Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!
This paper presents the results after 10 year-evaluation from an Iberoamerican project called “Effect of the environment on reinforcement durability” (DURACON). This project correlates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures in nine countries (Bolivia Chile Colombia Costa Rica Mexico Spain Uruguay Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized physically by measuring compressive strength elastic modulus total and effective porosity as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country following strict procedures which enabled the preparation of similar concrete specimens. Two water/cement (w/c) ratios (0.45 and 0.65) were selected where 0.45 w/c ratio concrete had a minimum cement content of 400 kg/m3 and the one with 0.65 w/c ratio a minimum 28-day compressive strength of 210 kg/cm2. Type I Portland cement siliceous sand and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. The results showed the differences in behavior between tropical and non-tropical environments being the tropical countries the most aggressive ones.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Use this error code for reference:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.