AMPP Store - Products tagged with 'fabrication'

Available for download

07421 Fabricating Nickel Alloy Products to Avoid Stress Relaxation Cracking

Product Number: 51300-07421-SG

ISBN: 07421 2007 CP

Author: Lewis E. Shoemaker, Gaylord D. Smith, Brian A. Baker, and Jon Poole

Publication Date: 2007

$20.00

Various alloys subjected various heat treatments were examined in-service and tested to determine their susceptibility to stress relaxation cracking.

Available for download

10337 An Advanced Super-Austenitic Stainless Steel Offers Economical and Technical AdvantagesOver Nickel-Base Corrosion-Resistant Alloys in the Process Industries

Product Number: 51300-10337-SG

ISBN: 10337 2010 CP

Author: Ruben Muro, Marlena Neighbor, Lewis Shoemaker and James R. Crum

Publication Date: 2010

$20.00

An advanced grade of super-austenitic stainless steel with a reduced content of nickel offers a significant economic advantage over nickel-base CRA’s. As the alloy is readily fabricated by conventional techniques, it is an excellent candidate for a variety of applications in the chemical, petrochemical, mining, oil and gas, and refining industries.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

Asset Integrity Confidence Enhancement: A Case Study in Enhancing Facilities Integrity through the Management of Inherited Risk from the Manufacturing and Fabrication Phase of a Facility's Life Cycle

Product Number: 51324-21067-SG

Author: Tan Su Anne; Nurul Asni Bt Mohamed; M Aswadi B Ton Alias; M Iskandar B Bakeri

Publication Date: 2024

$40.00

Asset integrity management is an essential part of the Mechanical Integrity element in the Process Safety Management framework. Programs such as risk-based inspection evaluate operational risks and establishes inspection plans to prevent unplanned facility failures. However, an effective Asset Integrity practice should also consider residual risks originating from the manufacturing and fabrication phase. Neglecting these risks can lead to unexpected failures during operations. A recent incident arising from improper heat treatment of stainless steel components in high-temperature refinery service highlighted the need for enhanced integrity measures. In response to this, a materials assessment was initiated, analyzing data from the equipment quality dossier. Gaps in manufacturing and fabrication processes were identified, and mitigated by a customized inspection program. This paper discusses crucial factors during manufacturing and fabrication that may cause degradation of material properties, resulting in premature failure. Additionally, it explores safety risks and other identified gaps from the study, along with the corresponding mitigation measures.

Available for download

Factors On Tank Lining For Corrosion Prevention

Product Number: 51321-16583-SG

Author: N. S. S. Rajan

Publication Date: 2021

$20.00

Available for download

NACE Publication 8X294-2013-SG, "Review of Published Literature on Wet H2S Cracking of Steels Through 1989"

Product Number: 24185-SG

Publication Date: 2013

$109.00

Published reports of laboratory tests and plant experience pertaining to the cracking of steels in wet H2S service. Environmental, fabrication, and metallurgical parameters involved in the cracking process.

Available for download

NACE SP0200-2023, Steel-Cased Pipeline Practices

Product Number: NACE SP0200-2023

Publication Date: 2023

$109.00

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Available for download

NACE SP0205-2021, Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

Product Number: NACE SP0205-2021

Publication Date: 2021

$109.00

Sulfuric acid (H₂SO₄) is the largest volume commodity chemical in use today.It plays some part in the production ofnearly all manufactured goods. One large use of concentrated sulfuric acid is used as a catalyst for refinery alkylationunits.Intheseunits,C3-C5olefinssuchaspropyleneorbutylenearereactedwithisobutanetoformgasoline-blendingcomponents such as isoheptane and isooctane.These gasoline-blending components are used to boost octane forautomobileandaviationfuels.

Most refineries have an alkylation unit that uses either hydrofluoric acid (HF) or sulfuric acid as the alkylation catalyst.Thisstandarddealswithspentsulfuricacidassociatedwiththesulfuricacidalkylationprocessonly.

Available for download

RP0590-1990, Recommended Practice for Prevention, Detection and Correction of Deaerator Cracking

Product Number: 53075-HD1990

Author: NACE International

Publication Date: 1990

$179.00

Inspection of deaerator system welds. Boiler feedwater deaerator cracking. Design and fabrication of vessels and repair of existing vessels. Operational and water chemistry parameters. Historical Document 1990

Available for download

SP0387-2019 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications

Product Number: 21036-SG

ISBN: 1-57590-081-5

Publication Date: 2019

$109.00

Defines minimum physical quality and inspection standards for cast sacrificial anodes for offshore applications.

Products tagged with 'fabrication'

Association for Materials Protection and Performance