Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Understanding Effective Corrosion Inhibitor Performance For Oil Pipeline Transport Using Innovative Residual Analysis Techniques

Picture for Understanding Effective Corrosion Inhibitor Performance For Oil Pipeline Transport Using Innovative Residual Analysis Techniques
Available for download
Product Number: 51321-16752-SG
Author: Peng Jin; Shujun Gao; Sankaran Murugesan; Sunder Ramachandran; Zhengwei Liu; Tracey Jackson; Lei Huang
Publication Date: 2021
$0.00
$20.00
$20.00

Corrosion inhibitor (CI) residual measurements have been a decades-long source of frustration for chemical vendors and oilfield operators alike. These measurements are often expected to detect small amounts of CI in a complex matrix of interfering species. The authors have developed a new technique utilizing nanomaterials coupled with surface-enhanced Raman spectroscopy (SERS). This new SERS technique is capable of accurately and precisely detecting trace amounts of several corrosion inhibitors at sub ppm levels. A robust field protocol was developed for sample collection, sample preparation, and calibration to allow reliable field analysis.
In oil transport pipeline systems it is operationally important that small concentrations of CI are transported through the oil to the areas where low amounts of water may be present in the system. The residual technique discussed in this paper has shown that one CI is transported in sufficient quantity to the areas where low amounts of water are collected. The new SERS technique is allowing operators to know with a high degree of certainty that the products selected for their pipelines are correct and effective. This residual technique in conjunction with corrosion monitoring empowers the operator to select a better performing product for a longer pipeline service life or to optimize the cost of treatment of their pipeline while still maintaining an optimal service life.

Corrosion inhibitor (CI) residual measurements have been a decades-long source of frustration for chemical vendors and oilfield operators alike. These measurements are often expected to detect small amounts of CI in a complex matrix of interfering species. The authors have developed a new technique utilizing nanomaterials coupled with surface-enhanced Raman spectroscopy (SERS). This new SERS technique is capable of accurately and precisely detecting trace amounts of several corrosion inhibitors at sub ppm levels. A robust field protocol was developed for sample collection, sample preparation, and calibration to allow reliable field analysis.
In oil transport pipeline systems it is operationally important that small concentrations of CI are transported through the oil to the areas where low amounts of water may be present in the system. The residual technique discussed in this paper has shown that one CI is transported in sufficient quantity to the areas where low amounts of water are collected. The new SERS technique is allowing operators to know with a high degree of certainty that the products selected for their pipelines are correct and effective. This residual technique in conjunction with corrosion monitoring empowers the operator to select a better performing product for a longer pipeline service life or to optimize the cost of treatment of their pipeline while still maintaining an optimal service life.

Product tags
Also Purchased
Picture for 02288 EVALUATION OF INHIBITOR PERFORMANCE...
Available for download

02288 EVALUATION OF INHIBITOR PERFORMANCE FOR PROTECTION AGAINST LOCALIZED CORROSION

Product Number: 51300-02288-SG
ISBN: 02288 2002 CP
Author: J. Marsh, J. W. Palmer and R. C. Newman
Publication Date: 2002
$20.00

 A novel evaluation technique, based on an artificial pit electrode, has been developed for inhibitor studies. The first example is of three generic inhibitors, against localised corrosion. The second is of three industrial inhibitors against existing localised corrosion on a north sea production platform
Picture for 00034 THE CORROSION INHIBITOR AVAILABILITY MODEL
Available for download

00034 THE CORROSION INHIBITOR AVAILABILITY MODEL

Product Number: 51300-00034-SG
ISBN: 00034 2000 CP
Author: Bill Hedges, Dominic Paisley, and Richard Woollam
$20.00
Picture for 04373 Pitfalls in Monitoring Sweet Corrosion
Available for download

04373 Pitfalls in Monitoring Sweet Corrosion Inhibition Using Residual Analysis Techniques

Product Number: 51300-04373-SG
ISBN: 04373 2004 CP
Author: Adelina J. Son, Champion Technologies Inc.
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support