AMPP Store - Oil and Gas

Available for download

Rust Creepage Mechanism for Offshore Atmospheric Coatings

Product Number: 51323-18754-SG

Author: Benjamin T. A. Chang

Publication Date: 2023

$20.00

The service life of current offshore platform coatings are normally less than 10 years. It is very expensive ($100/ft2) to rehabilitate the offshore platform coatings in the field. Therefore, facility owners are very anxious to select the long-life coatings. The candidate coatings are normally tested in the lab following the ISO 12944-91 or the AMPP TM216122 standard.

Available for download

SP0104-2020 The Use of Coupons for Cathodic Protection Monitoring Applications

Product Number: SP0104-2020

ISBN: 1-57590-196-X

Publication Date: 2020

$109.00

Revised in 2020! Cathodic protection (CP) coupons have been used since the 1930s by pioneers of the corrosion control industry, both in North America and in Europe. They have been shown to be a practical tool for determining the level of polarization of a structure and to confirm the IR drop in a potential measurement.

The purpose of this standard is to provide a method for evaluating the effectiveness of a CP system using coupons. It is intended for use by people who design and maintain CP systems for buried or submerged pipelines, underground storage tanks (USTs), on-grade storage tank bottoms, reinforcing steel in concrete, water storage tanks, and various other structures in buried or aqueous environments.

The body of the standard primarily addresses applications for coupons attached to buried pipelines. Appendixes cover the use of coupons for other applications, including USTs, aboveground storage tanks, internal surfaces of water tanks, and reinforced concrete structures.

This revision adds new appendixes on the use of coupons on cased pipelines and the use of coupons to measure alternating current interference data.

Available for download

SP0296-2016 (formerly RP0296), Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H2S Environments

Product Number: 21078-SG

ISBN: 1-57590-013-0

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Cracking in wet H2S petroleum refinery environments. Detection, repair, and mitigation of cracking of existing carbon steel refinery equipment.

Available for download

SP0296-2020, Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H2S Environments

Product Number: SP0296-2020

Publication Date: 2020

$109.00

This standard is intended to be a primary source of information on cracking in wet H2S petroleum refinery environments and provides guidelines on the detection, repair, and mitigation of cracking of existing carbon steel refinery equipment in wet H2S environments.

Available for download

SP0303-2020 (formerly RP0303), “Field-Applied, Heat-Shrinkable-Sleeve Coating System for Pipelines: Application, Performance, and Quality Control”

Product Number: SP0303-2020

ISBN: 1-57590-177-3

Publication Date: 2020

$109.00

This NACE International standard practice provides current technology and industry practices for the use of field-applied heat-shrinkable-sleeve coating systems. The standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, and construction engineers and managers. It is applicable to underground steel pipelines in the oil and gas gathering, distribution, and transmission industries.

The standard practice presents guidelines for establishing minimum requirements to ensure proper application and performance of field-applied, heat-shrinkable sleeves to the external surfaces of coated pipe. Included are methods for (1) qualifying and controlling the quality of a heat-shrinkable sleeve, (2) guidelines for proper application, and (3) inspection and repair techniques to ensure its long-term performance. The standard is applicable to coating systems used to prevent corrosion in conjunction with cathodic protection, and heat-shrinkable wraparound- or tubular-type sleeve coating systems on underground steel pipelines.

Available for download

SP0472-2015 "Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments"

Product Number: 21006-SG

ISBN: 1-57590-114-5

Publication Date: 2015

$179.00

HISTORICAL DOCUMENT. Guidelines to prevent environmental cracking of weldments in carbon steel refinery equipment and piping. Welding processes: SMAW, GMAW, FCAW, GTAW and SAW.

Available for download

SP0472-2020, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Product Number: SP0472-2020

ISBN: 1-57590-114-5

Publication Date: 2020

$109.00

This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment, including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases. Weldments are defined to include the weld deposit, base metal HAZ, and adjacent base metal zones subject to residual stresses from welding. It defines standard practices for producing weldments in P-No. 1 steels resistant to environmental cracking in corrosive petroleum refining environments. This standard is maintained by Task Group 326.

Available for download

SP0575-2007 (formerly RP0575), Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels

Product Number: 21015-SG

Publication Date: 2007

$179.00

HISTORICAL DOCUMENT. Cathodic protection to all oil-treating vessels. Includes design criteria, selection, and installation of applicable systems, and the operation, monitoring, and maintenance of installed systems.

Available for download

SP21464-2020, Erosion Management in the Oil and Gas Industry

Product Number: SP21464-2020

Publication Date: 2020

$109.00

Erosion is defined by NACE International as “The progressive loss of material from a solid surface resulting from mechanical interaction between that surface and a fluid, a multicomponent fluid, or solid particles carried with the fluid.”

This SP provides guidance on internal erosion and erosion-corrosion management. Guidance is given for erosion and erosion-corrosion threat assessment/prediction, barrier selection, monitoring, inspection, risk assessment and data management. This SP covers mainly sand caused erosion. However, the guidance in this document can be used for other solid particles.

This SP is applicable to tubular products, e.g., tubing, pipelines, flowlines, risers, valves, and piping systems.

Available for download

SSPC-AB 3-2017, Ferrous Metallic Abrasive

Product Number: SSPC-AB 3-2017

Publication Date: 2017

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-AB 3-2023, Ferrous Metallic Abrasive

Product Number: SSPC-AB 3-2023

$109.00

This standard contains the requirements for ferrous metallic abrasive used for the removal of rust, mill scale, paint, or other surface coating systems by blast cleaning.

This standard covers previously unused abrasive material. It does not address cleanliness of recycled abrasive processed through field or shop abrasive blast cleaning units. Requirements for recycled ferrous metallic abrasive are contained in SSPC-AB 2.

Available for download

SSPC-AB 4-2016, Recyclable Encapsulated Abrasive Media (in a compressible cellular matrix)

Product Number: SSPC-AB 4-2016

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT.

Oil and Gas

Association for Materials Protection and Performance