AMPP Store - Products tagged with 'material selection'

Available for download

04257 Control of Corrosion and Service Life

Product Number: 51300-04257-SG

ISBN: 04257 2004 CP

Author: Vinod S. Agarwala, Naval Air Systems Command

Publication Date: 2004

$20.00

Service life of any weapon system depends upon factors that impart long-term durability and robustness to its structure and subsystems, while sustaining its functional properties. The paper describes basic principles and guidelines on corrosion control and rules that could be easily followed to ascertain some specified service life and reduce total ownership costs.

Available for download

10183 Prediction and Assessment of Rich Amine Corrosion Under Simulated Refinery Conditions

Product Number: 51300-10183-SG

ISBN: 10183 2010 CP

Author: Vishal V. Lagad, Michael S. Cayard and Sridhar Srinivasan

Publication Date: 2010

$20.00

Experimental results and findings from a joint industry program entitled “Prediction and Assessment of Corrosion in Amine Solvents” conducted over the period from March 2003 to May 2007. An overview of experimental methods, observed results and trends, as well as comparison of predicted corrosion rates to refinery field data.

Available for download

51316-7298-Application of Non-Metallic Materials in Oil Sands Operations

Product Number: 51316-7298-SG

ISBN: 7298 2016 CP

Author: John Wolodko

Publication Date: 2016

$20.00

Oil sands production has unique challenges in terms of materials selection and long-term performance. This paper provides a general overview of various oil sands recovery and upgrading processes, and outlines areas where polymers and composites could be effectively utilized. Case studies.

Available for download

51318-10688-Evaluation of Corrosion and EAC Susceptibilities of Materials Used for Wireline/Slickline Downhole Environment in HPHT Sour Environment

Product Number: 51318-10688-SG

Author: Jie He / Lizheng (Leo) Zhang / Rachel Zhou / Adan Herrera / David Ball / Peter Ellis

Publication Date: 2018

$20.00

Corrosion and EAC resistance of 14 heats of wireline materials, including a cold-rolled carbon steel, low-alloy steels, stainless steels, titanium alloys, nickel-based alloys, and copper-based alloys, were evaluated.

Available for download

51318-10842-Good Fabrication Stage Practices to Mitigate Risks Associated with Wet H2S Caustic Amine Carbonate Corrosion and Cracking

Product Number: 51318-10842-SG

Author: Jigneshkumar J. Desai / Ashik S. Murthy / Cathleen Shargay

Publication Date: 2018

$20.00

Brief descriptions of the mechanisms of common types of corrosion attacks in petrochemical and refinery environments viz. Wet H2S, Caustic, Amine, Carbonate corrosion and cracking.

Available for download

51318-11109-INTEGRATED CATHODIC PROTECTION (CP) SENSOR NETWORK – DEVELOPMENT OF THE CP SENSOR

Product Number: 51318-11109-SG

Author: Kristian K. Wold / Roy Johnsen / Mariano Iannuzzi / Lars Årtun /

Publication Date: 2018

$20.00

A new CP monitoring approach to quantify the health of the CP system in real-time with spatial resolution. Spatial resolution is achieved by an integrated sensor network distributed across a Subsea Production System.

Available for download

51318-11600-Material selection and recent case histories with nickel alloys

Product Number: 51318-11600-SG

Author: Helena Alves

Publication Date: 2018

$20.00

The aim of this paper is to review the main aspects of the material selection for the chemical process industry (CPI) and present different examples to illustrate the material selection process.

Available for download

Abrasive Selection Economics – Cost or Price?

Product Number: 51219-191-SG

Author: Brad Gooden

Publication Date: 2019

$20.00

The easiest way to compare abrasives is to look at the price per unit (i.e., price per ton or price per pound). If only it were that easy! Unfortunately comparing the price per unit assumes that all abrasives perform the same – and we all know that is not the case.

Available for download

ANSI/NACE MR0175-HD1995-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment-HD1995

Product Number: 21302-HD1995

Author: NACE International

Publication Date: 1995

$179.00

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. Historical Document 1995

Available for download

Application of Protective Coating for Rehabilitation of Wisconsin Concrete Bridges

Product Number: 41208-415-SG

Author: Al Ghorbanpoor, Edward A. Fitzgerald, Habib Tabatabai

Publication Date: 2008

$20.00

This paper describes the results of a research study to determine the effectiveness of various rehabilitation materials and techniques for concrete bridges. This work reflects the needs for identifying effective materials and techniques to offer protection against corrosion of steel in concrete as well as patch repair in concrete girders.

Available for download

Beating the Odds for Successful Concrete Flooring Installations

Product Number: 41216-970-SG

Author: Fred Goodwin, Lori Proops, Richard First

Publication Date: 2016

$20.00

Failure of flooring materials is usually due to a combination of factors rather than a single, simple cause that led to below expectation performance. For example, construction on a less than high quality concrete slab on grade, combined with the absence of a vapor retarder, with residual concrete wear and contamination, followed by inadequate surface preparation, and finally poor coating selection applied during inclement ambient conditions that is turned over early to severe service is a recipe for disaster.

Available for download

Breathing the Fresh Air of Compliance: Establishing an OSHA Compliant Respiratory Protection Program

Product Number: 41215-880-SG

Author: Nicholas P. Bozzuto

Publication Date: 2015

$20.00

With over 5 million respirator users in approximately 1.3 million United States workplaces, Respiratory Protection is a perennial “Top 5” most cited OSHA violation. 2013 saw 3,995 violations, taking fourth place and increasing 64% from 2012 (also the fourth-most cited standard) (1). The number one reason for citation – lack of a written program. 29CFR1910.134 is the OSHA standard that covers Respiratory Protection (2). A written program is required in any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer.

Products tagged with 'material selection'

Association for Materials Protection and Performance