AMPP Store - Products tagged with 'standard practice'

Available for download

Development of a Slurry Erosion Test standard of Industrial Maintenance Coatings

Product Number: 41215-936-SG

Author: David Tordonato, Bobbi Jo Merten, Allen Skaja

Publication Date: 2015

$20.00

Over the past several years, the Bureau of Reclamation’s Materials Engineering Research Laboratory has been developing and refining a test method to evaluate a coating’s resistance to erosion damage in sediment-laden immersion exposure. This test has initially been utilized as a screening/ranking method in selection of new coatings for the aforementioned severe service environments.

Available for download

NACE SP21427-2019 “Detection and Mitigation of Stray-Current Corrosion of Reinforced and Prestressed Concrete Structures”

Product Number: 21427-SG

Publication Date: 2019

$179.00

HISTORICAL DOCUMENT. This NACE International standard practice establishes the general principles to be adopted to minimize the effects of stray current corrosion caused by direct current (DC) and/or alternating current (AC) from external sources on steel reinforced concrete (RC) and prestressed concrete (PC) structures or structural elements. The standard practice offers guidance for the design of concrete structures that may be subject to stray-current corrosion; the detection of stray current interference; the selection of protection measures; and the selection of mitigation methods.

Available for download

NACE SP21459-2020/IEEE Std 2655-2018, “Atmospheric Above Grade Inspection and Assessment of Corrosion on Steel Electrical Transmission, Distribution, and Substation Structures”

Product Number: SP21459-2020

ISBN: 1-57590-408-X

Publication Date: 2020

$109.00

There are an estimated 900,000 electric utility steel transmission and distribution structures in North America alone. The majority of these structures were installed between 1950 and 1990. These structures are now an average of about 45 years of age. The age of these structures dictates an inspection and assessment procedure to determine the level of corrosion affecting the above-grade atmospherically exposed portions of this important segment of our infrastructure.

Prior to the publication of this standard, no industry practice existed to help electric utilities determine a prioritized listing of structures to be inspected or that described an inspection and assessment procedure to evaluate above-grade atmospheric corrosion problems.

Available for download

NACE SP21469-2021, Corrosion Inhibition Selection and Management for Oil and Gas Production

Product Number: SP21469-2021

Publication Date: 2021

$109.00

This NACE Standard Practice aims to provide guidance for selection and application of Corrosion Inhibitors (CI) for upstream oil and gas processes conditions exposed to corrosive environments.

The application of effective Corrosion Inhibitors (CI) in Oil and Gas production is essential to enable long term use of carbon steel in corrosive production environments. These chemical CI products can be applied continuously, or on a Batch (BI) basis. The effectiveness of CIs(products) that are applied has to be assured for the range of conditions associated with the application and for the lifetime of the facility. The assurance is predominantly achieved through laboratory testing. However, field evaluation of CIs can be a significant part of the assurance process.

Available for download

SP0106-HD2006, Control of Internal Corrosion in Steel Pipelines and Piping Systems

Product Number: 21111-HD2006

ISBN: 1-57590-208-7

Publication Date: 2006

$179.00

Procedures and practices for effective control of internal corrosion in steel pipe and piping systems in crude oil, refined products, and gas service.

Available for download

SP0407-HD2013-SG, Format, Content, and Guidelines for Developing a Materials Selection Diagram

Product Number: 21123-HD2013

ISBN: 1-57590-212-5

Publication Date: 2013

$179.00

Developing a materials selection diagram (MSD) to document the materials selection of new equipment and piping for the refinery, process chemical, power, and other industries. HISTORICAL DOCUMENT

Available for download

Use of Paint 44/Guide 22, Standards, Training and Certification in the Wastewater Industry

Product Number: 51217-058-SG

Author: Bob Murphy

Publication Date: 2017

$20.00

This paper will provide information on the standards used in evaluating and determining correct application and selection of protective coatings and linings used in the wastewater industry. It will also highlight certification that can be used in evaluating contractors and inspection companies used in the coating and lining process.

Available for download

Writing Effective Corrective Actions Workshop

Product Number: 51219-170-SG

Author: Cory Allen

Publication Date: 2018

$20.00

This paper will discuss a hands-on workshop, interactive session to train participants to write effective corrective actions as they relate to typical problems for an industrial coating contractor. This workshop should be particularly helpful to coating contractors who are QP certified by SSPC. QP1, QP3, and QS1 certified contractors are required to document corrective actions.

Products tagged with 'standard practice'

Association for Materials Protection and Performance