Menu
Search
Filters
Close
Menu

01007 PERFORMANCE OF CORROSION INHIBITORS FOR ACIDIZING JOBS IN HORIZONTAL WELLS COMPLETED WITH CRA LABORATORY TESTS

Picture for 01007 PERFORMANCE OF CORROSION INHIBITORS
Available for download
Product Number: 51300-01007-SG
ISBN: 01007 2001 CP
Author: Carlos Jose Bandeira de Mello Joia, Rosane Fernandes Brito, Benicio Claudino Barbosa, Flavio Dias de
$0.00
$20.00
$20.00
The search for oil has driven companies to explore and produce reservoirs located in deep waters. Sometimes these reservoirs produce corrosive fluids that lead to the use of expensive alloys. The high production costs sometimes can be minimized with the use of Extended Reach Wells (ERW), horizontal wells and the proper selection of corrosion resistant alloys (CRA). Horizontal wells have been used to allow higher production rates. CRA's are used either because it is absolutely necessary due to the corrosive environment or just to guarantee a longer time between work-over if the production fluids show moderate or even low corrosiveness. The economics of these expensive wells require high production rates. Therefore, acid jobs are often applied to remove reservoir damages produced during drilling or completion operations. Acid jobs are very aggressive to the tubing and down-hole equipment, so corrosion inhibitors are always used. This paper describes laboratory tests performed to verify the effectiveness of some corrosion inhibitors suggested for use with mud-acids to be injected in horizontal wells equipped with CRA tubing. For the conditions tested, no corrosion inhibitor showed acceptable performance for all materials tested if HC1 was used as the base for the mud-acid generation. Better results, however, were observed if the corrosion inhibitors were used to mitigate corrosion of mud-acids that were produced from organic acids. KEYWORDS: corrosion, inhibitors, acidizing, horizontal wells, corrosion resistant alloys, mud acid, HC1, HF.
The search for oil has driven companies to explore and produce reservoirs located in deep waters. Sometimes these reservoirs produce corrosive fluids that lead to the use of expensive alloys. The high production costs sometimes can be minimized with the use of Extended Reach Wells (ERW), horizontal wells and the proper selection of corrosion resistant alloys (CRA). Horizontal wells have been used to allow higher production rates. CRA's are used either because it is absolutely necessary due to the corrosive environment or just to guarantee a longer time between work-over if the production fluids show moderate or even low corrosiveness. The economics of these expensive wells require high production rates. Therefore, acid jobs are often applied to remove reservoir damages produced during drilling or completion operations. Acid jobs are very aggressive to the tubing and down-hole equipment, so corrosion inhibitors are always used. This paper describes laboratory tests performed to verify the effectiveness of some corrosion inhibitors suggested for use with mud-acids to be injected in horizontal wells equipped with CRA tubing. For the conditions tested, no corrosion inhibitor showed acceptable performance for all materials tested if HC1 was used as the base for the mud-acid generation. Better results, however, were observed if the corrosion inhibitors were used to mitigate corrosion of mud-acids that were produced from organic acids. KEYWORDS: corrosion, inhibitors, acidizing, horizontal wells, corrosion resistant alloys, mud acid, HC1, HF.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 01005 ESTABLISHMENT OF CORROSION INHIBITOR
Available for download

01005 ESTABLISHMENT OF CORROSION INHIBITOR PERFORMANCE IN DEEPWATER CONDITIONS

Product Number: 51300-01005-SG
ISBN: 01005 2001 CP
Author: L.A. Skogsberg, B.P. Miglin, S. Ramachandran and K.A. Bartrip
$20.00
Picture for Corrosion Testing of Stimulation Acidizing Packages on High Strength Corrosion Resistant Tubing Allo
Available for download

51314-3945-Corrosion Testing of Stimulation Acidizing Packages on High Strength Corrosion Resistant Tubing Alloys for High Pressure Deep Water Wells

Product Number: 51314-3945-SG
ISBN: 3945 2014 CP
Author: Lucrezia Scoppio
Publication Date: 2014
$0.00
Picture for 01004 H2S RESISTANT MATERIALS FOR OIL&GAS
Available for download

01004 H2S RESISTANT MATERIALS FOR OIL&GAS PRODUCTION

Product Number: 51300-01004-SG
ISBN: 01004 2001 CP
Author: J. Klower, H. Schlerkmann, and R. Popperling
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support