AMPP Store - Products tagged with 'pipelines'

Available for download

NACE SP0375-2018, Field-Applied Underground Wax Coating Systems for Underground Metallic Pipes: Application, Performance, and Quality Control

Product Number: 21013-SG

$179.00

HISTORICAL DOCUMENT. This NACE International standard practice includes guidelines for surface preparation, material requirements, application, and handling of hot- and cold-applied wax and component wrappers and wax-based tape coating systems for the protection of underground pipe, fittings, and valves. The standard outlines material requirements for hot- and cold-applied wax coatings, and handling of the coated components, and includes five tables that provide material requirements and references to standard test methods for the various coating materials discussed. This standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, and construction engineers and managers.

Available for download

NACE SP0375-2024, Field-Applied Underground Wax Coating Systems for Underground Metallic Pipes: Application, Performance, and Quality Control

Product Number: NACE SP0375-2024

Publication Date: 2024

$109.00

This standard covers surface preparation, material requirements, application, and handling of hot- and cold-applied wax and component wrappers and wax-based tape coating systems for the protection of underground pipelines, and valves. This standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, application contractors, and construction engineers and managers. The use of this standard in coordination with the manufacturer of the referenced materials herein will reduce the chance of their misapplication and will maximize their potential to provide long-term corrosion protection. This standard is also referenced by NACE SP0169, “Control of External Corrosion on Underground or Submerged Metallic Piping Systems.”

Available for download

NACE SP0716-2023, Soluble Salt Testing Frequency and Locations on Previously Coated Surfaces

Product Number: NACE SP0716-2023

Publication Date: 2023

$109.00

Asset owners, engineers, consultants, coating contractors, inspectors, and others are specifying allowable levels of surface soluble salts to prevent premature coating failures. The purpose of this standard is to provide guidance about the number of and locations for soluble salt tests on steel surfaces.

This standard establishes siting and frequency requirements for soluble salt testing before the application of a subsequent coating system to previously coated substrates and replacement substrate material. It does not include allowable limits of soluble salts, which are typically addressed by the procurement documents or the coating manufacturer’s documentation.

Available for download

NACE TM0115-2022, Cathodic Disbondment Test for Coated Steel Structures Under Cathodic Protection

Product Number: NACE TM0115-2022

Publication Date: 2022

$109.00

REAFFIRMATION. This AMPP standard test method specifies procedures to evaluate cathodic disbondment resistance of the steel structure coating systems under cathodic protection, such as buried or submerged pipeline and tank linings. The standard covers all test specimen geometries and test temperatures. This standard also takes into consideration all test parameters with the goal of the standard to be used during the selection of protective coating systems for use under cathodic protection. This test method is intended for use by facility owners, coating applicators, and coating manufacturers.

Available for download

NACE TM0215-2022, Test Method for Measurement of Gouge Resistance of Coating Systems

Product Number: NACE TM0215-2022

Publication Date: 2022

$109.00

This standard describes the design and operation of an apparatus to determine the gouge resistance of pipe coatings. It is intended to be used by pipeline operating companies, pipeline owners, pipeline contractors, pipeline inspection services, and pipeline coating mills.

Available for download

NACE TM0497-2022, Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems

Product Number: NACE TM0497-2022

Publication Date: 2022

$109.00

This test method provides descriptions of the measurement techniques and cautionary measures most commonly used on underground and submerged piping other than offshore piping to determine whether one or more selected criterion has been met at a representative test site(s) with consideration for special conditions. These methods are also applicable to many other underground or submerged metallic structures.

Available for download

NACE TM21420-2018, Test Method for Measurement of Peel Strength of Multilayer Polyolefin

Product Number: 21420-SG

Publication Date: 2018

$179.00

HISTORICAL DOCUMENT. This NACE International test method describes a reliable methodology for determining the peel strength of polyolefin-based multilayer pipeline coating systems, generally for coating thickness less than 12 mm (0.47 in). This standard provides a method to measure the peel strength of polyolefin-based multilayer coating systems, such as 2-layer polyethylene coating [2LPE], 3-layer polyethylene [3LPE], 3-layer polypropylene [3LPP], and heat shrink sleeve[HSS] field joint coating. It provides essential information on the quality of the applied coating. This is particularly important for field-applied coatings, of which the application process is significantly impacted by the environmental conditions and the skill set of the field applicators. This test method is intended for use by pipeline operating companies, pipeline owners, pipeline contractors, pipeline inspection services companies, and pipeline coating mills.

Peabody's Control of Pipeline Corrosion, 3rd Edition

Product Number: 37617-POD

ISBN: 978-1-57590-336-1

Author: by A.W. Peabody, edited by Ronald Bianchetti

$160.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

For over 50 years Control of Pipeline Corrosion, written by A.W. Peabody, has been the most trusted resource in the field of pipeline corrosion. This revised and updated third edition of the classic reference continues the tradition of excellence by providing the most thorough and authoritative coverage of the prevention and control of pipeline corrosion, and now includes a chapter on AC interference.

Peabody's Control of Pipeline Corrosion, Third Edition, edited by Ronald Bianchetti, blends traditional corrosion engineering practices with modern technologies to make this the single source for corrosion control. Chapters have updated information and graphics to expand on the user-friendly nature of the original book.

2018 NACE, 316 pages, 8 x 10" trim size, soft bound.

Available for download

Pipe Preservation During Trenchless Installations: There’S No Need To Take Unnecessary Risks

Product Number: 51321-16671-SG

Author: Cristian Grecco

Publication Date: 2021

$20.00

Pipeline Coatings

Product Number: 37616-POD

ISBN: 978-1-57590-335-4

Author: Y. Frank Cheng

$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.

2017 NACE, 7" x 9", soft cover, 264 pages

Available for download

Pipeline Coatings

Product Number: 37616-pdf

ISBN: 978-1-57590-443-6

Author: Y. Frank Cheng

$130.00

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.

Pipeline Coatings-Chapter 3: Development of Pipeline Coatings

Product Number: 37616-Ch03

$75.00

The evolution and development of pipeline coating technology can be traced to the 1940s and continues to be of global interest. The industry's understanding of pipeline coatings has evolved to a stage that delivers a comprehensive review of the scientific, technical, and practical aspect of pipeline coatings.

AMPP's best-selling title Pipeline Coatings covers all of that as well as defining a pipeline integrity management (PIM) program that includes five steps to maximize integrity and safety.

Chapter 3 of Pipeline Coatings, "Development of Pipeline Coatings," focuses on the oil and gas industry. Generally, pipeline coatings are divided into two categories--plant applied and field-applied coatings. Chapter 3 describes primary coatings in both categories including coal tar, asphalt, liquid epoxy, and many more.

2017 AMPP, black and white, 41 pages, pdf

Products tagged with 'pipelines'

Association for Materials Protection and Performance