Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!
On-site measurement of the surface profile of abrasive blast cleaned steel. Compares with lab measurements on surfaces rated as NACE Nos. 1, 2, or 3 standards. Implementation. Historical Document 1995
Or
This recommended practice describes a procedure for on-site measurement of the surface profile of abrasive blast cleaned steel surfaces that have a surface profile, as defined between 1.5 and 4.5 mils (38 and 114 µm). The procedure described has been demonstrated to correlate well with the surface profile measurements obtained by the defined laboratory procedure on non-rusted panels prepared to a degree of cleanliness as shown in NACE Nos. 1, 2, or 3. Suggestions are given regarding the implementation and use of this procedure.
Historical Document 1995
NACE/SSPC Joint Surface Preparation Standards Package.
SSPC-SP 5/NACE No. 1-2006, White Metal Blast Cleaning
SSPC-SP 10/NACE No. 2-2006, Near-White Metal Blast Cleaning
SSPC-SP 6/NACE No. 3-2006, Commercial Blast Cleaning
SSPC-SP 7/NACE No. 4-2006, Brush-Off Blast Cleaning
SSPC-SP 13/NACE No. 6-2018, Surface Preparation of Concrete
SSPC-SP 14/NACE No. 8-2006, Industrial Blast Cleaning
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Use this error code for reference:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Requirements for "Near-White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)
Requirements for "Brush-Off" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)