Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

Sequential Combining of Ultraviolet Light and Salt Spray Stresses: Toward the Next Generation of Test Methods

Sequential Combining of Ultraviolet Light and Salt Spray Stresses: Toward the Next Generation of Test Methods
Available for download

Protective coatings exposed to sunlight must withstand multiple environmental stresses: ultraviolet light, moisture, heat, corrosive chlorides and other salts, and atmospheric pollutants. Two decades after the publication of a sequential UV and cyclic salt spray test method in ASTM D5894, some efforts to create better and more predictive test methods have focused on delivering both UV and salt spray in a single chamber and adding additional stresses such as ozone exposure, air pressure fluctuations, atmospheric pollutants such as sulfur dioxide, and other environmental factors. 

Product Number: 51218-111-SG
Author: Sean Fowler, Andy Francis, Bill Tobin, David Duecker
Publication Date: 2018
Industries: Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

Protective coatings exposed to sunlight must withstand multiple environmental stresses: ultraviolet light, moisture, heat, corrosive chlorides and other salts, and atmospheric pollutants. Two decades after the publication of a sequential UV and cyclic salt spray test method in ASTM D5894, some efforts to create better and more predictive test methods have focused on delivering both UV and salt spray in a single chamber and adding additional stresses such as ozone exposure, air pressure fluctuations, atmospheric pollutants such as sulfur dioxide, and other environmental factors. A goal of such programs is an all-in-one test that combines most known stresses in order to accurately correlate real-world performance to the laboratory. There is sound logic in this approach because combining stresses reduces the risk of missing synergistic degradation pathways. However, these ambitious projects have yet to result in widely-adopted practices or new technology. It may be the case that such an approach will not be practical in the near future. At the same time, little work has been done to incrementally improve on the original, sequential method, despite a greatly increased chance of success. ISO 20340 standardized a similar sequential test cycle, but it has been criticized for its poor reproducibility. This paper will focus on the corrosion portion of these cycles because the weathering test has already been updated to provide better reproducibility. Although there are opportunities to create better weathering cycles, the critical factors in weathering have been controlled to a greater extent than corrosion tests for about 20 years. The paper will discuss flaws in common accelerated corrosion wet/dry cyclic tests, which are rooted in the technology available when they were developed. This critique will first be done from a simple theoretical framework supported by recent research. Experimental data using electrochemical corrosion measurement panels will be presented to supplement this framework and explore the potential to use this technology to accelerate the development of laboratory test methods.

Protective coatings exposed to sunlight must withstand multiple environmental stresses: ultraviolet light, moisture, heat, corrosive chlorides and other salts, and atmospheric pollutants. Two decades after the publication of a sequential UV and cyclic salt spray test method in ASTM D5894, some efforts to create better and more predictive test methods have focused on delivering both UV and salt spray in a single chamber and adding additional stresses such as ozone exposure, air pressure fluctuations, atmospheric pollutants such as sulfur dioxide, and other environmental factors. A goal of such programs is an all-in-one test that combines most known stresses in order to accurately correlate real-world performance to the laboratory. There is sound logic in this approach because combining stresses reduces the risk of missing synergistic degradation pathways. However, these ambitious projects have yet to result in widely-adopted practices or new technology. It may be the case that such an approach will not be practical in the near future. At the same time, little work has been done to incrementally improve on the original, sequential method, despite a greatly increased chance of success. ISO 20340 standardized a similar sequential test cycle, but it has been criticized for its poor reproducibility. This paper will focus on the corrosion portion of these cycles because the weathering test has already been updated to provide better reproducibility. Although there are opportunities to create better weathering cycles, the critical factors in weathering have been controlled to a greater extent than corrosion tests for about 20 years. The paper will discuss flaws in common accelerated corrosion wet/dry cyclic tests, which are rooted in the technology available when they were developed. This critique will first be done from a simple theoretical framework supported by recent research. Experimental data using electrochemical corrosion measurement panels will be presented to supplement this framework and explore the potential to use this technology to accelerate the development of laboratory test methods.

Product tags
Also Purchased
Picture for Timescale Correlation between Marine Atmospheric Exposure and Accelerated Corrosion Testing – Part 2
Available for download

51312-01730-Timescale Correlation between Marine Atmospheric Exposure and Accelerated Corrosion Testing – Part 2

Product Number: 51312-01730-SG
ISBN: 01730 2012 CP
Author: Eliza L. Montgomery
Publication Date: 2012
$20.00
Picture for 11353 Timescale Correlation Between Marine Atmospheric Exposure and Accelerated Corrosion Testing
Available for download

11353 Timescale Correlation Between Marine Atmospheric Exposure and Accelerated Corrosion Testing

Product Number: 51300-11353-SG
ISBN: 2011 11353 CP
Author: Eliza L. Montgomery, Jerome P. Curran, Luz M. Calle and Mark R. Kolody
Publication Date: 2011
$20.00

Evaluation of metal-based structures has relied on atmospheric exposure test sites to determine corrosion resistance in marine environments. This work uses surface chemistry and electrochemical techniques to interpret the chemical changes occurring on low carbon and stainless steel during atmospheric and accelerated corrosion conditions to find a correlation between its accelerated and long-term corrosion performance.
Picture for 08003 A Correlation of Accelerated Corrosion Testing with Real Life Exposure After 6 Years in a Coastal Env.
Available for download

08003 A Correlation of Accelerated Corrosion Testing with Real Life Exposure After 6 Years in a Coastal/Offshore Environment

Product Number: 51300-08003-SG
ISBN: 08003 2008 CP
Author: Darren Ward
Publication Date: 2008
$20.00

New high-solids coatings are sometimes required to meet volatile organic compound (VOC) legislation. Lack of data on same needs accelerated test methods to evaluate performance. The test method must: • Be performed using commercially available equipment • Take a relatively short time period. • Correlate with real life exposure.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support