AMPP Store - Products tagged with 'iccp'

Available for download

51318-11168- Impressed Current Anode system for Jetty Piling protection-Case Study

Product Number: 51318-11168-SG

Author: Shailesh Javia

Publication Date: 2018

$20.00

Design and implementation of cathodic protection (CP) on a new construction jetty in the Far East. We will discuss the design, materials, installation and commissioning of impressed current cathodic protection system using mixed metal oxide sled anodes for CP of metallic piles.

Available for download

51318-11218-A Case Study of Soil-Side Corrosion of Aboveground Storage Tanks in the Middle East

Product Number: 51318-11218-SG

Author: Hanan Farhat

Publication Date: 2018

$20.00

Soil-side corrosion of the bottom plates of aboveground storage tanks is the main cause of tank failure. A case study is discussed in this paper, in which failures of three storage tanks were investigated. Soil analysis revealed high salt content and low resistivity.

Available for download

Case Study of Hybrid Onshore-Offshore CP Life Extension Retrofit for East Texas Facility

Product Number: 51324-20974-SG

Author: Yuxi Duan; Colette Brogna-Nichols

Publication Date: 2024

$40.00

Dock components of an East Texas oil and gas facility required a cathodic protection retrofit, however the scour in the area precluded traditional bottom-laid anode approaches. A pre-existing impressed current cathodic protection (ICCP) system protecting onshore assets was integrated with the offshore components to protect and extend the useful life of the associated facility docks and near-shore assets. Scour-protected bonds were used to integrate the onshore ICCP system to offshore assets, reducing the cathodic protection (CP) retrofit’s design footprint. Sacrificial anodes were installed where cable voltage drop and/or seabed scouring operations precluded bonding to the onshore ICCP system. This case study demonstrates that an ICCP-first hybrid retrofit is capable of protecting both offshore and onshore assets. The sacrificial anode cathodic protection (SACP) retrofit provided CP to remote dolphins and piles where installing bonding cables would have been impractical, given that routine scouring is expected in the area. The inspection data shows that above-ground storage tanks (ASTs), coated onshore pipelines, dock structures, both the land- and water-side bulkheads, and near-shore piles and dolphins can simultaneously meet NACE CP criteria with a properly-designed CP continuity retrofit.

Available for download

Considerations Associated with the Selection of Electrochemical Protection Systems for Reinforced Concrete Structures

Product Number: 51323-19045-SG

Author: Atef Cheaitani, Samir Cheytani, Martin Cheytani

Publication Date: 2023

$20.00

Impressed current cathodic protection (ICCP) for reinforced concrete structures has been installed on numerous bridges and wharves in Australia over the past 40 years. The exposure conditions at the majority of these bridges and wharves made them more susceptible to chloride-induced corrosion.

The ICCP systems in Australia are designed, installed and monitored in accordance with the global cathodic protection standards such as AMPP Standard SP 0290-2019, International Standard ISO 12696:2022, and Australian Standard AS 2832.5 – 2008 (R2018).

Available for download

Life Extension of Offshore Field in the Santa Barbara Channel 1: Simultaneous ICCP Retrofit of Three Jacket Platforms

Product Number: 51323-18978-SG

Author: Sami Abu-Zahra, Omar Rosas-Camacho, Mathew L. Taylor

Publication Date: 2023

$20.00

Three platforms in the Santa Ynez Unit (SYU) field in the Santa Barbara Channel, platforms Heritage (HE), Harmony (HA), and Hondo (HO), were installed between 1979 and 1989, approximately 19 km (12 miles) west of Goleta, California in water depths between 259 m (850 ft) to 365 m (1200 ft). These platforms were previously retrofitted with ICCP sleds which were in decline, requiring additional Impressed Current Cathodic Protection (ICCP) anode output. Therefore, they were all retrofitted with additional ICCP systems in a single campaign to provide a 25-year life extension.

Available for download

Life Extension of Offshore Field in The Santa Barbara Channel 2: Multi-Objective Optimization of Retrofit ICCP Anode Sled Placement Using Calibrated 3D Simulations

Product Number: 51323-19382-SG

Author: Matthew L. Taylor, Omar Rosas Camacho, Sami Abu-Zahra

Publication Date: 2023

$20.00

The life of offshore jacket structures can be extended up to 30 years towards the end of their design life by retrofits. For larger structures, and in unusual cases, semi-remote ICCP anode sleds are a favorable option compared to sacrificial anode cathodic protection (SACP) due to the high current output from each individual installation, reducing the time to install substantially. Anode sled locations are determined based on site plans, experience, survey data, and equations evaluating “remoteness” or “voltage rise” criteria.

Available for download

NACE SP0572-2024, Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Systems

Product Number: NACE SP0572-2024

Publication Date: 2024

$109.00

The purpose of this AMPP standard practice is to present procedures and practices for the design, installation, operation, and maintenance of deep anode systems used for the control of external corrosion of underground or submerged metallic structures by impressed current cathodic protection (ICCP). It is intended to be used in conjunction with NACE SP0169 and SP0177. This standard is intended to be used by corrosion engineers, corrosion consultants, representatives from manufacturers, and others concerned with corrosion control of underground structures.

Available for download

SP0390-2019, Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures

Product Number: 21044-2019

ISBN: 1-57590-059-9

Publication Date: 2019

$109.00

Reaffirmed (with editorial changes) in 2019. Presents corrosion control guidelines that are applicable to existing atmospherically exposed structures made of concrete conventionally reinforced with carbon steel. These guidelines should be used primarily when repair or rehabilitation is being implemented because of deterioration resulting from the corrosion of steel reinforcement. Includes sections on Periodic Inspection and Routine Maintenance of reinforced-concrete structures (site survey, structural survey, repair options), Assessment of Reinforced Concrete Structures, and Corrosion Control Techniques and Repair Strategy. Corrosion control techniques that are described include surface treatments, removal of concrete, and electrochemical treatments, including ECE, ER, and cathodic protection.

Available for download

SP21434-2020, Cathodic Protection Systems for the Mitigation of External Corrosion of Buried and Submerged Metallic Piping Systems at Nuclear Power Plants

Product Number: 21434-2020

Publication Date: 2020

$109.00

New in 2020! This standard presents accepted methods and practices regarding the use of cathodic protection (CP) for the control of external corrosion on buried or submerged carbon steel, stainless steel, gray cast iron, ductile cast iron, copper, and aluminum piping systems at nuclear power plants. This standard may be useful at facilities other than nuclear power plants that contain complex networks of buried or submerged piping, which may be composed of more than one material and may or may not be grounded.

Products tagged with 'iccp'

Association for Materials Protection and Performance