Menu
Search
Filters
Close
Menu

Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!

99620 EFFECT OF SULFITE IONS IN N2 AND CO2 PURGED 0.5 M NACL SOLUTION ON STAINLESS STEELS EXAMINED BY DIFFERENT ELECTROCHEMICAL TECHNIQUES AND BY REFLECTANCE MEASUREMENTS

Picture for 99620 EFFECT OF SULFITE IONS IN N2 AND CO2
Available for download
Product Number: 51300-99620-SG
ISBN: 99620 1999 CP
Author: T.Hemmingsen, N. O.Aagotnes, T. Kroeger-Silseth, N. Kolak and M. Kaik
Industries: Chemical Inhibitors , Oil and Gas Production
$0.00
$20.00
$20.00
Three steels, 13% Cr-steel, SS 304 steel and duplex steel are examined for corrosion for 48-hours periods in N2 or CO2 purged 0.5 M sodium chloride electrolytes with different sulfite concentrations. The results show that 13% Cr-steel is most susceptible to pitting in the presence of sulfite both under N2 and CO2 atmospheres. SS 304 steel was more resistant to corrosion than 13% Crsteel. Duplex steel showed rather good corrosion resistance under these conditions. The corrosion rate, inclusive pitting corrosion, after 24 hours in presence of 0-10 mM sulfite based on LPR-measurements is for duplex steel 0.5 – 0.9 mm/year under N2 and 0.1 - 1.8 mm/year under CO2, for SS 304 steel 1.0 – 1.8 mm/year under N2 and 0.6- 1.4 mm/year under CO2, and for 13% Cr-steel 1.3 – 2.2 mm/year under N2 and 0.7- 1.8 mm/year under CO2. The use of AC-impedance measurements is discussed. The method should be used with care when other mechanisms than general corrosion are involved.
Three steels, 13% Cr-steel, SS 304 steel and duplex steel are examined for corrosion for 48-hours periods in N2 or CO2 purged 0.5 M sodium chloride electrolytes with different sulfite concentrations. The results show that 13% Cr-steel is most susceptible to pitting in the presence of sulfite both under N2 and CO2 atmospheres. SS 304 steel was more resistant to corrosion than 13% Crsteel. Duplex steel showed rather good corrosion resistance under these conditions. The corrosion rate, inclusive pitting corrosion, after 24 hours in presence of 0-10 mM sulfite based on LPR-measurements is for duplex steel 0.5 – 0.9 mm/year under N2 and 0.1 - 1.8 mm/year under CO2, for SS 304 steel 1.0 – 1.8 mm/year under N2 and 0.6- 1.4 mm/year under CO2, and for 13% Cr-steel 1.3 – 2.2 mm/year under N2 and 0.7- 1.8 mm/year under CO2. The use of AC-impedance measurements is discussed. The method should be used with care when other mechanisms than general corrosion are involved.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 99589 EFFECT OF MATERIAL COMPOSITION, TEMPERATURE
Available for download

99589 EFFECT OF MATERIAL COMPOSITION, TEMPERATURE AND POTENTIALS ON CREVICE CORROSION OF LC MARTENSITIC 13% CR STEELS IN WELD SIMULATED AND COLD DEFORMED CONDITIONS

Product Number: 51300-99589-SG
ISBN: 99589 1999 CP
Author: Hans Hoffmeister
$20.00
Picture for 99612 THE OVER 20 YEAR OPERATING EXPERIENCE
Available for download

99612 THE OVER 20 YEAR OPERATING EXPERIENCE WITH CARBON STEEL TUBINGS AT ABU ATTIFEL FIELD. PROBLEMS AND SOLUTIONS

Product Number: 51300-99612-SG
ISBN: 99612 1999 CP
Author: Tiziana Cheldi, K. Rumash, Bruno Bazzoni
$20.00
Picture for 99592 CORROSION BEHAVIOR OF CRA’S IN HIGH
Available for download

99592 CORROSION BEHAVIOR OF CRA’S IN HIGH DENSITY PACKER FLUIDS AT HIGH TEMPERATURE

Product Number: 51300-99592-SG
ISBN: 99592 1999 CP
Author: L. Scoppio, M. Barteri, T. Cheldi, M. Ke, S. Massi
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support