AMPP Store - Products tagged with 'current requirements'

Available for download

29 CFR 1926.1200 - The New OSHA Standard for Construction in Confined Spaces - What’s Different from the General Industry Standard

Product Number: 41216-950-SG

Author: Charles S. Brown

Publication Date: 2016

$20.00

For over 20 years OSHA has been working on getting a Construction Standard for Confined Spaces into the workplace and it has finally arrived. This paper will give a brief background on the standard development as well as go over the new standard and definition of what is a confined space.

Available for download

Breathing the Fresh Air of Compliance: Establishing an OSHA Compliant Respiratory Protection Program

Product Number: 41215-880-SG

Author: Nicholas P. Bozzuto

Publication Date: 2015

$20.00

With over 5 million respirator users in approximately 1.3 million United States workplaces, Respiratory Protection is a perennial “Top 5” most cited OSHA violation. 2013 saw 3,995 violations, taking fourth place and increasing 64% from 2012 (also the fourth-most cited standard) (1). The number one reason for citation – lack of a written program. 29CFR1910.134 is the OSHA standard that covers Respiratory Protection (2). A written program is required in any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer.

Available for download

Developing an Efffective Coating Specification

Product Number: 51216-017-SG

Author: Breck Vernon

Publication Date: 2016

$20.00

This presentation will describe best practices for preparing a quality specification for applying protective coatings and linings to industrial structures. A well-prepared specification helps ensure that the contractor performs the work required in the allotted time. The presentation will focus on developing appropriate requirements for applying coatings and linings to obtain maximum system performance, service life, and protection of substrates in the prevailing service environment.

Available for download

Industry Standards: Are You Current?

Product Number: 41216-955-SG

Author: William D. Corbett

Publication Date: 2016

$20.00

Coating specifications frequently reference industry standards from organizations such as SSPC, ASTM, ISO and NACE. While specifications may reference a specific version or “year,” many simply state, “the latest version of the standard applies.” Many standards writing organizations require a review of the content of their documents every 5-years (or more frequently), and updates/revisions to standards can and oftentimes do occur. And new standards are developed and published to fill voids when a need for a standard is identified.

Available for download

New Test Requirement for Evaluating Temperature Resistance of Nonskid Coatings

Product Number: 51218-155-SG

Author: Colton Spicer, Cameron Miller, James Tagert, John Wegand, Bruce Nelson

Publication Date: 2018

$20.00

Available for download

Pipings’ Kryptonite: Understanding Repair Options for Piping with Section Loss

Product Number: 41216-973-SG

Author: David A. Hunter

Publication Date: 2016

$20.00

The sheer volume of piping systems, both insulated and non-insulated, is daunting. Companies, in order to deal with limited inspection resources, have resorted to risk-based strategies in order to prioritize inspection of such systems. By the time surfaces and systems are inspected, they often exhibit wall loss, or pitting corrosion on surfaces. Piping is only as strong as the wall thickness of the original design. When corrosion reduces wall thickness to a minimum required thickness for the given pressure, actions must be taken.

Available for download

Preparation for SSPC QP 3 Shop Certification

Product Number: 51218-130-SG

Author: David Lemke

Publication Date: 2018

$20.00

PREPARATION FOR SSPC QP3 SHOP CERTIFICATION

Available for download

RP0186-1986, Application of Cathodic Protection for Well Casings

Product Number: 53059-HD1986

Author: NACE

Publication Date: 1986

$179.00

Procedures to determine the need for cathodic protection (CP) - including current requirements - for well casings and gas storage. Design and installation of CP systems. Operation and maintenance. Historical Document 1986

Available for download

Speed up Your Dry Film Thickness Measurements Using a Scanning Probe

Product Number: 41214-818-SG

Author: JF Fletcher

Publication Date: 2014

$20.00

Time is money and the ability to speed up the process of taking and analyzing coating thickness readings will always pay dividends in reducing inspection costs. Scanning an area of painted steel will always be quicker than taking individual readings but there was always the danger of wearing the probe and reducing its life.

Available for download

The History of Protective Coating Use in- US Nuclear Power Plant

Product Number: 51218-165-SG

Author: Jon R. Cavallo, Bob Walcheski

Publication Date: 2018

$20.00

Since the inception of the US commercial nuclear power program in the 1950’s, criteria have existed for ensuring the satisfactory performance of reactor containment protective coatings over the life of the plant. These criteria have been modified and updated periodically to reflect improvement of the industry and regulatory experience and knowledge bases. This presentation reviews the development of the current qualification requirements for US commercial nuclear power plant reactor containment coatings.

Available for download

Understanding the Breathing-Air System in Abrasive Blasting

Product Number: 41215-891-SG

Author: Thomas E. Enger

Publication Date: 2015

$20.00

The Occupational Safety and Health Administration (OSHA) defines abrasive blasting as “using compressed air or water to direct a high-velocity stream of an abrasive material to clean an object or surface, remove burrs, apply a texture or prepare a surface for the application of paint or other type of coating.” OSHA regulations governing General Industry, Construction, and Shipyards mandate the use of abrasive-blast respirators approved by the National Institute for Occupational Safety and Health (NIOSH). Blast respirators are Type-CE supplied-air respirators, commonly known as “blast helmets.” This article will review and explain the components and the requirements pertaining to the use of these respirators.

Available for download

What is So Special About Nuclear Coatings?

Product Number: 51218-133-SG

Author: Keith A. Miller

Publication Date: 2018

$20.00

This paper will cover what are"nuclear"coatings as well as special nuclear requirements.

Products tagged with 'current requirements'

Association for Materials Protection and Performance