frik Febby, Dita Wibawa, Uswatun Hasanah

Publication Date: 2023

$20.00

PT Pertamina Hulu Energi (PHE) is a subsidiary of PT Pertamina (PERSERO) – Indonesia’s national oil
and gas company, with coverage activities from exploration, development, operation, production and
distribution of oil and gas in Indonesia. PHE manages the portfolio and/or operations of 58 subsidiaries,
6 joint ventures and 2 affiliated companies that manage oil and gas blocks at home and abroad, as well
as engaged in downstream oil and gas business activities and services with oil and gas production of
540,000 BOPD and 2500 MMSCFD. Oil and gas operations handle hazardous material such as hydrocarbons that can easily form flammable mixture and some toxic.

Available for download

Developments In Abrasive Blast Nozzle Technology: Reducing Noise Exposure While Preserving Nozzle Performance And Usability

Product Number: 51322-18086-SG

Author: Matthew Sullivan, Christopher Sullivan

Publication Date: 2022

$20.00

Abrasive blasting operations used for paint and surface coatings removal are essential for the maintenance of the ships, aircraft, and land vehicles of the United States Armed Forces as well as use industries such as oil & gas, power generation, construction, mining, and infrastructure, among others. Abrasive blasting nozzle design is rudimentary and noise levels produced during abrasive blasting operations in shipyards, maintenance facilities, and factories for removing paint and surface coatings often exceed exposure limits put in place by Occupational Safety and Health Administration (OSHA). Reducing a worker's occupational noise exposure is imperative from a safety and economics perspective.

Available for download

Developments in Polyamide Rheology Modifiers for Very High Solids and 100% Solids Industrial, Protective and Marine Coatings

Product Number: 51220-267-SG

Author: Yannick Nabil-Moreau

Publication Date: 2020

$20.00

Formulators of these coatings need to address the legislations strongly pushing toward lower VOC content. All around the World, Governments, Paint Manufacturers and Applicators are still discussing viable options, though there is no doubt that challenges related to higher solids content in coating formulations will continue to increase.

Conference Papers

NACE Conference Papers

SSPC Conference Papers

AMPP Conference Papers

Online Conference Paper

Individual Conference Papers

Development of Safety Monitoring and Remote Control System for Blasting Workers

Development of Self-Stratifying Systems as Sustainable Coatings

Development of Sucker Rods for Aggressive Environments

Development of Supercritical CO2 Spray Coating System for VOC Reduction

Development Of Technique For In-Situ Measurement Of Oxide Film Thickness In High Pressure And High Temperature Environments

Development of Test Sites in Alaska to Study Atmospheric Corrosion Using Adjustable Test Racks

Development Of The Multipurpose High Strength Super Austenitic Stainless Steel UNS N08034 By Cold Working For Challenging Oilfield Environments

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part I – Field Observations And Metallurgical Factors

Development Of The NACE “MR-01-75” And NACE “TM-01-77” Standards: Part II – Accelerated Material Qualification Testing In Sour Environments At Near Atmospheric Pressure

Development& Implementation of Major Integrity Threat (Mit) Management to Prevent Major Accidents

Developments In Abrasive Blast Nozzle Technology: Reducing Noise Exposure While Preserving Nozzle Performance And Usability

Developments in Polyamide Rheology Modifiers for Very High Solids and 100% Solids Industrial, Protective and Marine Coatings

Association for Materials Protection and Performance