Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Aesthetic Issues With Spray-Applied Fluoropolymer Coating System

Aesthetic Issues With Spray-Applied Fluoropolymer Coating System
Available for download

A building, partially clad in fluoropolymer coated aluminum panels, was observed to have an aesthetically unacceptable appearance while still under construction. Once installed on the building, many of the panels exhibited a vertical streaked appearance under certain conditions. When the panels were at ground level, or when the sun was bright, the streaky appearance was not noticeable. However, in conditions of low light, such as during early morning, dusk, or on cloudy days the streaky appearance was reported to become apparent. A visual mock-up, consisting of multiple coated panels that had been approved by the architect as a guide to the anticipated appearance were also present on-site as a reference. This visual mock-up was used as a reference for acceptable appearance of the coated panels.  

Product Number: 51322-17971-SG
Author: Kimberly Steiner
Publication Date: 2022
Industry: Coatings
$0.00
$20.00
$20.00

A large building in a municipal area of the coastal United States was partially clad with aluminum panels. Due to the exterior and coastal service environment, the panels were coated with an AAMA(1) 2605-compliant fluoropolymer-based coating system. However, after installation of some of the panels, the contractor noticed an unacceptable “streaked” appearance, particularly under post-dawn and predusk low-light conditions. 

An investigation was undertaken to document and understand the nature of the streaked appearance. The investigation consisted of the following: 1) on-site measurement of color, gloss, and coating system thickness along the length of installed panels, 2) comparative measurements on accepted visual on-site mock-up panels, 3) observations of coating application and quality control processes at the coating applicator’s facility, and 4) laboratory analysis of the coating system color, gloss, thickness, distribution, composition as well as an evaluation of the underlying substrate. The investigation found issues with primer application that may affect long-term performance, and inconsistencies in application of the topcoat that led to the unacceptable appearance.  

A large building in a municipal area of the coastal United States was partially clad with aluminum panels. Due to the exterior and coastal service environment, the panels were coated with an AAMA(1) 2605-compliant fluoropolymer-based coating system. However, after installation of some of the panels, the contractor noticed an unacceptable “streaked” appearance, particularly under post-dawn and predusk low-light conditions. 

An investigation was undertaken to document and understand the nature of the streaked appearance. The investigation consisted of the following: 1) on-site measurement of color, gloss, and coating system thickness along the length of installed panels, 2) comparative measurements on accepted visual on-site mock-up panels, 3) observations of coating application and quality control processes at the coating applicator’s facility, and 4) laboratory analysis of the coating system color, gloss, thickness, distribution, composition as well as an evaluation of the underlying substrate. The investigation found issues with primer application that may affect long-term performance, and inconsistencies in application of the topcoat that led to the unacceptable appearance.  

Product tags
Also Purchased
An innovative thermoplastic coating for CUI applications
Available for download

An Innovative Thermoplastic Coating For CUI Applications

Product Number: 51322-18122-SG
Author: Hindrik Harm Broesder, Somaieh Salehpour, Dinko Cudic
Publication Date: 2022
$20.00

An innovative thermoplastic type of coating material based on pure isobutene homopolymer was investigated to determine whether it would be fit for purpose in CUI services at low and moderate temperatures up to 120 °C. This polymer is commonly called Polyisobutene (PIB) and has a unique set of properties that are beneficial for protecting metallic structures from corrosion. Polyisobutene is a polyolefin with a chemical structure similar to Polyethylene (PE) and Polypropylene (PP). One of the major differences is that PE and PP are solid materials with a high degree of crystallinity, whereas PIB does not have a crystallization or melting temperature. PIB has a glass transition temperature (Tg) below – 60 °C which indicates that the polymer is a liquid above this temperature.
Picture for Arc Sprayed Zinc Metalizing For Cathodic Protection Of Reinforced Concrete Structures
Available for download

Arc Sprayed Zinc Metalizing For Cathodic Protection Of Reinforced Concrete Structures

Product Number: 51322-17571-SG
Author: David Whitmore, Travis Marmon, Haixue Liao
Publication Date: 2022
$20.00

Corrosion of reinforcing steel is the most significant cause of deterioration of reinforced concrete structures. Exposure to de-icing salts, seawater and chloride-containing set accelerators can play a significant role in reinforcing steel corrosion. Long-term exposure to carbon dioxide is also cited as a contributor to the corrosion of steel in concrete as well.
Picture for Applying Machine Learning Techniques To Identify And Predict Behavior Of Rectifier And Groundbed State Change
Available for download

Applying Machine Learning Techniques To Identify And Predict Behavior Of Rectifier And Groundbed State Change

Product Number: 51322-17833-SG
Author: Matt Barrett, Will Maize, Tony da Costa
Publication Date: 2022
$20.00

Impressed current rectifiers are the backbone of a pipeline operator’s cathodic protection (CP) systems. A rectifier’s ability to protect a large length of electrically continuous pipeline considerably improves efficiencies and reduces material costs as compared to galvanic systems. However, like galvanic anodes, impressed current anodes are a consumable asset, and require replacement at the end of their service life to ensure that the rectifier can continue to adequately protect the pipeline.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support