Menu
Search
Filters
Close
Menu

Testing Adhesion of Coatings on Concrete Using ASTM D7234

Testing Adhesion of Coatings on Concrete Using ASTM D7234
Available for download

ASTM D7234 was first published in 2005, and updated in 2012 with precision statistics. This paper will go into the history of the development of the test method, the procedure and interpretation details that are critical to using and applying this standard along with a discussion of the factors that affect the precision of this method.

Product Number: 41215-895-SG
Author: Frederick Gelfant
Publication Date: 2015
Industries: Coatings , Coatings and Linings
$0.00
$20.00
$20.00

ASTM D7234 was first published in 2005, and updated in 2012 with precision statistics. This paper will go into the history of the development of the test method, the procedure and interpretation details that are critical to using and applying this standard along with a discussion of the factors that affect the precision of this method.

ASTM D7234 was first published in 2005, and updated in 2012 with precision statistics. This paper will go into the history of the development of the test method, the procedure and interpretation details that are critical to using and applying this standard along with a discussion of the factors that affect the precision of this method.

Product tags
Also Purchased
Pull-Off Adhesion Testing of Coatings - Improve Your Technique
Available for download

Pull-Off Adhesion Testing of Coatings - Improve Your Technique

Product Number: 41215-893-SG
Author: JF Fletcher, DJ Barnes
Publication Date: 2015
$20.00

Pull-off adhesion testing is widely used to assess the protective coating process. It is also used to determine if a coating is fit for service in new construction and for repairs to existing structures. The result is often critical to the acceptance or rejection of a coating process, as the adhesion value quoted by the paint manufacturer can be adversely affected by aspects of the coating process. Low adhesion values are indicative of premature failure of the coating and are often due to inadequate surface preparation of the substrate. 
Picture for Coatings + Proceedings 2021-ALL Papers

(Concrete) Relevant Testing When Coating Concrete Tanks and Structure

Product Number: 37-COAT_DEC21
Author: John Sierzega
Publication Date: 2021
$20.00

Inspection has always been a hot topic when it comes to coatings projects. There are some substrates that can be harder to specify due to not knowing without knowing which testing is relevant to specify and properly inspect the substrate and surface after it is coated. Concrete is probably the number one substrate that is confusing. This paper will dive into the testing that is relevant when specifying coatings for concrete tanks and structures. Whether it is how to properly check film build or whether or not an ASTM test is relevant, this paper will clear the waters and make specifying coatings for concrete tanks and structures easier.
Replica Tape- Relating 3 Surface Profile Parameters to Pull-Off Adhesion
Available for download

Replica Tape- Relating 3 Surface Profile Parameters to Pull-Off Adhesion

Product Number: 41215-878-SG
Author: David Beamish
Publication Date: 2015
$20.00

Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings. The resultant surface profile must be accurately assessed to ensure compliance with job or contract specifications. But is profile height alone (the most commonly measured parameter) a good indicator of long-term coating performance? 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support