Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.
During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.
Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!
HISTORICAL DOCUMENT. Method for screening corrosion-resistant alloys (CRAs) used in oilfield production environments. The SSR test for resistance to stress corrosion cracking (SCC) uses slow, dynamic strain applied at a constant rate.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
This standard establishes a slow strain rate (SSR) test method for screening corrosion-resistant alloys (CRAs) (i.e., stainless steels and nickel-based alloys) for resistance to stress corrosion cracking (SCC) at elevated temperatures in sour oilfield production environments. The SSR test, which is relatively short in duration, incorporates a slow, dynamic strain applied at a constant extension rate. This results in acceleration of the initiation of cracking in susceptible materials, thereby simulating rather severe conditions.
The standard specifies reagents, test specimen, test equipment, determination of baseline material properties, environmental and mechanical test conditions, test procedure, and analysis and reporting of test results. It is intended for use by laboratory investigators for screening CRAs for resistance to SCC in sour oilfield service.
This revision extends the scope of the standard to address the screening of precipitation-hardened nickel-based alloys for resistance to hydrogen induced stress cracking (HISC) using the SSR test method.
Determining the deposit weight density (DWD) on a boiler tube surface, via the glass-bead-blasting technique. Removes most boiler deposits. Useful when other methods fail.
DOWNLOADABLE HISTORICAL DOCUMENT. Test methods to evaluate coating systems for seawater immersion service on exterior surfaces of submerged offshore platform steel structures, piers, docks, pilings, subsea valves, and wellheads.
This method tests the vapor-inhibiting ability (VIA) of volatile corrosion inhibitor (VCI) materials. Evaluates vapor transport and corrosion protection with simple, low-cost apparatus.
Test method to measure properties and stability of Cu/CuSO4 permanent reference electrodes (PREs) under environmental stress. Specifically measures migration of CuSO4 from - and chloride into - the PRE.
管道、压力容器抗氢致开裂钢性能评价的试验方法
Evaluation of pipeline and pressure vessel steels. Comparing test results from different laboratories of the absorption of hydrogen generated by corrosion of steel in wet H2S.
Evaluating elastomeric materials for use in sour liquid environments. Accelerated aging procedure. Hyperbarics. For testing O-rings or elastomeric vulcanizates cut from standard sheets.
Test method for carbon dioxide (CO2) at hyperbaric pressures and temperatures at or above 50°C (122°F). A tool for evaluation of elastomeric materials in CO2 environments. Task Group 483.
Evaluate the relative resistance of fiber-reinforced plastic (FRP) pipe and tubulars to specific oilfield environments by comparison of tensile strength before and after exposure. Reagents. Specimens. Equipment.
Methods to evaluate performance of atmospheric and splash zone maintenance coating systems on platforms. Fixed-leg, semi-submersible, tension-leg, and floating production storage offloading (FPSO).