AMPP Store - Products tagged with 'pressure vessels'

Available for download

AMPP SP21534-2024, Materials and Fabrication Requirements for Carbon Steel Pressure Vessels in Petroleum Refining Wet H2S Environments

Product Number: AMPP SP21534-2024

Publication Date: 2024

$109.00

This AMPP standard defines standard practices for new carbon steel (CS) pressure vessels to be used in petroleum refining wet hydrogen sulfide (H2S)-containing environments, with the recommended steps for resisting the damage mechanisms listed below. It covers materials, welding, testing, and other fabrication requirements. It is intended to be used by refiners, equipment fabricators, engineering contractors, and construction contractors.

Available for download

Corrosion Under Insulation (CUI) Management – A Case History

Product Number: 51219-196-SG

Author: David A. Hunter

Publication Date: 2019

$20.00

Pond investigated pressure vessel tank failures which are causing recurring maintenance of $250,000 per year. This challenging project had limitations of space, operational time pressures/vessel availability requirements, cost and replacement variables. This presentation will chronical problems and discuss best practices of specifications, material selection, surface preparation, and application inspection that would have prevented the aforementioned outcome. This paper discusses the fundamentals of composite coatings, industry accepted design standards for their use, and examples of typical uses for these materials that solve problems in varied industries.

Available for download

NACE Publication 8X194-2006-SG, Materials and Fabrication Practices for New Pressure Vessels Used in Wet H2S Refinery Service

Product Number: 24179-SG

ISBN: 8X194 Materials

Publication Date: 2006

$109.00

Materials selection, fabrication, postweld heat treatment, inspection, and testing practices for pressure vessels to reduce the likelihood of low-temperature hydrogen damage in wet H2S environments.

Available for download

RP0296-2004 (Chinese), Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

Product Number: 21115-SG

ISBN: 1-57590-013-0

Publication Date: 2004

$179.00

检测、修补和缓解炼厂压力容器在湿H2S环境下发生开裂的

DOWNLOADABLE HISTORICAL DOCUMENT. Detection, repair, and mitigation of cracking of carbon steel pressure vessels, including columns, heat exchangers, drums, reboilers & separators in wet H2S petroleum refinery environments.

Available for download

SP0472-2020, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Product Number: SP0472-2020

ISBN: 1-57590-114-5

Publication Date: 2020

$109.00

This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment, including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases. Weldments are defined to include the weld deposit, base metal HAZ, and adjacent base metal zones subject to residual stresses from welding. It defines standard practices for producing weldments in P-No. 1 steels resistant to environmental cracking in corrosive petroleum refining environments. This standard is maintained by Task Group 326.

Products tagged with 'pressure vessels'

AMPP SP21534-2024, Materials and Fabrication Requirements for Carbon Steel Pressure Vessels in Petroleum Refining Wet H2S Environments

Corrosion Under Insulation (CUI) Management – A Case History

NACE Publication 8X194-2006-SG, Materials and Fabrication Practices for New Pressure Vessels Used in Wet H2S Refinery Service

RP0296-2004 (Chinese), Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

SP0472-2020, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Association for Materials Protection and Performance