Menu
Search
Filters
Close
Menu

SSPC-PA 1-2024, Shop, Field, and Maintenance Coating of Metals

Picture for SSPC-PA 1-2024, Shop, Field, and Maintenance Coating of Metals
Available for download

This standard provides basic requirements for best practices for the application of industrial/marine protective coatings to coated or uncoated metallic substrates and is intended for use by both specifiers and contractors, either in its entirety or by referencing specific sections. It focuses on the coating application process and application-related items that are included as one element of the contractor’s work plan or process control procedures.

Product Number: SSPC-PA 1-2024
Industries: Coatings and Linings , Coatings
$109.00
$109.00
$109.00

Or

This standard provides basic requirements for best practices for the application of industrial/marine protective coatings to coated or uncoated metallic substrates and is intended for use by both specifiers and contractors, either in its entirety or by referencing specific sections. It focuses on the coating application process and application-related items that are included as one element of the contractor’s work plan or process control procedures.

Keywords: coatings, field coating, application

This standard provides basic requirements for best practices for the application of industrial/marine protective coatings to coated or uncoated metallic substrates and is intended for use by both specifiers and contractors, either in its entirety or by referencing specific sections. It focuses on the coating application process and application-related items that are included as one element of the contractor’s work plan or process control procedures.

Keywords: coatings, field coating, application

Product tags
Also Purchased
Picture for SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning
Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024
Publication Date: 2024
$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a)           to remove material from the surface that can cause early failure of the coating, and

b)           to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

 

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

 

Degree of Surface Cleanliness

Designation

White Metal Blast Cleaning

SSPC-SP5/NACE No. 1

Near-White Metal Blast Cleaning

SSPC-SP10/NACE No. 2

Commercial Blast Cleaning

SSPC-SP6/NACE No. 3

Industrial Blast Cleaning

SSPC-SP14/NACE No. 8

Brush-Off Blast Cleaning

SSPC-SP7/NACE No. 4

Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance

SSPC-SP18

 
Picture for SSPC-PA 2-2022, Procedure for Determining Conformance to Dry Coating Thickness Requirements
Available for download

SSPC-PA 2-2022, Procedure for Determining Conformance to Dry Coating Thickness Requirements

Product Number: SSPC-PA 2-2022
Publication Date: 2022
$109.00

This standard describes a procedure for determining shop or field conformance to a specified coating dry film thickness (DFT) range on ferrous and non-ferrous metal substrates using two types of nondestructive coating thickness gages (Type 1, magnetic pull-off, and Type 2, electronic) described in ASTM D7091

Picture for NACE No. 4/SSPC SP-7 Brush-Off Blast Cleaning (RP0794-94)
Available for download

SSPC-SP 7/NACE No. 4-2006, Brush-Off Blast Cleaning

Product Number: 21068-SG
ISBN: 1-57590-102-1
Publication Date: 2006
$109.00

Requirements for "Brush-Off"  - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives.  (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support