AMPP Store - Products tagged with 'corrosion resistance'

Available for download

Improving the Performance of Epoxy-Polysiloxane Coatings

Product Number: 41215-907-SG

Author: Dean Kondos, Vikram Kumar, Kujtim Bizati, Christian Geismann, Martin Wusik

Publication Date: 2015

$20.00

A new patent-pending resin technology incorporated into the epoxy/polysiloxane part A portion of a two-component coating system, using an amino-silane curing agent, has shown significant improvements in flexibility, gloss and color retention. Corrosion resistance and adhesion to non-sandblasted metal substrates have also shown improvements. The new resin technology may be considered for low-VOC and HAPs coating systems.

Available for download

Innovative Performance Corrosion Resistance Reinforcing Bars for Extending Service Life

Product Number: 51324-20682-SG

Author: Salem Faza; Homero Castaneda Lopez; Michael Stroia

Publication Date: 2024

$40.00

Performance of Corrosion Resistance reinforcing steel bars including continuous galvanized (ASTM A1094) and Low-Carbon Chromium Steel bars (ASTM A1035 CS) have been evaluated for their high corrosion resistance and their mechanism to extend the service life of concrete structures. ASTM A1094 is galvanized rebar with a zinc alloy coating that provides the well-known corrosion protection of zinc and the added benefit of exceptional formability . ASTM A1094 can be bent and fabricated after galvanizing without fear of peeling or flaking unlike Batch hot dip galvanizing and epoxy coated rebars. ASTM A1035 CS rebar’s combination of high strength rebar, corrosion resistance and ductility are proven to provide superior blast protection for concrete structures. The high strength can withstand stronger forces, while the ductility dissipates the force across the structural member. In addition, the high strength rebar can be used to efficiently design structures up to 100 Ksi (690 MPa) reducing construction costs and time. Corrosion research findings discussed in this paper illustrate the efficiency in using these bars to extend the service life of concrete structures depending on the required service life of the DOD structures. In addition to the service life capabilities, supply chain availability should be considered.

Available for download

Introduction to Zero VOC High Performance Waterborne Epoxy Systems in Industrial Protective Coating Application

Product Number: 51217-084-SG

Author: Yong Zhang

Publication Date: 2017

$20.00

Coatings designed for heavy duty applications in the Maintenance and Protective Coatings market are exposed to aggressive environments such as aggressive chemical solvents, marine atmospheres, UV light, abrasion, among others. In the US as well as other areas of the world, coatings designed for these applications have been primarily solvent borne.

Available for download

Low VOC Waterborne DTM Coatings for Use in Industrial Maintenance Painting

Product Number: 41208-448-SG

Author: Leo J. Procopio, Anne M. Bacho, Justin E. Gimbal, Gary R. Larson, William J. Rosano, Laura M. Vielhauer

Publication Date: 2008

$20.00

Increasingly demanding environmental regulations for industrial maintenance coatings have put pressure on manufacturers and users of both solvent borne and waterborne coating systems. The lowering of volatile organic compound (VOC) levels to as low as 100g/L is being considered for industrial maintenance coatings in many regions of the country and has already been implemented in the South Coast Air Quality Management District region of California.

Available for download

MR0175 Changes 2015: Changes to MR0175 Between 2009 and 2015

Product Number: 21311-SG

Publication Date: 2015

$420.00

All three parts of ANSI/NACE MR0175/ISO 15156 with changes made to the 2009 edition and published in the 2015 edition marked for easy reference. The changes are clearly shown.

Available for download

New Developments in Fluorourthane Coatings for Bridges

Product Number: 41216-995-SG

Author: Robert Parker, Kristen Blankenship

Publication Date: 2016

$20.00

Fluorourethane coatings based on FEVE, fluoroethylene vinyl ether chemistry, have been used globally for over 30 years. This technology has a proven record of outstanding performance against exposure to the elements and has been used in applications ranging from aerospace to architectural structures. Recently, the bridge market has taken notice of this high performance, especially in harsh marine environments. Resistance to degradation by UV light is important to the longevity of a bridge structure, but it could be argued that corrosion resistance is the key performance indicator for a protective topcoat.

Available for download

New Developments in High Productivity Cladding Process and in LNG application.

