AMPP Store - Products tagged with 'oil and gas'

Available for download

06112 FUNDAMENTAL ASPECTS OF CO2 METAL LOSS CORROSION – PART II: INFLUENCE OF DIFFERENT PARAMETERS ON CO2 CORROSION MECHANISMS

Product Number: 51300-06112-SG

ISBN: 06112 2006 CP

Author: Guenter Schmitt, Michaela Hörstemeier

Publication Date: 2006

$20.00

The literature has been reviewed with respect to information gained in the recent 20 years on CO2 corrosion of materials used in the oil and gas industry. The paper discusses the effect of materials related, medium-related and interface-related parameters on general (uniform) and localized corrosion. Part II

Available for download

10294 Mercury Liquid Metal Embrittlement of Alloys for Oil and Gas Production and Processing

Product Number: 51300-10294-SG

ISBN: 10294 2010 CP

Author: Raymundo Case and Dale R. McIntyre

Publication Date: 2010

$20.00

This paper reports liquid metal embrittlement (LME) test results for a variety of common oilfield and processing plant alloys exposed to liquid mercuryp across a range of temperatures. Test methods used include slow strain rate testing and C-ring tests.

Available for download

10332 Sour and Sweet Corrosion of Carbon Steel: General or Pitting or Localized or All of the Above?

Product Number: 51300-10332-SG

ISBN: 10332 2010 CP

Author: Sankara Papavinasam, Alex Doiron, Jian Li, Dong-Yeob Park, and Pei Liu

Publication Date: 2010

$20.00

Analysis of corrosion of carbon steel in sour and sweet environments. Non-classical nature of localized pitting corrosion of carbon steel in sour and sweet environments explained. Description of a model to predict internal pitting corrosion of carbon steel under sour and sweet environments,

Available for download

51318-10568-Quality & Performance Review of Duplex Stainless Steel Products – An End Users Perspective

Product Number: 51318-10568-SG

Author: Janardhan Rao Saithala / Gurram Bhaskar Rao / Manoj Suryanarayana / Talal Nebhani / Pedro Rincon / Nasser Behlani / Mohammed Ghafri / Amjad Kharusi

Publication Date: 2018

$20.00

Quality assurance and procurement & construction challenges associated with DSS materials and operational best practices to ensure integrity and meet intended design life cycle of DSS components.

Available for download

51318-10593-OPTIMIZED COSTING OF CORROSION CONTROL METHODS IN OIL AND GAS FACILITIES

Product Number: 51318-10593-SG

Author: Arun S. Agarwal / Gerry Koch / Narasi Sridhar / Abdulhameed Al-Hashem

Publication Date: 2018

$20.00

A case study is presented for the Life Cycle Costing (LCC) analysis to quantify and compare different corrosion mitigation methods. Strategies to minimize the costs due to corrosion are included.

Available for download

51318-10688-Evaluation of Corrosion and EAC Susceptibilities of Materials Used for Wireline/Slickline Downhole Environment in HPHT Sour Environment

Product Number: 51318-10688-SG

Author: Jie He / Lizheng (Leo) Zhang / Rachel Zhou / Adan Herrera / David Ball / Peter Ellis

Publication Date: 2018

$20.00

Corrosion and EAC resistance of 14 heats of wireline materials, including a cold-rolled carbon steel, low-alloy steels, stainless steels, titanium alloys, nickel-based alloys, and copper-based alloys, were evaluated.

Available for download

51318-10862-ASSESSING THE IMPACT OF INSULATION CHOICE ON CORROSION IN A HIGH HUMIDITY DUAL TEMPERATURE ENVIRONMENT

Product Number: 51318-10862-SG

Author: Dr. Mark Swift

Publication Date: 2018

$20.00

Details of a second procedure developed by the testing centre INNCOA to assess the performance of several insulation systems with respect to the ingress of water vapour through a damaged section of the covering layer.

Available for download

51318-10993-Optimizing Biocide Selection for Stimulation Applications

Product Number: 51318-10993-SG

Author: Christy C. Wentworth, Ph.D. / Nkabuije Maduike, Ph.D. / Jeffrey F. Kramer, Ph.D.

Publication Date: 2018

$20.00

An enhanced biocide selection evaluation that extends past the traditional selection process to include stability and performance with a larger range of fracturing additives, environmental conditions, and secondary biocidal properties.

Available for download

51318-11223-Evaluation of Top-of-Line Corrosion Model for Multiphase Oil and Gas Environments

Product Number: 51318-11223-SG

Author: H. Li / K. M. Yap / S. Srinivasan

Publication Date: 2018

$20.00

The model was evaluated and effects of various parameters on corrosion rates are described. Corrosion rates obtained from the model are compared with actual field and lab testing data as a basis to quantify accuracy and efficacy.

Available for download

A Guide to Industrial Corrosion Management Implementation (E-Book)

Product Number: 37637-E

ISBN: 978-1-57590-371-2

Author: Ali Morshed

Publication Date: 2018

$125.00

Corrosion management (CM) is a rather new concept and expertise. Its origins go back to early 2000's. The CM concept emerged from the UK's offshore oil and gas industry; from where the author also started his professional career.

Due to this newness and a vast multitude of application benefits, there has been a constant growth in demands for the provision of CM awareness, training, expertise and consultancy year after year.

The author has so far compiled a total of four CM books and this one is the last in the series. It is also the most comprehensive among the four books, with a greater emphasis and focus on CM field implementation.

Therefore, if one intends to implement CM across their asset(s), then this book could provide them with the required advice, instructions and guidelines on proper CM field implementation for both hydrocarbon and non-hydrocarbon industries.

The book covers subjects from how to define the scope of work to report writing and communicating the latest integrity findings.

It is written in a simple and jargon-free language and intended for various disciplines including: corrosion and integrity engineers, inspection engineers, pipeline engineers, process engineers, maintenance engineers and asset integrity managers

2018 NACE E-Book.

Available for download

A New High Performance Biguanide Polyammonium-Based Blend For Control Of Microbiological Fouling In Oil And Gas Stimulation

Product Number: 51321-16556-SG

Author: Christy C. Wentworth, Ph.D./ Jeffrey F. Kramer, Ph.D.

Publication Date: 2021

$20.00

Available for download

A Novel Internal Corrosion Risk Management Methodology for Relief Lines

Product Number: 51323-19468-SG

Author: Ayman A. Alabdullatif, Faisal M. Al-Abbas, Rakan A. Al-Shebil, Lay Seong Teh

Publication Date: 2023

$20.00

RLs are susceptible to internal corrosion that is influenced mainly by fluid corrosiveness including factors such as temperature, pH, carbon dioxide (CO2) and hydrogen sulfide (H2S) content, water chemistry, flow stagnation, wettability, and presence of deposits.

Generally, for corrosion to occur there must be liquid water with sufficient quantity to wet the pipe surface. Once water wet, the line will corrode at a rate determined by the chemistry of the water, acidity and quantity of deposits.

Products tagged with 'oil and gas'

Association for Materials Protection and Performance