Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Coatings and Linings

View as
Sort by
Display per page
Picture for Developing and Managing a Coatings & Linings Program in an Electric Utility
Available for download

Developing and Managing a Coatings & Linings Program in an Electric Utility

Product Number: 51317--8812-SG
ISBN: 8812 2017 CP
Author: Steve Poncio
Publication Date: 2017
$20.00

To develop a Maintenance Coating Program encompassing cost justification for projects, pre-planning evaluation of safety and quality assurance programs. From two previous NACE Conference Papers.
Development and Implementation of a Novel Method to Remove Inorganic Zinc Coating from Low Alloy Steel
Available for download

Development and Implementation of a Novel Method to Remove Inorganic Zinc Coating from Low Alloy Steel

Product Number: 41215-913-SG
Author: Barry Messer, Yasir Idlibi, Sergio Vitomir
Publication Date: 2015
$20.00

Inorganic zinc (IOZ) silicate coating was previously applied to partially fabricated low alloy, 21/4 Cr-1MoV, high temperature, hydrogen, reactor vessels for long-term storage corrosion protection prior to final welding and post weld heat treatment (PWHT) at 690-720°C (1274-1328°F). The need for complete coating removal to mitigate the known embrittlement and weld cracking that can occur after welding and PWHT led to the development of a novel, environmentally friendly method to remove IOZ to trace levels below 1 ppm. 
Development of a Slurry Erosion Test standard of Industrial Maintenance Coatings
Available for download

Development of a Slurry Erosion Test standard of Industrial Maintenance Coatings

Product Number: 41215-936-SG
Author: David Tordonato, Bobbi Jo Merten, Allen Skaja
Publication Date: 2015
$20.00

Over the past several years, the Bureau of Reclamation’s Materials Engineering Research Laboratory has been developing and refining a test method to evaluate a coating’s resistance to erosion damage in sediment-laden immersion exposure. This test has initially been utilized as a screening/ranking method in selection of new coatings for the aforementioned severe service environments. 
Picture for Development Of Fes Scale Control Technology Using Polymeric Dispersants In Sour Environment
Available for download

Development Of Fes Scale Control Technology Using Polymeric Dispersants In Sour Environment

Product Number: 51322-17630-SG
Author: Saebom Ko, Zhaoyi Dai, Xin Wang, Amy T. Kan, Wei Lee, Mason B. Tomson
Publication Date: 2022
$20.00

Mineral scales frequently occur in tanks, pipelines, cooling and heating system, production wells of
oil and gas, external and internal membrane, and other equipment during industrial processes,
causing the reduction of process efficacy and millions of dollars on dealing with the scale issues. As
oil and gas are produced increasingly in more unconventional reservoirs, such as deeper and tighter
zones, with new technologies, more challenges are encountered to mitigate scale problems.
Picture for Development Of High Velocity Oxygen Fuel (HVOF) Corrosion Resistant Coatings; A Comparison Between Novel High Entropy Alloy (HEA) And Conventional Cermet Coatings For Geothermal Applications
Available for download

Development Of High Velocity Oxygen Fuel (HVOF) Corrosion Resistant Coatings; A Comparison Between Novel High Entropy Alloy (HEA) And Conventional Cermet Coatings For Geothermal Applications

Product Number: 51322-17675-SG
Author: Gifty Oppong Boakye, Baldur Geir Gunnarsson, Erlend Oddvin Straume, Feifei Zhang, Arna María Ormsdóttir, Sigrún Nanna Karlsdóttir
Publication Date: 2022
$20.00

Several components in geothermal power plants need to be protected from the environment due to the corrosive nature of geothermal fluids used to generate the energy. Depending on the fluid properties for any location, the type of protection varies. In geothermal power plants, wear, erosion, corrosion, and scaling are all known problems1. These issues can lead to a variety of outcomes, ranging from decreased plant efficiency to upstream component failure. Failure of a component is thus a significant challenge in the geothermal industry, where materials need to operate in high temperature and high pressure environments. A major cost factor is also linked to the drilling of geothermal wells, where cost rises due to increased depth/distance of drilling, increased trip times, higher high temperature and high-pressure conditions which can lead to increased wear and corrosion of the materials. To address the issue, coatings can be considered to be a potential solution to extend the service life of downhole equipment.
Picture for Development of Iron Sulfide Scale Inhibitor For Ultra-Tight Sandstone
Available for download

Development of Iron Sulfide Scale Inhibitor For Ultra-Tight Sandstone

Product Number: 51322-17896-SG
Author: Cyril Okocha, Tao Chen, Alex Thornton, Qiwei Wang
Publication Date: 2022
$20.00