Product Number: MPWT19-15283

Author: Torchiana ing. Paolo

Publication Date: 2019

$0.00

Esab is always committed to technological innovations to support its customers in improving productivity and quality in their production units. This high focus has recently brought to the market an innovative cladding solution.
It is about the Integrated Cold Electrode for SAW process, launched in 2012 for joining application only. However, taking the benefits of its high flexibility and of the continuous development around it, it is now also possible to use it for cladding applications. It delivers the required weld deposit chemistry in a single layer solution by combining different wire grades with very low dilution.
Esab also has a long experience in LNG application, where a dedicated flux is well known all over the world. It has been designed some years ago to reduce crack susceptibility when NiCrMo wires are used to weld 9%Ni plates.

Available for download

New Experiences With Explosion Clad Alloys UNS N06058 And UNS N06059

Product Number: 51322-17650-SG

Author: P. Hübner, H. Alves, O. Sarrat, R. Behrens, D. Niespodziany, J. König

Publication Date: 2022

$20.00

The alloys used as clad material for this study are members of the so-called “C-family”. It consists of Ni-Cr-Mo alloys, which are known for combining the corrosion resistance of Ni-Cr alloys in oxidizing media with corrosion resistance of Ni-Mo alloys in reducing media. As a result, these materials have proven to be extremely durable in a wide range of highly aggressive media. The development of these materials started in the 1930s with Alloy C. This alloy showed remarkable corrosion resistance in a wide spread of media, low sensitivity for pitting or crevice corrosion and virtual immunity to chloride induced stress corrosion cracking.

Available for download

Newly Developed Waterborne Phenalkamine for Corrosion Resistant Primers

Product Number: 51217-083-SG

Author: Hong Xu, Fernanda Tavares, Donald C. Lawson III, Jing Hu, Anbu Natesh

Publication Date: 2017

$20.00

Cashew Nutshell Liquid (CNSL) is a non-edible, renewable biomaterial extracted from the honeycomb-like structure of the cashew nut. Its main component, cardanol, is produced by the decarboxylation of CNSL and it contains a highly hydrophobic aliphatic side chain. Cardanol is used in the synthesis of phenalkamines, which are widely used in marine, protective and industrial coatings applications. Historically, phenalkamines have been used in solvent systems, but recently, a new technology was developed that enables a very hydrophobic phenalkamine to be stably packaged in water.

Available for download

Non-Metallic Materials for Design and Construction of Mineral Extraction Equipment

Product Number: 51323-19455-SG

Author: K. Lambrych, L.J. Bennett

Publication Date: 2023

$20.00

Rare earth elements (REE) and lithium are metals that are considered critical materials due to their use in electronics, magnets, batteries, and a wide variety of industrial processes important for the economy and military preparedness. Today, these metals are commonly harvested as metal oxide, halide or hydroxide minerals. Fiber reinforced p with even greater design temperatures lastic (FRP) has been used with great success for more than 50 years to build corrosion resistant mineral processing equipment.

Available for download

On the Topographical and Performance Effects of Underblasted and Reblasted Carbon Steel Substrate

Product Number: 51220-278-SG

Author: Carl Reed, Kat Coronado, Heather Cui

Publication Date: 2020

$20.00

In this study, the effect on coating corrosion resistance after remediating an under-blasted then remediated to standard preparation is undertaken. In this work, it is proposed to under-blast one set of panels (~1 mil profile), blast to standard one set of panels (~3 mil profile) and remediate to standard a set of under-blasted panels (from ~1 mil profile to ~ 3 mil profile).

Available for download

Performance Characterization of Waterborne Sol Gel Derived Epoxy-Amine Silane Coating on Aluminum Alloy

Product Number: 41207-346-SG

Author: S.S. Pathak, A. S. Khanna, T. J. M. Sinha

Publication Date: 2007

$20.00

Waterborne coatings are of growing importance in appliance, automotive refinish, concrete, traffic marking and high performance coatings due to increasing environmental regulation to reduce volatile organic compounds (VOC) and ease of handling. The resins commonly used for conventional solvent borne coating are usually modified by increasing their hydrophilic nature prior to being incorporation into a waterborne coating formulation.

Products tagged with 'corrosion resistance'

Association for Materials Protection and Performance