AMPP Store - Products tagged with 'hydrochloric acid'

Available for download

05520 The First ETFE Lined Dual-Laminate Equipment: A Case Study, After 13 Years of Service

Product Number: 51300-05520-SG

ISBN: 05520 2005 CP

Author: Debra McCauley, DuPont; Steven R. Linnemann, RL Industries Inc.

Publication Date: 2005

$20.00

Development of the new fluoropolymer Ethylene-tetrafluoroethylene (ETFE) and severe service environment conditions prompted ETFE’s use as a fabric backed lining laminate in dual-laminate fiberglass reinforced plastic (FRP) storage tanks – the first ever such use of this fluoropolymer.

Available for download

51312-01443-SUMMARY OF SOME NICKEL ALLOYS USED IN CHEMICAL PRODUCTION INVOLVING HYDROCHLORIC AND SULFURIC ACIDS

Product Number: 51312-01443-SG

ISBN: 01443 2012 CP

Author: Larry D. Paul

Publication Date: 2012

$20.00

Sulfuric and hydrochloric acids are among the most common chemicals produced.in the process industry. Nickel alloys have been a traditional material of choice. This paper will review the alloys available for this service as well as identify the temperature limits and other conditions that should be considered when selecting an alloy.

Available for download

51317--9542-Silicon-Based CVD Nanocoatings for Corrosion Resistance and Advanced Surface Properties

Product Number: 51317--9542-SG

ISBN: 9542 2017 CP

Author: Min Yuan

Publication Date: 2017

$20.00

This study will provide an overview of silicon-based chemical vapor deposition (CVD) nanocoatings that, when applied to stainless steel and other alloys, fight corrosion while simultaneously easing design, fabrication, and integration of coated components.

Available for download

51317--9639-The Performance of Corrosion Resistant Ni-Cr-Mo Alloys in Concentrated Hydrochloric Acid

Product Number: 51317--9639-SG

ISBN: 9639 2017 CP

Author: Suresh Divi

Publication Date: 2017

$20.00

This paper is to study the corrosion performance of various Ni based alloys in high concentrations of HCl acids below the boiling point. Nickel-based alloys C-276 (UNS N10276), C-22 (UNS N06022), C-2000 (UNS N06200), Hybrid-BC1 (UNS N10362) and B-3 (UNS N10675) were investigated.

Available for download

51318-10807-Corrosion Inhibition of Stainless Steel in 0.5 M HCl by C6H5NH2

Product Number: 51318-10807-SG

Author: Olugbenga Adeshola OMOTOSHO / Joshua Olusegun OKENIYI / Abimbola Patricia POPOOLA

Publication Date: 2018

$20.00

In this study, different concentrations of C6H5NH2 (Aniline) were employed for investigating its corrosion inhibition of stainless steel in 0.5 M HCl.

Available for download

51318-10954-A comparison of the structure and consumption rate for Centrifugally cast Anodes compared with die-cast Anodes

Product Number: 51318-10954-SG

Author: Chris D. Jennings

Publication Date: 2018

$20.00

This paper will discuss, examine, and conclude on the metallurgical differences and effectiveness between the centrifugal-cast silicon iron tubular anode and Die-cast silicon iron tubular anode based on the research and testing performed and reported by Independent Laboratory Testing.

Available for download

51318-11087-Corrosion Behavior of Additively Manufactured Alloy N06210 in acidic solutions

Product Number: 51318-11087-SG

Author: Yuzo DAIGO / Katsuo SUGAHARA / Syuhei OGOSHI / Kosuke KUWABARA

Publication Date: 2018

$20.00

Corrosion rates of low porosity AM S31603 and AM N06210 in several kinds of acidic solutions were similar to those of wrought alloys respectively, the corrosion rates of AM S31603 and AM N06210 became higher with increasing porosity of each specimen.

Available for download

51318-11329-Sensitization Study of Corrosion-Resistant Nickel-Alloys

Product Number: 51318-11329-SG

Author: Ajit Mishra

Publication Date: 2018

$20.00

Mill-annealed coupons of UNS N10276, N06022 and N06035 alloys were heat-treated at different times and temperatures, then tested in ASTM G-28A solution followed by internal attack measurement through optical microscope.

Available for download

98417 TITANIUM AS REACTOR MATERIAL FOR SCWO APPLICATIONS.FIRST EXPERIMENTAL RESULTS

Product Number: 51300-98417-SG

ISBN: 98417 1998 CP

Author: N. Boukis, C. Friedrich, E. Dinjus

Publication Date: 1998

$20.00

Titanium does not show the required mechanical strength for high temperature high pressure applications and it can only be used to form liners for an SCWO apparatus. Therefore, pressure tubes made of alloy 625 were lined with titanium grade 2, Additionally corrosion tests with coupons made of titanium grades 2, 5, 7, 12 and P-C were performed.

Available for download

Acid-Induced Corrosion of Hospital Facilities from Construction Processes

Product Number: 51323-19062-SG

Author: Kimberly Steiner

Publication Date: 2023

$20.00

A new building was under construction for a hospital campus for specialized treatment. For logistical reasons, a multi-million dollar piece of medical equipment was placed in one room prior to completion of construction. A pedestal is installed on the floor and houses copper gas tubing and electrical connections for the equipment.

Available for download

Alloy UNS N06058: A solution for demanding corrosive applications where common members of the Ni-Cr-Mo alloys experience their limits

Product Number: 51320-14557-SG

Author: D. Niespodziany, R. Behrens, H. Alves

Publication Date: 2020

$20.00

The high performance alloy UNS N06058 contains about 21 wt.-% chromium and at least 18.5 wt.-% molybdenum. It is the first member of the Ni-Cr-Mo alloys intentionally strengthened with nitrogen. Based in the combination of its alloying constitutes this alloy is highly resistant to oxidizing as well as to reducing corrosive media. Evidenced by the high Pitting Resistance Equivalent (PRE) number of about 86 the alloy UNS N06058 shows an outstanding resistance to localized corrosion as well.

The objective of this paper is to outline the characteristics of alloy UNS N06058 and therefore to highlight the successful use of it in demanding corrosive applications in the process industry and other sectors.

Main characteristics such as microstructure, mechanical properties and fabrication will be discussed. The very good weldability of alloy UNS N06058 has been verified by the German TÜV1. A matching filler metal, which is officially qualified according to AWS 5.14 (American Welding Society)2, is available. In addition, prior work shows that alloy UNS N06058 can be reliably explosion clad. Furthermore, corrosion resistance determined under laboratory conditions as well as in field studies will be presented not only for the base material but also exemplary on welded and cladded samples. Examples of applications will complete the comprehensive overview of this work.

Available for download

Corrosion Inhibition Of Carbon Steel In Carbonate Acidizing At Elevated Temperature

Product Number: 51322-17562-SG

Author: Limin Xu, Tao Chen, Ming Han, Mohammed Bataweel

Publication Date: 2022

$20.00

A suitable acid package in matrix acidizing application is very important to the stimulation employed to improve the productivity of carbonate reservoirs. Typically, concentrated acids between 5 and 28 wt% are used and the most used mineral acid for carbonate acidizing treatment is hydrochloric acid (HCl) ^1,2. A significant challenge of acidizing treatment is corrosion loss of metal tubulars due to the high reactivity of acid and metal, especially at high temperatures. Corrosion inhibitors are needed to reduce the corrosion loss of steel surface of facilities exposed in acidic environment.

Products tagged with 'hydrochloric acid'

Association for Materials Protection and Performance