AMPP Store - Science of Corrosion

Available for download

TR3T199-2020, Techniques for Monitoring and Measuring Corrosion and Related Parameters in Field Applications

Product Number: TR3T199-2020

Publication Date: 2020

$109.00

Revised in 2020! Assessment of corrosion in the field is complex because of the variety of applications, process conditions, and fluid phases that exist in industrial plants where corrosion occurs. A wide range of direct and indirect measurement techniques is available, but each technique has its strengths and weaknesses. In some applications, certain techniques cannot be used. Some techniques can be used online, while others are used off-line. Commonly, more than one technique is used so the weaknesses of one are compensated for by the strengths of another. In other cases, a combination of different techniques can be synergistic, such as process sampling along with detection of corrosion upset.

The purpose of this technical committee report is to analyze the various techniques with respect to their benefits and limitations across the broad spectrum of industries in which they are used.

This revision incorporates Guided Wave Monitoring (GWM), On-Line Gas Chromatography (GC), and Acoustic Solid Detection (ASD) techniques and updates references to NACE standards.

Available for download

Translational Corrosion Science

Product Number: 41216-959-SG

Author: D. Dunmire, G. Keller

Publication Date: 2016

$20.00

Translational Corrosion Science, the subject of the SSPC 2015 presentation by the Department of Defense Corrosion (DoD) Prevention and Control Program, is a science-based process to accelerate the development and application of high-quality solutions to difficult material degradation problems, and to do so more economically. DoD has launched the translational corrosion science program, assisted by the National Defense University and Potomac Institute for Policy Studies, to fully develop the process concept and to implement the approach.

Available for download

Two-Way Application of Corrosion Inhibitor in Gas and Condensate Field

Product Number: 51320-14398-SG

Author: Susumu Hirano, Takashi Ito, Toshiyuki Sunaba, Kazuyo Sasaya, Atsushi Kobayashi, Hironari Iijima

Publication Date: 2020

$20.00

A fit for purpose qualification of new corrosion inhibitors was carried out for in a gas and condensate field. The depth of production well is 4,500 m and the bottom hole temperature and pressure are 180ºC and 50 MPa respectively. The methodology and result of the inhibitor evaluation under a sweet condition was summarized. Two brands of corrosion inhibitors had been used each for production tubing and flowline in the field. New corrosion inhibitors were evaluated for the both applications. The corrosion inhibitor efficiency for high shear service and the adhesion tendency were evaluated with a rotating cage autoclave and a dip and drip experiment respectively. In order to evaluate the tendency of emulsion forming, oil, brine and an inhibitor were poured into a centrifuge tube and it was shaken intensely. Gas chromatograph - mass spectrometer (GC-MS) and Fourier transform infrared spectroscopy (FT-IR) were studied to measure the residual amount of inhibitor. Finally, the field trial was conducted with a new inhibitor. The new inhibitor was adopted successfully for the both services. The risk of emulsion forming became lower because the mixing of two brands of inhibitors was avoided. Reducing the number of the chemicals contributed to reduction of the operation cost too.

Available for download

Understanding the Discrepancies in Wet Bottom and Dry Bottom MASTMAASIS Testing Results of AA2060

Product Number: 51317--9171-SG

ISBN: 9171 2017 CP

Author: Mary Parker

Publication Date: 2017

$20.00

In the current study, in-situ measurements were used to deconstruct the testing environment of dry-bottom (DB) ASTM G85-A2 to provide an understanding of what makes this test successful when others are not.

Available for download

Using Digital Image Correlation to Improve Stress-Corrosion Cracking Evaluation by NACE TM0177-B

Product Number: 51317--8992-SG

ISBN: 8992 2017 CP

Author: Brandi Clark

Publication Date: 2017

$20.00

NACE TM0177 Method B is a standard method for evaluating stress-corrosion cracking resistance. Here, Digital Image Correlation determined strain distributions over the surface of bend samples made from corrosion-resistant alloys.

Science of Corrosion

TR3T199-2020, Techniques for Monitoring and Measuring Corrosion and Related Parameters in Field Applications

Translational Corrosion Science

Two-Way Application of Corrosion Inhibitor in Gas and Condensate Field

Understanding the Discrepancies in Wet Bottom and Dry Bottom MASTMAASIS Testing Results of AA2060

Using Digital Image Correlation to Improve Stress-Corrosion Cracking Evaluation by NACE TM0177-B

Association for Materials Protection and Performance