Oilfield sulfide scale formation is peculiar to sour production scenarios, and for many oil and gas fields the issue of iron sulfide scale management downhole presents a major challenge. Historically iron sulfide scaling downwell have featured ‘reactive’ chemical dissolver interventions to recover well production once sulfide scale has deposited, and operators have published extensively on their experiences i.e. coiled tubing deployed dissolver technologies used in well clean-out treatments (Green, et.al. 2014, Wang et.al. 2017, Wang et.al. 2018, Buali et. al 2014).
Development of Linings for High Temperature, High Pressure Applications for Petrochemical Applications
Available for download

Development of Linings for High Temperature, High Pressure Applications for Petrochemical Applications

Product Number: 41214-838-SG
Author: Al Morris
Publication Date: 2014
$20.00

Development of linings for high temperature, high-pressure applications present a number of special challenges. Challenges include chemical resistance, abrasion resistance, adhesion under cycling temperature and pressure conditions, flexibility, application properties, as well as resistance to pressure and temperature. 
Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation
Available for download

Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation

Product Number: 41216-977-SG
Author: Robert Kogler, Laura Erickson
Publication Date: 2016
$20.00

Protective coating systems provide the primary corrosion protection for assets in sea water. Protective coating systems are defined as a specific combination of surface preparation and coating material applied under specified conditions to a specific structure. Over the past many years, the paint industry has focused considerable resources toward the formulation, performance testing and fine tuning of coatings materials. 
Picture for Development Of Multilayer Coating Systems For Self-Healing Protection And Corrosion Mitigation In The Atmospheric Zone Of Offshore Wind Turbines.
Available for download

Development Of Multilayer Coating Systems For Self-Healing Protection And Corrosion Mitigation In The Atmospheric Zone Of Offshore Wind Turbines.

Product Number: 51322-17691-SG
Author: Adamantini Loukodimou, Dimitrios Statharas, David Weston, Shiladitya Paul
Publication Date: 2022
$20.00

Offshore metallic structures have an average life-time of 20-25 years. They consist of four different zones, the buried, the submerged, the tidal/splash and the atmospheric one. According to NACE 2013 the global corrosion cost is estimated to be US$2.5 trillion, consisting a major economic problem. Hence, protection from corrosion is essential. Each zone is protected either with cathodic methods, or with a combination of cathodic methods and coatings. More specifically, the protection of the atmospheric zone, which is the aim of this research, due to the lack of continuous electrolyte (seawater) does not allow the application of cathodic protection.
Picture for Development of Self-Stratifying Systems as Sustainable Coatings
Available for download

Development of Self-Stratifying Systems as Sustainable Coatings

Product Number: 41213-729-SG
Author: J. Baghdachi, H. Perez, Punthip Talapatcharoenkit
Publication Date: 2013
$20.00

Certain coating applications including those used in aerospace, industrial maintenance, construction and transportation industries require a combination of primer/topcoat or basecoat/clearcoat layers. These multilayered systems require complex application and curing procedures. Multiple formulation, application and processing steps not only contribute to environmental waste generation and pollution they also use an excessive amount of energy until a solid film has been produced
Development of Supercritical CO2 Spray Coating System for VOC Reduction
Available for download

Development of Supercritical CO2 Spray Coating System for VOC Reduction

Product Number: 41214-859-SG
Author: Eun-Ha Song, Yun-Sig Lee, Dae-Young Kim, Che-Suk Lee, Chil-Suk Shin
Publication Date: 2014
$20.00
Development of Technique for In-Situ Measurement of Oxide Film Thickness in High Pressure and High Temperature Environments
Available for download

Development Of Technique For In-Situ Measurement Of Oxide Film Thickness In High Pressure And High Temperature Environments

Product Number: 51322-18211-SG
Author: Florent Bocher, Jeffrey Boehme
Publication Date: 2022
$20.00

High pressure and high temperature processes are present in a wide variety of industries and are often pushing the limits of common materials. As a result, these applications have required advanced materials as well as an improved understanding of the in-situ conditions. Furthermore, those processes have become more and more present in a wide range of industries such as upstream oil and gas (O&G) and power generation (in supercritical CO2 or molten salt nuclear reactors). The corrosion performance of existing and emerging materials to the extreme environments present in next generation power must be well characterized to ensure material integrity and reduce the risk of catastrophic failures due to environmentally assisted cracking, homogeneous corrosion, thermal oxidation, or other mechanisms. 
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support